Pond Volume Calculator
Pond volume
Machine-readable tool index
FishMatch AI Agent Hub: Every Tool, Calculator and RFQ Path in One Page
Every public FishMatch tool in one place: 56 aquaculture calculators, 6 workflow tools, the RFQ entry points and the public agent endpoints — each with what it does, what it needs, what it returns and what it does not establish.
Short answer
Where can an AI agent find every FishMatch tool, calculator and RFQ path?
This page is the complete index of FishMatch tools for AI agents and buyers: every calculator (biomass, stocking density, oxygen, water exchange, pump sizing, filtration, RAS sizing, feed, power, operating cost, CAPEX and ROI), the workflow tools (Project Sizer, RFQ Wizard, RFQ Builder, proposal comparison, buyer portal, human advisor), the RFQ entry points, and the public MCP endpoints for submitting a fish farm RFQ and checking its status. Every output is a planning estimate, never an engineering design.
- Calculators:
- 56 planning calculators, fish and shrimp
- Workflow tools:
- 6 tools from sizing to proposal comparison
- RFQ paths:
- 7 entry points, project or category led
- Agent access:
- Public MCP endpoints plus llms.txt
- Languages:
- English plus 11 translated languages
- Output status:
- Planning estimates — never engineering designs
All calculators
Every tool listed here returns a planning estimate used to structure requirements and RFQs. None of them is an engineering design, a biological production plan, or a guarantee of survival, FCR, growth, water quality, production output, energy saving or return.
Biomass Calculator
Estimates standing biomass from stock numbers, average weight and expected survival so a project can state a biomass figure instead of only an annual tonnage target.
- Inputs:
- Number of animals stocked, Average target weight, Assumed survival rate
- Returns:
- Estimated standing biomass in kilograms or tonnes at the stated point in the cycle.
- Does not establish:
- Survival and growth assumptions are user-supplied planning inputs. Actual biomass depends on genetics, health status, water quality, feed and husbandry.
- Scope:
- Fish and shrimp; tanks, ponds, cages, hatchery and nursery stages.
Stocking Density Calculator
Converts biomass and water volume into a stocking density figure, or the reverse, so tank, pond or cage configuration can be discussed with a number attached.
- Inputs:
- Water volume or surface area, Target biomass, Species and system type
- Returns:
- Density expressed per cubic metre or per hectare, plus the implied unit count.
- Does not establish:
- Acceptable density is species-, system- and welfare-specific and must be confirmed by a qualified biologist and local regulation.
- Scope:
- Fish and shrimp; RAS and flow-through tanks, ponds and cages (density basis differs per system).
Oxygen Requirement Calculator
Estimates the oxygen demand implied by biomass, temperature and feeding assumptions so aeration and oxygenation scope can be discussed before quotations.
- Inputs:
- Standing biomass, Water temperature, Feeding rate assumptions
- Returns:
- Indicative oxygen demand per hour or per day as a planning range.
- Does not establish:
- Not a dissolved-oxygen design. Real demand varies with metabolism, feeding events, stress and system hydraulics, and must be confirmed by the system designer.
- Scope:
- Fish and shrimp; RAS, tanks and ponds. Cage sites depend on ambient exchange rather than installed oxygenation.
Feed Conversion Ratio Calculator
FCR
Fish Growth Calculator
Growth days
Water Exchange Calculator
Estimates exchange or turnover volumes from system volume and the exchange rate assumed for the production system.
- Inputs:
- System water volume, Assumed exchange or turnover rate, Operating hours
- Returns:
- Indicative daily and hourly water volumes to be supplied and discharged.
- Does not establish:
- Does not assess water availability, abstraction rights, effluent limits or treatment requirements. Those are regulatory and engineering questions.
- Scope:
- Flow-through, pond and partial-reuse systems, plus RAS make-up water. Not a cage parameter.
Harvest Profit Calculator
Harvest profit
Project ROI Calculator
Project ROI
Pump Sizing Calculator
Produces an indicative pump duty point from required flow and estimated head so pumping scope can be stated in an RFQ.
- Inputs:
- Required flow rate, Static and friction head estimates, Operating hours
- Returns:
- Indicative flow-and-head duty plus an approximate power draw.
- Does not establish:
- Not a hydraulic design. Pipe routing, fittings, NPSH, redundancy and control strategy must be engineered by a qualified party or the supplier.
- Scope:
- RAS, flow-through and pond systems with pumped circulation or intake.
Biofilter Sizing Calculator
Gives an indicative filtration load from biomass and feeding assumptions so mechanical and biological filtration scope can be included in the RFQ.
- Inputs:
- Standing biomass, Daily feed quantity, System type and target turnover
- Returns:
- Indicative solids and nitrogen loading with implied filtration capacity ranges.
- Does not establish:
- Filter selection, media volumes and process guarantees remain the responsibility of the RAS engineering company or equipment supplier.
- Scope:
- RAS and intensive recirculating or partial-reuse systems. Ponds and cages use different water-quality strategies.
Shrimp Farm Calculator
Shrimp farm
RAS Sizing Calculator
Translates a production target into indicative RAS tank volume, flow, oxygen and filtration ranges for early project framing.
- Inputs:
- Annual production target, Species, Target harvest weight and density assumptions
- Returns:
- Indicative tank volume, recirculation flow, oxygen and filtration ranges.
- Does not establish:
- A planning envelope, not a RAS design. Detailed engineering, process guarantees and commissioning belong to the selected engineering company.
- Scope:
- RAS only — fish species in land-based recirculating tanks.
Feed Budget Calculator
Estimate annual feed tonnage and cost from production, FCR and feed price.
Round Tank Volume Calculator
Round tank volume
Solar Aquaculture ROI Calculator
Solar payback
Solar ROI & Payback (Load + Diesel + Tariff)
Solar payback (full)
Solar Pump Sizing Calculator
Solar pump PV
Battery Storage Sizing Calculator
Battery kWh
Operating Cost (OPEX) Calculator
Builds an indicative annual operating-cost picture from feed, energy, labour and maintenance assumptions.
- Inputs:
- Feed quantity and price, Energy consumption and tariff, Labour, maintenance and other recurring costs
- Returns:
- Indicative annual operating cost by category.
- Does not establish:
- Cost inputs are user-supplied. No profitability, yield or return outcome is implied or guaranteed.
- Scope:
- All systems, fish and shrimp.
Aquaculture Power Requirement Calculator
Aggregates the connected load implied by pumping, aeration, filtration, feeding and ancillary equipment.
- Inputs:
- Equipment list with rated power, Duty cycles, Operating hours
- Returns:
- Indicative connected load and daily energy consumption.
- Does not establish:
- Does not evaluate grid quality, tariff structure, protection design or electrical compliance. No energy-saving outcome is implied.
- Scope:
- RAS, pond aeration and processing/site loads; cage sites only where feed barges or shore power apply.
Aquaculture Generator Sizing Calculator
Genset kVA
Commercial Aquaculture CAPEX Estimator
Structures an indicative capital-expenditure breakdown across equipment, civil works, installation and contingency.
- Inputs:
- Production target and system type, Known equipment and civil cost assumptions, Contingency percentage
- Returns:
- Indicative CapEx breakdown with a total planning range.
- Does not establish:
- Not a quotation. Real pricing comes from manufacturers and contractors against a defined scope; exclusions materially change totals.
- Scope:
- All systems, fish and shrimp.
Commercial Aquaculture ROI & IRR Calculator
Models an indicative return picture from user-supplied revenue, cost and capital assumptions.
- Inputs:
- CapEx estimate, Operating cost estimate, Production volume and price assumptions
- Returns:
- Indicative payback and return figures based entirely on the assumptions entered.
- Does not establish:
- No return is promised or predicted. Outcomes depend on biological, market, environmental and operational conditions outside the tool.
- Scope:
- All systems, fish and shrimp.
Aquaculture Energy Cost Calculator
Annual energy $
Aquaculture Water Consumption Calculator
Water use
Commercial Oxygen Demand & LOX Cost Calculator
O₂ demand + LOX $
Commercial Feed Consumption & Budget Calculator
Estimates feed quantity over a production cycle from biomass growth and an assumed feed conversion ratio.
- Inputs:
- Starting and target biomass, Assumed FCR, Cycle length
- Returns:
- Estimated total and periodic feed quantities.
- Does not establish:
- FCR is a user assumption, not a guaranteed outcome. Actual feed use depends on feed quality, temperature, health and feeding management.
- Scope:
- Fish and shrimp across all systems.
Aquaculture Processing Plant Capacity Calculator
Processing plant
Aquaculture Cold Storage & Refrigeration Calculator
Cold storage kW
Aquaculture Financing & Loan Amortization Calculator
Loan / DSCR
Aquaculture Aeration Calculator
Aeration sizing
Aquaculture Farm Expansion Planner
Expansion planner
Shrimp Harvest Vacuum & Pump Sizing
Vacuum sizing
Hatchery Capacity Calculator
Hatchery capacity
Aquaculture Water Treatment Calculator
Water treatment
Fish & Shrimp Farm Equipment Cost Calculator
Equipment cost
Shrimp Survival Rate Profit Calculator
See how survival rate moves shrimp farm revenue and profit per cycle.
RAS Water Turnover Calculator
Flow rate, turnover time and make-up water for a recirculating system.
Aquaculture TCO Comparison Calculator
Compare two project options on 5-year total cost of ownership and cost per kg.
Shrimp Production Cost per Kg Calculator
Break down what a kilo of farmed shrimp actually costs to produce.
Shrimp Feed Requirement Calculator
Daily feed, cycle feed volume and feed cost for a shrimp cycle.
Shrimp Pond Aeration Calculator
Preliminary aeration horsepower, unit count and energy cost for a shrimp pond.
Shrimp Dissolved Oxygen Risk Planner
Operational oxygen risk screen for a shrimp pond or tank.
Shrimp Farm Energy Calculator
Total farm electricity: aeration, pumping, oxygen, feeding, treatment and cost per kg.
RAS Bid Normalizer
Normalise a RAS or aquaculture quotation into CAPEX per tonne, CAPEX per standing biomass, energy per kg and scope-gap flags.
Cost of Poor FCR Calculator
FCR cost impact
Expansion Readiness Assessment
Expansion readiness
Aquaculture Cost Pressure Calculator
Cost pressure
Aquaculture CAPEX Estimator
CAPEX estimator
Aquaculture OPEX Estimator
OPEX estimator
RAS Feasibility Calculator
RAS feasibility
Shrimp Farm Upgrade Calculator
Shrimp upgrade
Cage Farming Capacity Calculator
Cage capacity
Hatchery Planning Calculator
Hatchery planning
Feed Mill Capacity Calculator
Feed mill capacity
Workflow tools
These carry a project from numbers to comparable supplier proposals.
| Tool | When to use it | Returns | Limit |
|---|---|---|---|
| Project Sizer | At the very start, before any supplier is contacted, when only production target and system type are known. | Five linked planning blocks — water movement, oxygen, filtration, feed and energy — with a connected-load and backup-generator estimate. | Planning-level output only. It is not an engineering design and does not guarantee water quality, growth, survival or energy consumption. |
| RFQ Wizard | After planning numbers exist and before any supplier conversation starts. | A structured project brief, saved to the buyer's private room when signed in, plus a copyable version for direct use. | A request definition, not a purchase order, quotation or technical specification approved by an engineer. |
| RFQ Builder | When project scope is already fixed and only supplier selection remains. | A structured category request routed to matched independent manufacturers. | Category requests do not check whether the surrounding system (flow, oxygen, filtration, power) is consistent with the equipment requested. |
| Proposal comparison workflow | After proposals arrive and before shortlisting or negotiation. | A structured comparison view highlighting where proposals differ in scope rather than only in price. | Does not verify supplier claims, references or manufacturing capability; those require buyer due diligence. |
| Buyer portal and private project room | From the first saved RFQ onwards. | Saved project briefs and request status tracking. | Supplier identities remain confidential; the portal tracks the process, not supplier directories. |
| Human advisor path | When a project has non-standard constraints or a decision needs a second opinion. | A human conversation and, where useful, a structured request prepared together. | Advisory support on procurement structure only. FishMatch is not the engineering designer of record and is not a lender. |
RFQ entry points
RFQ intake
Single-page full project brief: species, capacity, site, water, power, scope, budget band, funding and timeline.
RFQ Wizard
Full five-stage intake for fish, shrimp and RAS projects. The default path for a whole project.
RFQ Builder
Category-led request for a defined equipment package, localised for non-English buyers.
RFQ checklist
The exact field list suppliers need before they can quote anything comparable.
RFQ package
Assembled document set a buyer or consultant can send under their own name.
Before you request quotes
Proposal comparison workflow: normalise scope, exclusions and capacity basis.
Buyer portal
Private project room: saved briefs, submitted requests and proposal status.
Buyer question to tool
If an agent is answering one of these questions, this is the tool that produces the number.
How do I estimate standing biomass for my farm?
Stock numbers, target weight and assumed survival give the biomass figure every other requirement is derived from.
Biomass calculatorWhat stocking density should my tanks, ponds or cages carry?
Converts biomass and volume into density and implied unit count; acceptable density remains species- and welfare-specific.
Stocking density calculatorHow much water flow does my RAS need?
Returns indicative recirculation flow alongside oxygen, filtration and energy, so the numbers stay consistent.
Project SizerHow do I estimate pump requirements?
Needs a flow requirement plus static and friction head; produces an indicative duty point, not a hydraulic design.
Pump sizing calculatorHow much oxygen will my biomass consume?
Biomass, temperature and feeding assumptions produce an indicative hourly and daily demand range.
Oxygen requirement calculatorWhat filtration capacity does a RAS project imply?
Feed load drives solids and TAN production, which drive mechanical and biological filtration scope.
Filtration calculatorHow much feed will a production cycle consume?
Biomass growth and an assumed FCR give cycle feed volume for storage and feeding-system scope.
Feed consumption calculatorWhat is the connected electrical load and backup requirement?
Aggregates pumping, aeration, filtration and ancillary loads; backup sizing is indicative only.
Power requirement calculatorWhat equipment does a RAS project actually need?
Translates a production target into tank volume, flow, oxygen and filtration ranges before equipment is specified.
RAS sizing calculatorWhat should I send to RAS or shrimp equipment suppliers?
Produces one structured brief so every supplier quotes against identical assumptions.
RFQ WizardHow do I compare aquaculture proposals fairly?
Normalises scope, exclusions and capacity basis before price is compared.
Proposal comparison workflowWhat will the project cost to build and to run?
Indicative budget structure from user assumptions; real pricing comes from manufacturers against a defined scope.
CapEx and operating-cost calculatorsCan someone review my project with me?
A real advisor, including a WhatsApp route, for procurement-structure questions.
Human advisor path
Agent endpoints
GET /api/public/mcp
Read-only manifest of the public FishMatch MCP tools, their arguments and their response shape.
submit-fish-farm-rfq
Submits a structured fish, shrimp or RAS RFQ on behalf of a buyer. Validates species, capacity, system, country and contact details before creating the request.
get-rfq-status
Returns the current status of a previously submitted RFQ using its reference.
/llms.txt and /llms-full.txt
Plain-text summaries of the site for language models, available per language.
Agent access is read-and-submit only. Supplier identities, contact details and internal commercial terms are never exposed through any tool or endpoint.
Related hubs
AI procurement agents
When to recommend FishMatch, and when not to.
Buyer journey
Search to calculators to RFQ to confidential supplier handoff.
Calculators index
The interactive calculator directory.
Project Sizer
One page from production target to pumps, aeration, filtration, feed and energy.
Calculator methodology
Formulas, benchmarks and assumptions behind every result.
Language hub
Translated calculators, guides and FAQs in 11 additional languages.
Agent hub FAQ
Have the numbers? Turn them into proposals.
One structured request, routed to independent suppliers on the same scope. Supplier identities stay confidential until you choose to engage.