What aquaculture equipment is most in demand in Thailand?

Intensive vannamei equipment leads: paddlewheel and aspirator aerators, blowers and diffuser grids, HDPE pond liners, central-drain and sludge systems, nursery and biofloc packages, automatic and acoustic feeders, and intake and effluent water treatment. Tilapia and catfish operations add cages, pond aeration, feeders and graders, and the export sector drives grading, IQF freezing, ice and chilled-logistics demand.

How much does it cost to build an intensive shrimp farm in Thailand?

As a planning range, USD 45,000–90,000 per productive hectare for a lined intensive farm including earthworks, lining, aeration, pumps, treatment ponds and power — excluding land. Lining runs USD 3.5–7.0 per m² installed and aeration USD 6,000–13,000 per hectare at 20–30 HP/ha. Production cost typically lands at USD 3.3–4.5 per kg with FCR 1.2–1.5, with survival rate the biggest swing factor.

Which port should equipment ship to for a Thai shrimp project?

Laem Chabang for almost everything — it has the best sailing frequency, the widest broker choice and short trucking to the eastern seaboard shrimp belt. Songkhla is worth using for southern projects because it removes 900 km or more of inland haul. Bangkok Port suits smaller consignments, and Suvarnabhumi air cargo is used for probes, controllers and urgent spares where downtime costs more than freight.

What electrical specification does equipment need in Thailand?

Thailand runs 220 V single-phase and 380 V three-phase at 50 Hz. Confirm motors, drives and control panels for 50 Hz in the quotation. Coastal and rural provinces see voltage fluctuation and storm-season outages, so ask suppliers about motor protection, soft starters and generator backup sizing for aeration and life-support duty — losing aeration for a few hours can cost an entire pond.

Do I need Thai GAP or ASC certification, and how does it affect equipment choice?

DOF farm registration is required for commercial operation, and Thai GAP is the practical baseline for export supply chains, with ASC or BAP commonly requested by EU and US retail buyers. Certification shapes equipment choice toward documented water treatment, reservoir and settling capacity (typically 25–40% of site area), and monitoring systems that can export water-quality and chemical-use records for audit rather than paper logs.

Should I buy Thai-made or imported aquaculture equipment?

Both, by category. Thailand's domestic industry is genuinely competitive on paddlewheel aerators, HDPE liners, tanks and feeders, with 3–8 week lead times and local service. Imported equipment usually wins on filtration, oxygenation, instrumentation, nursery packages and processing lines, where efficiency and audit-grade documentation matter. We quote both routes side by side so you compare landed cost and service, not just unit price.

Is a nursery or biofloc stage worth the investment in Thailand?

For most intensive farms, yes. A 20–35 day nursery stage before pond transfer became standard after the EMS/AHPND crisis because it shortens grow-out exposure, improves survival predictability and raises pond turnover per year. A nursery module runs roughly USD 25,000–70,000 depending on size and covers, and the case is strongest for farms that have taken repeat disease losses.

How long do equipment deliveries take in Thailand?

Indicatively: domestic aerators, liners and feeders 3–8 weeks; blowers and nursery packages 6–14 weeks; water treatment and filtration 12–24 weeks; hatchery and live-feed equipment 12–24 weeks; processing, grading and IQF lines 14–30 weeks; monitoring and probes 4–12 weeks. Add roughly one to three weeks for clearance and inland delivery, and confirm whether commissioning and operator training are quoted separately.

Do you sell aquaculture equipment in Thailand?

No. FishMatch Group is an independent sourcing platform. We prepare your specification, run a confidential RFQ to project-matched suppliers serving Thailand — domestic manufacturers and international suppliers alike — and return comparable quotations landed to your province. Buyers pay nothing, and supplier identities stay confidential until you choose to engage.

Who are the aquaculture equipment distributors and dealers serving Thailand?

Distributors and dealers active in Thailand are usually regional agents for international manufacturers of aeration, pumping, feeding, filtration and monitoring equipment. FishMatch Group researches those companies from public information, then approaches the ones whose product range and service coverage match your project. We are not a distributor ourselves and do not sell equipment.

Where can I buy fish farming and shrimp farming equipment for a project in Thailand?

Commercial buyers in Thailand normally buy directly from manufacturers or from their regional distributors rather than from retail outlets. You send one brief describing species, capacity and site conditions; we prepare a technical RFQ and run a confidential round with manufacturers, exporters and distributors that already ship to Asia.

Do you work with aquaculture and fisheries equipment manufacturers and wholesalers?

Yes. Requests are put to manufacturers, wholesalers, exporters and turnkey contractors, selected by capability for your system type rather than by any commercial relationship. Quotes come back in a comparable format with scope, lead time and delivered cost to Thailand stated the same way.

How do I find aquaculture equipment suppliers in Thailand?

Submit one sourcing brief with your species, system and capacity. FishMatch Group matches it against manufacturers, exporters and distributors already serving Thailand and Asia, then returns comparable quotes — you never have to contact suppliers one by one.

How much does aquaculture equipment cost in Thailand?

Cost depends on system type and scale rather than location: small pond or cage setups typically start in the tens of thousands of USD, while commercial RAS and turnkey farms run from several hundred thousand to multi-million USD. Landed cost in Thailand also includes freight, duties, installation and commissioning — all of which are itemised in the quotes you receive.

What is the typical lead time for delivery to Thailand?

Stock items and small equipment usually ship in 2–6 weeks. Engineered RAS, hatchery and processing lines are typically 8–20 weeks from order confirmation, plus 3–6 weeks of sea freight and customs clearance into Thailand.

Do suppliers ship and install equipment in Thailand?

Yes. The manufacturers we work with export regularly to Asia and quote door-to-door where required, covering sea or air freight, customs documentation, on-site installation, commissioning and operator training in Thailand.

How are suppliers serving Thailand verified?

We check company registration, export history into Asia, reference projects of comparable scale, certifications and after-sales capability before a supplier is matched to a Thailand project. Supplier identities stay confidential until you decide to proceed.

Is there a minimum order size for buyers in Thailand?

There is no fixed minimum, but sourcing works best for projects above roughly USD 25,000. Smaller orders are usually matched with regional distributors serving Thailand rather than factory-direct manufacturers.

Can aquaculture projects in Thailand be financed?

Qualified projects in Thailand may be eligible for equipment leasing, export credit, working capital or structured project finance from USD 250,000 upwards through our international financing partners. Financing is reviewed confidentially alongside your equipment quotes.

Are spare parts and after-sales support available in Thailand?

We prioritise suppliers with regional service coverage or a distributor presence in Asia, and spare-parts availability, warranty terms and remote support are compared as part of every quote package for Thailand.

What does it cost to use FishMatch Group in Thailand?

Nothing. Buyers in Thailand pay no fee for sourcing, quote comparison or financing introductions — suppliers cover the fee only when a qualified opportunity is delivered.

How fast will I receive quotes for my Thailand project?

Most complete briefs receive 2–3 matched supplier quotes once suppliers respond. Complex turnkey or RAS projects in Thailand may take 5–10 working days because they require engineered scopes and layout drawings.

Which aquaculture systems can be sourced for Thailand?

RAS and post-smolt systems, sea and lake cages, lined and earthen ponds, biofloc and shrimp systems, hatchery and nursery lines, feed handling, aeration and oxygenation, water treatment, cold chain and processing equipment are all sourced for projects in Thailand and across Asia.

Do I have to contact suppliers in Thailand myself?

No. You submit a single brief and we run the outreach, technical clarification and price negotiation with matched manufacturers on your behalf. Supplier identities stay confidential until you decide which quote to progress for your Thailand project.

Can I get a turnkey EPC quote for a farm in Thailand?

Yes. Turnkey scopes covering process design, civil interface, equipment supply, installation, commissioning and operator training are quoted by EPC partners with delivery experience in Asia, so the Thailand package arrives as one comparable price rather than a dozen separate line items.

What documents do I need before requesting quotes for Thailand?

Species, target annual tonnage, site water source and quality, available land or sea area, power availability and a target start date are enough to begin. Site drawings, permits and water analyses for Thailand sharpen the engineered scope but are not required for the first round of quotes.

Do you support permitting and compliance requirements in Thailand?

We match suppliers whose equipment, certification and documentation meet the standards enforced in Thailand and Asia, and quotes include the technical files, CE or equivalent conformity documents and effluent or biosecurity specifications your permitting process is likely to request.

How do I compare quotes from different suppliers serving Thailand?

Every quote is returned in a comparable format: equipment scope, capacity assumptions, energy and labour requirements, Incoterm and freight to Thailand, installation, warranty, spare parts and payment terms — so you compare total delivered cost of ownership instead of headline equipment price.

← All countries

Aquaculture equipment suppliers in Thailand.

Looking to buy fish farming equipment in Thailand? FishMatch sources RAS, cage, pond, shrimp, hatchery, feeding, aeration, water treatment and complete turnkey equipment from project-matched manufacturers and distributors serving Asia.

Request quote in Thailand Financing options

1 req: Multiple suppliers
0%: Buyer fees
24h: Initial response
Asia: Regional coverage

Short answer

Where do you find aquaculture equipment suppliers in Thailand?

Buyers in Thailand normally source through three routes: direct manufacturers, regional distributors and turnkey EPC contractors. FishMatch Group runs all three in one confidential RFQ — you send a single brief, we approach project-matched suppliers serving Thailand and the wider Asia region, and you receive comparable quotations on identical scope once suppliers respond. Supplier identities stay confidential until you choose to engage, and buyers pay no platform fee.

The service suits commercial and industrial projects — new farms, expansions, hatcheries, processing lines and equipment replacement. It is not a retail catalogue and we do not publish supplier contact details.

Coverage:: Thailand and the wider Asia region
Categories:: RAS, cage, pond, shrimp, hatchery, feed, aeration, water treatment, processing, turnkey
Typical timing:: Response times vary; comparable quotes as suppliers respond
Cost to buyer:: Free — suppliers cover the sourcing fee
Price factors:: Scope, capacity, certification, freight and installation terms
Limitations:: Commercial projects only; indicative budgets are not engineered quotes

Thailand market focus

Aquaculture in Thailand: what buyers are sourcing.

Shrimp processing and feed manufacturing hub.

Top farmed species in Thailand include shrimp, tilapia. FishMatch Group runs a private, anonymized sourcing process for RAS systems, cages, ponds, hatcheries, feed & aeration equipment and full turnkey projects serving Thailand and the wider Southeast Asia region.

shrimptilapia

Thailand is Southeast Asia's most technically mature shrimp-farming market: intensive and super-intensive vannamei in lined ponds along the Gulf and Andaman coasts, a large biofloc and nursery segment built after the EMS/AHPND crisis, and an export processing base that sets the specification standard for the whole supply chain. Buyers reaching us here are usually upgrading existing farms — heavier aeration, central drainage, water treatment and reservoir capacity — or building nursery, hatchery and cold-chain capacity to meet EU, Japanese and US audit requirements. A strong domestic manufacturing base means imported equipment has to win on efficiency, documentation and service, not price alone.

Species focus and the systems buyers specify

Species	Systems	Sourcing notes
Whiteleg shrimp (vannamei) — intensive grow-out	HDPE-lined ponds, paddlewheel and aspirator aeration, central drain, reservoir and treatment ponds	Typical intensive stocking of 80–200 PL/m² needs roughly 20–30 HP/ha of aeration plus oxygen backup; central-drain sludge removal and a dedicated reservoir are now standard on audited export farms.
Shrimp nursery & biofloc	Lined nursery raceways, greenhouse covers, blowers and diffuser grids, biofloc control	A 20–35 day nursery stage before pond transfer is the standard Thai answer to disease risk; equipment demand centres on fine-bubble aeration, heating/cover systems and water-quality instrumentation.
Black tiger shrimp (monodon)	Lower-density lined or earthen ponds	Returning in premium niches with domesticated broodstock; same equipment family as vannamei at lower aeration load but tighter biosecurity on seed handling.
Tilapia & hybrid catfish	Cages in reservoirs and rivers, pond systems, small RAS	Central and north-eastern provinces farm tilapia in river cages and ponds for the domestic market; demand is for cages, pond aeration, feeders, graders and ice.
Marine finfish (seabass/barramundi, grouper)	Coastal cages, nursery tanks, marine hatchery	Asian seabass is farmed in coastal cages and ponds with a growing marine hatchery segment supplying regional buyers.
Processing & cold chain	Grading, IQF freezing, ice, chilled logistics	Thailand's export processing sector drives continuous demand for grading, peeling, freezing and traceability equipment specified to EU/US buyer audits.

What is driving equipment demand

Export audits from EU, Japanese, US and Korean buyers push farms toward documented water treatment, traceability and welfare-compliant handling equipment.
Post-EMS disease strategy keeps nursery, biofloc and biosecurity investment at the centre of most upgrade budgets.
High and volatile electricity cost makes aeration efficiency (kg O₂ per kWh) a decisive comparison metric, not a footnote.
Labour scarcity and cost drive automation: acoustic and automatic feeders, automated grading, monitoring and remote control.
Department of Fisheries GAP and Thai GAP certification requirements shape effluent treatment and record-keeping equipment specification.
A dense domestic manufacturing base (aerators, liners, feeders, tanks) means import decisions concentrate on filtration, oxygenation, instrumentation and processing lines.

Regulatory requirements

What salmon farming equipment must satisfy in Norway

Department of Fisheries (DOF) farm registration and movement documents — required before commercial operation and for export-chain traceability.
Thai GAP / DOF GAP certification — the baseline standard for export supply chains; sets effluent treatment, chemical-use recording and water-quality logging requirements.
ASC and BAP certification — commonly requested by EU and US retail buyers, adding documented welfare, feed-traceability and monitoring expectations.
Effluent discharge standards under the Pollution Control Department — reservoir, settling and treatment pond capacity must be designed in, not added later.
Antibiotic and residue control for export shrimp — drives demand for documented water treatment and dosing equipment rather than ad-hoc chemical use.
ASEAN Form D preferential duty — equipment of ASEAN origin can qualify; non-ASEAN suppliers should check applicable FTA coverage and HS classification before ordering.
Board of Investment (BOI) incentives — qualifying agriculture and food-processing projects may access duty exemptions on imported machinery; confirm eligibility before finalising the purchase route.

Cost benchmarks

Intensive vannamei pond cost benchmarks in Thailand

Indicative planning benchmarks for lined intensive vannamei farms in Thailand (80–200 PL/m², two-phase nursery plus grow-out, with reservoir and treatment ponds). Use them to sanity-check a budget before quotations arrive — they are planning ranges, not a quotation.

Cost item	Indicative benchmark	What drives it
Total farm CAPEX (lined intensive, with treatment ponds)	USD 45,000–90,000 per productive hectare	Earthworks, lining, aeration, pumps, treatment ponds, power and site works. Excludes land. Below USD 40,000/ha usually means treatment or backup power has been cut from scope.
Pond lining supplied and installed	USD 3.5–7.0 per m²	Depends on HDPE thickness (0.5–1.0 mm), site preparation and welding scope; installation crew availability drives schedule more than material supply.
Aeration installed (intensive duty)	USD 6,000–13,000 per hectare at 20–30 HP/ha	Paddlewheel plus blower/diffuser mix. Compare on kg O₂ per kWh, not HP — the efficiency gap between units repays itself within one to two cycles at Thai power prices.
Nursery / biofloc stage	USD 25,000–70,000 per nursery module	Lined raceway, cover, blowers, heating and instrumentation for a 20–35 day stage feeding several grow-out ponds.
Electricity consumption	1.2–2.2 kWh per kg shrimp produced	Aeration dominates. Efficient units, right-sized blowers and staged aeration control are the biggest levers on OPEX.
Feed cost share	50–60% of production cost, FCR 1.2–1.5	Feeder type and feeding discipline move FCR more than feed brand at intensive densities.
Total production cost	USD 3.3–4.5 per kg (harvest size 40–70 pcs/kg)	Feed, seed, energy, labour, chemicals and maintenance, excluding capital cost and financing. Survival rate is the single biggest swing factor.
Water and treatment area	25–40% of site area as reservoir/treatment	Required for GAP and export-audit compliance; plan it into the land budget from the first layout.
Long-lead imported items	12–24 weeks	Filtration, oxygenation, instrumentation and processing equipment; domestic aerators, liners and feeders typically ship in 3–8 weeks.

Benchmarks are indicative planning ranges for budgeting only and move with site conditions, power tariffs, exchange rates and shrimp prices. FishMatch Group is supplier-neutral and does not guarantee pricing — request matched quotations to confirm.

Startup sequence

How to start a fish or shrimp farm in Thailand

1. Site, water source and salinity check
Confirm year-round salinity and water availability — Gulf coast provinces (Chanthaburi, Rayong, Trat) and southern Andaman sites behave very differently from inland low-salinity areas, and salinity sets both species and pumping design.
2. Registration and GAP pathway
Register the farm with the Department of Fisheries (DOF) and decide early whether you are targeting Thai GAP, ASC or BAP — the standard chosen dictates effluent treatment, reservoir area and record-keeping equipment before layout is fixed.
3. Fix the production model
Intensive lined pond, nursery-plus-grow-out two-phase, or biofloc-intensive. This single decision determines aeration HP/ha, blower capacity, liner area and treatment-pond footprint before any supplier is contacted.
4. Reserve water-treatment and reservoir area
Audited Thai farms typically allocate 25–40% of total site area to reservoir, settling and treatment ponds. Retrofitting this after construction is the most expensive mistake first-time builders make here.
5. Power assessment
Confirm three-phase supply capacity with the provincial electricity authority and size generator backup for aeration and life-support duty — provincial outages during storm season are common on coastal sites.
6. Single-package RFQ and commissioning
Combine liners, aeration, blowers, pumps, feeders, water treatment and monitoring into one brief; compare landed cost through Laem Chabang against domestic manufacture, and price commissioning and operator training explicitly.

Regulatory requirements change — confirm current scope with the relevant authorities or a local agent before fixing your schedule.

Ports & logistics

Getting equipment into Thailand

Most imported equipment enters through Laem Chabang, Thailand's deep-water container gateway, and moves by truck to farm provinces on good highway infrastructure — inland transport in Thailand is faster and cheaper than in most regional markets. Southern shrimp and processing clusters can clear through Songkhla to avoid the long haul from the eastern seaboard. Because aerators, liners, tanks and feeders are widely manufactured domestically, import logistics matter most for filtration, oxygenation, instrumentation, hatchery and processing equipment.

Laem Chabang

Main deep-water gateway

Best sailing frequency, widest broker choice and the usual entry point for project cargo and processing lines; short haul to the eastern seaboard shrimp belt.

Bangkok Port (Khlong Toei)

River port for smaller consignments

Vessel size and draft limits apply; useful for LCL and smaller equipment shipments destined for central provinces.

Songkhla

Southern gateway

Serves the southern shrimp and processing cluster directly and can remove 900+ km of trucking versus clearing in the east.

Phuket / Ranong

Andaman coast access

Smaller volumes; suited to west-coast cage, hatchery and marine finfish projects.

Suvarnabhumi air cargo

Urgent spares and instrumentation

Used for probes, controllers, pumps and spare parts where a stopped aeration or life-support system makes air freight cheaper than downtime.

Regional clusters

Where Norwegian aquaculture equipment is needed

Eastern seaboard (Chanthaburi, Rayong, Trat)

Core intensive shrimp belt

High-density lined vannamei ponds close to Laem Chabang; the most equipment-intensive region and the first adopter of nursery and central-drain designs.

Upper Gulf (Samut Sakhon, Samut Songkhram, Phetchaburi)

Shrimp farming plus processing

Dense processing and cold-chain infrastructure alongside farms; strong demand for grading, chilling, ice and effluent-treatment equipment.

Southern provinces (Surat Thani, Nakhon Si Thammarat, Songkhla)

Shrimp and hatchery cluster

Major hatchery and broodstock capacity supplying the country and regional export markets; specialised larval-rearing and live-feed equipment demand.

Andaman coast (Phang Nga, Krabi, Trang)

Shrimp and marine finfish

Smaller-scale farms and seabass/grouper cages; equipment must handle higher salinity and more exposed coastal conditions.

Central & north-east (Chai Nat, Nakhon Sawan, Khon Kaen)

Freshwater tilapia and catfish

River and reservoir cages plus pond farms serving the domestic market; demand for cages, pond aeration, feeders and ice.

Verified categories

Equipment categories we vet suppliers for in Thailand

These are the categories where Thai buyers most often ask us to run a confidential RFQ, and what we check before a supplier is put in front of you. Supplier identities stay confidential until you decide to engage.

Pond aeration (paddlewheel, aspirator, diffused)

20–30 HP/ha intensive duty, fine-bubble grids for nursery, blowers and diffuser layout

How we vet: Measured oxygen transfer (kg O₂/kWh) at Thai water temperature and salinity, motor IP rating, corrosion package and provincial service coverage.

Pond aeration (paddlewheel, aspirator, diffused) suppliers

HDPE liners, covers and greenhouse nursery structures

Pond lining, nursery raceway lining, covers for temperature and biosecurity control

How we vet: Resin grade, thickness, UV stabilisation for tropical exposure, welding method and warranty, plus installation crew availability in the farm province.

HDPE liners, covers and greenhouse nursery structures suppliers

Water treatment, reservoir and effluent systems

Intake filtration, disinfection, settling and treatment ponds, sludge handling, discharge compliance

How we vet: Sizing against DOF/GAP effluent expectations, sludge-handling capacity at intensive stocking and documented performance at the design flow.

Water treatment, reservoir and effluent systems suppliers

Nursery and biofloc systems

Raceways, fine-bubble aeration, heating, biofloc monitoring and control

How we vet: Proven 20–35 day nursery performance references, oxygen and mixing design at high floc density, and instrumentation that survives brackish conditions.

Nursery and biofloc systems suppliers

Feeders and feed management

Automatic and acoustic (demand) feeders, feed storage and blowing systems

How we vet: Documented FCR improvement references in intensive Thai ponds, corrosion resistance, control integration and local spare-part availability.

Feeders and feed management suppliers

Pumps, generators and power backup

Intake and transfer pumps, standby generation for aeration and life support

How we vet: 220 V/380 V 50 Hz confirmation, duty-point efficiency, storm-season backup autonomy and provincial service response.

Pumps, generators and power backup suppliers

Monitoring and farm control

DO, pH, temperature, salinity and ORP probes, telemetry, alarms and remote control

How we vet: Calibration interval, drift in brackish water, alarm reliability and whether data export supports GAP/ASC record-keeping.

Monitoring and farm control suppliers

Hatchery and live-feed equipment

Larval tanks, artemia and algae culture, UV/ozone, broodstock maturation systems

How we vet: Biosecurity design, SPF-compatible layout references, and delivery aligned to the hatchery's breeding cycle.

Hatchery and live-feed equipment suppliers

Processing, grading and cold chain

Graders, peeling, IQF freezing, ice plants, chilled transport

How we vet: EU/US buyer-audit compliance, food-contact material certification, throughput verification and installed references in Thai plants.

Processing, grading and cold chain suppliers

Lead times

Indicative delivery lead times

Paddlewheel aerators, liners and feeders (domestic manufacture)3–8 weeks: Thailand's domestic manufacturing base is deep; local sourcing is usually faster than import for standard pond equipment.
Blowers, diffuser grids and nursery packages6–14 weeks: Often part-imported; confirm 380 V / 50 Hz motor specification and tropical-duty rating in the order.
Water treatment and filtration systems12–24 weeks: Engineered to the site's flow and effluent target; release before civil works are finalised.
Hatchery and live-feed equipment12–24 weeks: Align delivery with the breeding cycle — missing the seasonal window costs a full production run.
Processing, grading and IQF lines14–30 weeks: Food-contact certification and buyer-audit documentation must be quoted with the equipment, not after.
Monitoring, probes and controllers4–12 weeks: Short lead times, but calibration and integration should be scheduled with commissioning.

Planning benchmarks only — confirm against supplier quotations for your scope.

Documentation & compliance

What buyers in Thailand must document

DOF farm registration and movement documents: Required for commercial operation and export-chain traceability; equipment records feed into the same documentation chain.
Thai GAP / ASC / BAP evidence: Water-quality logging, effluent treatment and chemical-use records — specify data export from monitoring equipment so audits are not a manual exercise.
Import documentation: Commercial invoice, packing list, bill of lading and certificate of origin; Form D for ASEAN-origin goods. Confirm HS classification before ordering.
Electrical specification: 220 V single-phase / 380 V three-phase at 50 Hz confirmed in writing for motors, drives and control panels, with motor protection for fluctuating provincial supply.
Food-contact and hygiene certification: Processing and cold-chain equipment needs material certification acceptable to EU/US buyer audits.
Service, spares and language: Ask for a named Thailand-based service partner, guaranteed response time, a spares list and Thai-language operator documentation in the quotation.

Landed-cost drivers

What moves the delivered cost in Thailand

Aeration efficiency, not purchase price, is the dominant lifetime cost on an intensive Thai shrimp farm.
Domestic manufacture is highly competitive on liners, aerators and feeders; imports win on filtration, instrumentation and processing.
Treatment and reservoir ponds are a compliance requirement — budget the land and earthworks with the equipment.
Generator backup for aeration is insurance against total stock loss during storm-season outages, not an optional extra.
BOI incentives can change the landed-cost calculation on imported machinery; confirm eligibility before choosing the purchase route.

Aeration systems Shrimp farming equipment Paddlewheel aerators — sizing guide Vannamei shrimp hatchery sourcing Shrimp farm cost guide Stocking density calculator Vietnam equipment sourcing

Cost the project first

Planning calculators for a project in Thailand

Free planning-grade tools, calculated in your browser. Use them to size and cost the system before requesting quotations — then send the result into a structured RFQ so suppliers quote the same scope.

Shrimp farm setup cost

Pond or indoor shrimp CAPEX, stocking and production estimate.

Fish farm ROI

Revenue, operating cost and payback for a commercial farm.

RAS system cost & sizing

Flow, biofilter area, oxygen demand and system cost band.

Pond vs RAS comparison

Capital and lifetime running cost compared side by side.

Feed cost

Feed volume, FCR and annual feed budget for your cycle.

RFQ budget planner

Build a CAPEX budget you can put straight into an RFQ.

Request a confidential RFQ Project financing readiness All aquaculture calculators

Sourcing equipment in Thailand — how it works.

01
Local + global match
Suppliers serving Thailand and regional manufacturers shortlisted.
02
Qualification
Scope, warranty and after-sales terms reviewed on available information; project references requested. Qualification is not certification or a performance guarantee.
03
Logistics
Shipping into Thailand, customs and duties handled by the supplier or logistics partner where included in the quote; import clearance remains the buyer's responsibility.
04
Installation
Installation, commissioning, operator training and after-sales support are performed by the supplier or its EPC partner where included in the quote.

Equipment we source in Thailand

Financing in Thailand

Need financing for your project in Thailand?

Qualified projects in Thailand may be introduced to independent third-party equipment, turnkey or expansion financing providers. Approval and terms are set solely by the provider.

Check financing

1. What equipment do you need? *

2. Type of farm *

3. Project type *

4. Farm size / capacity

5. Budget range

6. Timeline

Smart questions

Fish farm project details

Lets suppliers scope tanks, cages, aeration, feeders and water treatment for your species and site.

Target species *

Farm type *

Target annual production *

Water source

Grid & road access

Documents that help us quote faster

Optional — you can email them after or bring them to the first call. Uploads are private and encrypted.

Site photos or coordinates
Water analysis (DO, pH, temperature, ammonia)
Existing licenses / aquaculture permits
Business plan or feasibility summary (if available)

7. Location *

8. Anything specific? (optional)

Aquaculture project details (optional)

Tell suppliers what they need to quote accurately

The more complete your aquaculture project details are, the faster suitable partners can understand your request and respond with realistic options. Leave anything you do not know yet blank — nothing here is required.

SpeciesSystem typeProject location (region / city)Production targetWater sourceLand or water area availableCurrent project stageStocking density (if known)Feed and feeding system needsAeration / oxygen needsPumps and water flow needsMonitoring / IoT / automationFiltration and water treatmentSuppliers already contacted (if any)Interested in an introduction to financing partners?UrgencySite statusPower supply at sitePermits and licencesEffluent / discharge requirementsWhat you want quotedPreferred delivery termsAfter-sales expectationsCertification or standards requiredYour role in the decisionBudget statusTarget market for the harvest

9. Describe your project (optional)

Not sure what to write? Answer a few quick questions and we'll draft the brief for you.

10. Your contact details *

Confidential matching · Supplier-paid model · No obligation · Human-assisted sourcing

FAQ — Aquaculture equipment in Thailand

Go deeper on sourcing in Thailand

Category-specific pages for this market — each one returns matched quotes from qualified suppliers without revealing supplier identities.

Shrimp Farm Systems RFQ — Thailand

Send one brief, compare matched quotes.

Hatchery Equipment RFQ — Thailand

Send one brief, compare matched quotes.

Seafood Export RFQ — Thailand

Send one brief, compare matched quotes.

Shrimp harvest vacuums & pumps — Thailand

Sizing, packing and documentation for harvest transfer.

Vannamei Shrimp (Whiteleg) hatchery sourcing — Thailand

Post-larvae PL10–PL15, SPF/SPR nauplii

Barramundi (Asian Sea Bass) hatchery sourcing — Thailand

Fingerlings 3–10g, vaccinated juveniles

Grouper hatchery sourcing — Thailand

Fingerlings 3–10g, hybrid grouper (TGGG)

Global supplier sourcing

How the matching process works across all markets.

Other countries in Asia

India Vietnam Indonesia China Japan Philippines South Korea

Continue in Thailand

Equipment, RFQs and planning tools for Thailand

Equipment & services in Thailand

Request quotes

Plan before you buy

Related sourcing hubs

Aquaculture equipment sourcing beyond Thailand

By equipment category

Other supplier countries

Financing for your project

Explore aquaculture and RAS suppliers here for research and market discovery, or start with your project requirements so FishMatch can help structure the RFQ and identify relevant system providers for that specific production plan.

Directory — research

Browse categories, countries and technology types to understand the market and which system types exist. Nothing is requested and no supplier is contacted.

Project sourcing — RFQ

Define species, system, production target and site conditions, size the requirement with the planning tools, and build one structured RFQ. Manufacturer research follows the requirement.

Submit Aquaculture Project Request Size the requirement first →How proposals are compared →

FishMatch helps prepare aquaculture RFQs and source relevant suppliers.
Supplier directory pages are for discovery and SEO, not automatic matching.
Buyer follow-up and supplier selection are handled by David / FishMatch.

There is no instant or automated supplier match. Manufacturer research happens after the project requirement is clear and is reviewed by the FishMatch team before any supplier is approached.

Manufacturers can register in the free directory and keep their company details up to date. Being listed is a research and visibility surface — it does not create an automatic connection to buyers, and it does not replace the human sourcing process.

Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by David / FishMatch Group, and supplier introductions are made only after internal approval.

More on Thailand

Each page answers a different stage of the same project — market, suppliers, feasibility and equipment.

Thailand aquaculture market

Market overview — demand, species, regulation and route to market

Open

Thailand equipment sourcing

Category-qualified equipment sourcing for one country

Open

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Supplier selection criteria

How should a buyer compare aquaculture suppliers?

Compare on evidence, not on presentation: delivered projects at a similar scale and climate, engineering support during design, lead time commitments, spare-part and service availability in your region, certification and testing documentation, payment and warranty terms, and willingness to quote against your specification rather than substituting a catalogue package.

What are the warning signs in a supplier quotation?

Treat these as review triggers: no itemised scope, guaranteed biological or financial performance, no named delivery terms or lead time, no spare-parts or service statement, unclear responsibility for installation and commissioning, and equipment sizing that does not reference your water temperature, oxygen demand or biomass targets.

How does FishMatch handle supplier selection?

FishMatch is an independent sourcing layer, not a manufacturer or reseller. Requirements are structured into a single technical RFQ and routed to relevant producers; buyers receive comparable offers without supplier identities being exposed before they choose to proceed. Selection stays with the buyer — FishMatch standardises the comparison basis.

Start a structured RFQ

Aquaculture equipment suppliers in Thailand.

Where do you find aquaculture equipment suppliers in Thailand?

Aquaculture in Thailand: what buyers are sourcing.

Species focus and the systems buyers specify

What is driving equipment demand

What salmon farming equipment must satisfy in Norway

Intensive vannamei pond cost benchmarks in Thailand

How to start a fish or shrimp farm in Thailand

1. Site, water source and salinity check

2. Registration and GAP pathway

3. Fix the production model

4. Reserve water-treatment and reservoir area

5. Power assessment

6. Single-package RFQ and commissioning

Getting equipment into Thailand

Laem Chabang

Bangkok Port (Khlong Toei)

Songkhla

Phuket / Ranong

Suvarnabhumi air cargo

Where Norwegian aquaculture equipment is needed

Eastern seaboard (Chanthaburi, Rayong, Trat)

Upper Gulf (Samut Sakhon, Samut Songkhram, Phetchaburi)

Southern provinces (Surat Thani, Nakhon Si Thammarat, Songkhla)

Andaman coast (Phang Nga, Krabi, Trang)

Central & north-east (Chai Nat, Nakhon Sawan, Khon Kaen)

Equipment categories we vet suppliers for in Thailand

Pond aeration (paddlewheel, aspirator, diffused)

HDPE liners, covers and greenhouse nursery structures

Water treatment, reservoir and effluent systems

Nursery and biofloc systems

Feeders and feed management

Pumps, generators and power backup

Monitoring and farm control

Hatchery and live-feed equipment

Processing, grading and cold chain

Indicative delivery lead times

What buyers in Thailand must document

What moves the delivered cost in Thailand

Planning calculators for a project in Thailand

Sourcing equipment in Thailand — how it works.

Local + global match

Qualification

Logistics

Installation

Equipment we source in Thailand

Need financing for your project in Thailand?

Fish farm project details

Tell suppliers what they need to quote accurately

FAQ — Aquaculture equipment in Thailand

What aquaculture equipment is most in demand in Thailand?

How much does it cost to build an intensive shrimp farm in Thailand?

Which port should equipment ship to for a Thai shrimp project?

What electrical specification does equipment need in Thailand?

Do I need Thai GAP or ASC certification, and how does it affect equipment choice?

Should I buy Thai-made or imported aquaculture equipment?

Is a nursery or biofloc stage worth the investment in Thailand?

How long do equipment deliveries take in Thailand?

Do you sell aquaculture equipment in Thailand?

Who are the aquaculture equipment distributors and dealers serving Thailand?

Where can I buy fish farming and shrimp farming equipment for a project in Thailand?

Do you work with aquaculture and fisheries equipment manufacturers and wholesalers?

How do I find aquaculture equipment suppliers in Thailand?

How much does aquaculture equipment cost in Thailand?

What is the typical lead time for delivery to Thailand?

Do suppliers ship and install equipment in Thailand?

How are suppliers serving Thailand verified?

Is there a minimum order size for buyers in Thailand?

Can aquaculture projects in Thailand be financed?

Are spare parts and after-sales support available in Thailand?

What does it cost to use FishMatch Group in Thailand?

How fast will I receive quotes for my Thailand project?

Which aquaculture systems can be sourced for Thailand?

Do I have to contact suppliers in Thailand myself?

Can I get a turnkey EPC quote for a farm in Thailand?

What documents do I need before requesting quotes for Thailand?

Do you support permitting and compliance requirements in Thailand?

How do I compare quotes from different suppliers serving Thailand?

Go deeper on sourcing in Thailand

Other countries in Asia