Aquaculture consultant directory — by specialisation
Eight disciplines that commercial fish and shrimp projects actually hire for, what each one owns on a project, and what to have ready before the first call.
How do you choose the right aquaculture consultant for a project?
Match the discipline to the decision. Sizing a recirculating system is RAS engineering; pond intensification is shrimp or grow-out advisory; a lender pack is feasibility and financing readiness. Most commercial projects use two or three disciplines in sequence, not one generalist.
Disciplines listed:
8 core aquaculture advisory fields
Names published:
None — the network is confidential
Certification:
FishMatch Group does not certify or rank consultants
Project focus:
Commercial projects from roughly USD $250K
FishMatch Group does not publish the names, websites or contact details of the consultants and suppliers in its network, and does not certify, license or rank consultants. This directory describes the disciplines a commercial fish or shrimp project normally needs and what to prepare before engaging one. Sourcing support is arranged through a human review, not an automatic match.
Also searched as: RAS consultant · recirculating aquaculture system engineer · RAS design consultant
Sizing and specifying a recirculating system: biofilter load, oxygen delivery, degassing, solids removal, flow and turnover, and the equipment scope that follows from it.
Scope this discipline owns
Design basis: feed load, TAN production, temperature band, make-up water
Tank, flow, biofilter and oxygen sizing before any supplier is priced
Equipment specification and battery limits between packages
Pond and lined-pond vannamei production, intensification, aeration strategy, biofloc or clear-water operation and the equipment budget that supports the stocking plan.
Scope this discipline owns
Stocking density, aeration demand and water exchange plan
Liner, aerator, pump and monitoring scope
Harvest and post-harvest handling flow
Survival and FCR assumptions written down as assumptions
Also searched as: shrimp hatchery consultant · fish hatchery consultant · larval rearing specialist
Fish and shrimp hatchery planning: broodstock, maturation, larval tanks, live feed, water treatment and the biosecurity regime the equipment has to support.
Scope this discipline owns
Tank plan against target fry or post-larvae output
Live feed, water treatment and heating scope
Biosecurity zoning and disinfection requirements
Lot-by-lot RFQ split so specialists quote their own scope
The discipline you need is usually the same everywhere; the constraints are not. These are the project patterns we see most often by region.
Latin America
Shrimp pond intensification, tilapia grow-out, hatchery and processing projects.
Europe
RAS grow-out, land-based salmon and trout, water reuse and permitting-heavy sites.
Middle East & North Africa
Desert RAS, seawater intake, shrimp and seabass projects with water-cost constraints.
Sub-Saharan Africa
Pond and cage tilapia, catfish, feed supply and cold-chain gaps.
South & Southeast Asia
Vannamei ponds, biofloc, hatcheries, processing and export compliance.
North America
Indoor RAS, retrofit and expansion projects with lender documentation needs.
Join the network
Apply as a consultant, or send a client project
One form for both. Tell us your discipline and, if you have a live project, its scope. A person reads every submission — no public profile is created and your client is not contacted unless you ask us to.
Questions
What kind of aquaculture consultant do I need?
It depends on the decision in front of you. Sizing a recirculating system needs a RAS engineer; a pond intensification plan needs a shrimp or grow-out advisor; a lender pack needs a feasibility and financing-readiness advisor. Each discipline below lists the scope it normally owns.
Does FishMatch Group publish consultant names and contact details?
No. The network is confidential: no names, websites, emails or phone numbers are published for consultants or suppliers. Introductions are arranged case by case after a human review, and only with the agreement of both sides.
Are the consultants certified or ranked by FishMatch Group?
No. FishMatch Group does not license, certify or rank consultants and is not a consultancy itself. The directory describes disciplines and scope so a buyer can brief the right specialist.
How can a consultant join the network?
Use the form on this page or the partner program page. Every application is read by a person; there is no automatic listing and no public profile is created.
What does an aquaculture consultant normally cost?
Fees are set by each consultant, not by FishMatch Group, and vary widely by discipline, country and scope. Work is usually quoted as a day rate, a fixed fee per deliverable such as a feasibility study or RAS sizing basis, or a retainer across a build. Define the deliverable before asking for a fee, otherwise proposals are not comparable.
Do I need a RAS consultant, or can the equipment supplier design the system?
A supplier will size a system around the equipment it sells, which can be perfectly sound but is not independent. An independent RAS engineer writes the design basis — biomass, feed load, TAN, oxygen, turnover and redundancy — before suppliers quote, so every offer answers the same brief and can be compared.
What should I prepare before speaking to an aquaculture consultant?
Species and target annual production, intended market and harvest weight, the site's water source and temperature profile, available power, land or lease status, permitting position, indicative budget and the decision you need help with. The RFQ readiness check and the buyer profile builder produce most of that in one pass.
Can a consultant work on projects outside their home country?
Most do. What matters is whether the discipline transfers: RAS engineering and water treatment travel well, while permitting, species licensing and local construction practice usually need someone in-country alongside the specialist. Many projects use both.
What is the fastest way to get quotes for Aquaculture Consultant Directory?
Submit one structured request for Aquaculture Consultant Directory. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for Aquaculture Consultant Directory?
Submit one structured request for Aquaculture Consultant Directory. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.