Looking to find local distributors of aquaculture and fish farming equipment in Egypt? FishMatch helps you compare distributors, agents and manufacturers serving Africa / Middle East for RAS, cage, pond, shrimp, hatchery, feeding, aeration and water-treatment scope — one structured, human-reviewed RFQ.
Short answer
Buyers in Egypt normally source through three routes: direct manufacturers, regional distributors and turnkey EPC contractors. FishMatch Group runs all three in one confidential RFQ — you send a single brief, we approach project-matched suppliers serving Egypt and the wider Africa / Middle East region, and you receive comparable quotations on identical scope once suppliers respond. Supplier identities stay confidential until you choose to engage, and buyers pay no platform fee.
The service suits commercial and industrial projects — new farms, expansions, hatcheries, processing lines and equipment replacement. It is not a retail catalogue and we do not publish supplier contact details.
Africa's largest tilapia producer.
Top farmed species in Egypt include tilapia, mullet. FishMatch Group runs a private, anonymized sourcing process for RAS systems, cages, ponds, hatcheries, feed & aeration equipment and full turnkey projects serving Egypt and the wider North Africa region.
Free planning-grade tools, calculated in your browser. Use them to size and cost the system before requesting quotations — then send the result into a structured RFQ so suppliers quote the same scope.
Pond or indoor shrimp CAPEX, stocking and production estimate.
Revenue, operating cost and payback for a commercial farm.
Flow, biofilter area, oxygen demand and system cost band.
Capital and lifetime running cost compared side by side.
Feed volume, FCR and annual feed budget for your cycle.
Build a CAPEX budget you can put straight into an RFQ.
Real requests the FishMatch desk has worked on with buyers in Egypt — anonymized to protect buyer and supplier confidentiality. Each one started as a rough idea and became a structured RFQ that project-matched suppliers could price on identical scope.
Kafr El-Sheikh
≈1,000 t/year, 40 ha pond block
Paddlewheel and aspirator aeration sized for Nile Delta summer temperatures, water-exchange pumping, pond-elevation water management and harvest handling equipment.
How the desk handled it: The desk converted the buyer's 'increase production per feddan' goal into a fixed stocking and aeration model, so suppliers priced oxygen-transfer capacity instead of generic aerator counts.
Nile Valley fringe
≈25 M fingerlings/year
Recirculating nursery with drum filtration, biofiltration, UV, groundwater treatment (iron removal) and cooling duty sized for high ambient temperatures.
How the desk handled it: Groundwater chemistry and summer cooling load were measured into the brief before sourcing — the two variables that most often sink Delta-fringe RAS budgets when discovered after purchase.
Behera
≈6,000 t/year feed throughput
Feed silos and handling, cold rooms and ice capacity for harvest logistics, with 220/380 V 50 Hz electrical specification and Arabic/English documentation.
How the desk handled it: The desk ran feed-side and cold-chain equipment as one consolidated RFQ so the cooperative could compare total project cost against phased procurement before committing.
Figures are indicative planning benchmarks, not engineered quotations. Supplier identities were never disclosed before the buyer chose to engage.
Send one structured brief: species, target tonnage, system type (RAS, ponds, cages, hatchery), country, site conditions, budget range and timeline. It takes a few minutes and is free.
David and the sourcing desk review the request personally. If the need, scale, budget or technical direction is not yet clear, we work with you to sharpen it before any supplier sees it.
Only once the brief is clear do we search our vetted supplier and manufacturer network for companies whose equipment, track record and service coverage actually fit the project.
You receive comparable quotations and guidance on the trade-offs. David introduces relevant suppliers directly only when you decide to engage — there is no automatic matching and no open marketplace.
FishMatch Group is not a manufacturer, farm operator, lender or engineering contractor, and does not guarantee any supplier. Supplier identities stay confidential until you choose to engage. The supplier directory on this page is for research and discovery — buyer follow-up and supplier selection are handled personally by David and the FishMatch team.
Qualified projects in Egypt may be introduced to independent third-party equipment, turnkey or expansion financing providers. Approval and terms are set solely by the provider.
Check financingCategory-specific pages for this market — each one returns matched quotes from qualified suppliers without revealing supplier identities.
Explore aquaculture and RAS suppliers here for research and market discovery, or start with your project requirements so FishMatch can help structure the RFQ and identify relevant system providers for that specific production plan.
Browse categories, countries and technology types to understand the market and which system types exist. Nothing is requested and no supplier is contacted.
Define species, system, production target and site conditions, size the requirement with the planning tools, and build one structured RFQ. Manufacturer research follows the requirement.
There is no instant or automated supplier match. Manufacturer research happens after the project requirement is clear and is reviewed by the FishMatch team before any supplier is approached.
Manufacturers can register in the free directory and keep their company details up to date. Being listed is a research and visibility surface — it does not create an automatic connection to buyers, and it does not replace the human sourcing process.
Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by David / FishMatch Group, and supplier introductions are made only after internal approval.
Each page answers a different stage of the same project — market, suppliers, feasibility and equipment.
Before you request quotes
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.
Compare on evidence, not on presentation: delivered projects at a similar scale and climate, engineering support during design, lead time commitments, spare-part and service availability in your region, certification and testing documentation, payment and warranty terms, and willingness to quote against your specification rather than substituting a catalogue package.
Treat these as review triggers: no itemised scope, guaranteed biological or financial performance, no named delivery terms or lead time, no spare-parts or service statement, unclear responsibility for installation and commissioning, and equipment sizing that does not reference your water temperature, oxygen demand or biomass targets.
FishMatch is an independent sourcing layer, not a manufacturer or reseller. Requirements are structured into a single technical RFQ and routed to relevant producers; buyers receive comparable offers without supplier identities being exposed before they choose to proceed. Selection stays with the buyer — FishMatch standardises the comparison basis.