Water Treatment
Drum filters, biofilters, UV, ozone, denitrification and effluent treatment.
Water and effluent treatment delivered as an engineered project — design basis, permitting, installation and performance verification.
Project-matched water-treatment specialists
Private & anonymized
Zero
What we source
Engineered water treatment for RAS, hatcheries and processing plants — intake, recirculation and effluent.
- Drum & disc filters
- Moving-bed biofilters (MBBR)
- UV & ozone disinfection
- Denitrification reactors
- Effluent & sludge treatment
We develop complete commercial projects — not just equipment packages
Water treatment is rarely a component purchase; it is a permitting and process-engineering problem. We structure and source the full scope: influent and effluent characterisation, treatment process selection and sizing, discharge-permit alignment, budget and financing preparation, tendering, installation supervision and performance testing — all executed and warranted by the selected independent provider.
- Phase 1
Feasibility & site assessment
Influent/effluent characterisation, discharge limits and regulatory review.
- Phase 2
Concept & engineering design
Process selection and sizing — filtration, biofiltration, disinfection, denitrification, sludge.
- Phase 3
CAPEX / OPEX modelling & financing
CAPEX and energy/chemical OPEX modelling for the full treatment train.
- Phase 4
Tendering & supplier selection
Vendor-agnostic tendering and technical scoring of competing treatment trains.
- Phase 5
Construction & installation
Installation, integration into the production loop and instrumentation set-up.
- Phase 6
Commissioning, training & operations
Performance testing against permit limits, SOPs and operator training.
What you receive
- Water and effluent design basis
- Permit-aligned treatment process specification
- Energy and consumables OPEX model
- Vendor-neutral tender and scoring matrix
- Commissioning and compliance verification plan
Private by design.
You'll never see supplier names. We run a sealed-bid process and present anonymized proposals — you choose the winner, we handle the introduction and the contract.
Markets we source water treatment for
Sourcing runs the same way in every market: one structured specification, matched suppliers with real export experience for that destination, and anonymized bids priced on the same scope. Country pages below carry the local logistics, certification and installation detail.
Water treatment — sizing & sourcing FAQ
How to specify mechanical, biological, UV and oxygen systems for aquaculture without over-engineering the plant.
Ready to price it?
Start a private, anonymized RFQ.
1–3 shortlisted proposals. Zero buyer fees. Suppliers stay confidential until you choose.
Related categories
equipment
Aquaculture Equipment
Tanks, pumps, sensors, sorters, harvesters — every category, anonymized sourcing.
equipment
Processing Equipment
Stunning, gutting, filleting, smoking, IQF and packaging lines.
equipment
Aeration & Oxygenation
Paddlewheels, diffusers, LOX, oxygen cones and emergency systems.
equipment
Mechanical Filtration
Drum filters, disc filters and micro-screens for solids removal in RAS and flow-through.
Short answer
How do you source Water Treatment for a commercial aquaculture project?
Start from the process requirement — biomass, flow, water quality target and site constraints — not from a product catalogue. FishMatch Group converts that requirement into a specification for Water Treatment, sources it from vetted manufacturers and integrators across Europe, Asia and the Americas, and returns like-for-like quotations with lead times, energy consumption and lifetime running cost stated in the same format.
- What we compare:
- Scope, capacity, energy use, lead time and total cost of ownership
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Delivery terms:
- Quotations normalised to EXW / FOB / CIF so prices are like-for-like
- Cost to buyers:
- No fee charged to the buyer
How do you source Water Treatment for a commercial aquaculture project?
Start from the process requirement — biomass, flow, water quality target and site constraints — not from a product catalogue. FishMatch Group converts that requirement into a specification for Water Treatment, sources it from vetted manufacturers and integrators across Europe, Asia and the Americas, and returns like-for-like quotations with lead times, energy consumption and lifetime running cost stated in the same format.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.
Before you request quotes
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.