Find verified RAS aquaculture system suppliers in Norway
One request, multiple anonymized supplier bids for RAS aquaculture system in Norway. No buyer fees. Supplier identities stay private.
Norway — Northern Europe. World leader in Atlantic salmon — sea-cage and land-based RAS. Main farmed species: salmon, trout.
Specify these four figures before requesting quotes
Quotes are only comparable when every supplier prices the same specification. These are the inputs that change everything downstream — fix them first, and the rest of the bill of quantities follows.
Design biomass & density
Peak standing biomass per tank and target kg/m³ at harvest size — every filtration and oxygen figure derives from it.
Recirculation rate
System turnover per hour and daily make-up water, which set pump duty, pipe sizing and heat load.
Oxygen demand at peak
Consumption at maximum temperature and feed load, including safety factor for feeding peaks.
Installed pumping head
Static plus friction head across drum filter, biofilter and degasser; the single most common cause of undersized pumps.
- Mechanical filtration (drum or belt) with sizing basis stated
- Biofilter type, media volume and expected TAN removal
- Degassing / CO₂ stripping and oxygenation equipment
- Disinfection (UV or ozone) with dose at design flow
- Pumps, piping, valves and instrumentation
- Control system, alarms and backup power interface
- Installation, commissioning, training and spares package
- →Recirculation intensity — a higher turnover multiplies pump, filter and energy cost
- →Materials: HDPE vs GRP vs stainless tanks and pipework
- →Automation depth: manual monitoring vs full SCADA with redundancy
- →Redundancy level for oxygen, power and pumping
- →Delivery terms (EXW vs CIF) and included commissioning days
How the sourcing process runs
- Step 1
Structured brief
You submit the project figures once. FishMatch normalises them into a single specification so every supplier answers the same question.
- Step 2
Matched shortlist
Suppliers are selected against the specification, export experience and service reach for your market — never a directory dump.
- Step 3
Comparable quotes
Bids are returned on the same scope, so differences reflect engineering and delivery terms rather than what each vendor chose to include.
- Step 4
Financing review (optional)
Projects that need funding are reviewed for readiness and, where appropriate, introduced to financing partners. FishMatch is not a lender.
Go deeper
FAQ
Popular searches
Short answer
How do you build and equip a project for RAS Suppliers In Norway?
Feasibility in RAS Suppliers In Norway is decided by water, energy, permitting and logistics before equipment choice. FishMatch Group benchmarks the local cost base, matches the system type to site conditions, and sources equipment and turn-key scopes from international suppliers who already ship and commission in the region — with landed cost, duties and lead time included in the comparison.
- What decides feasibility:
- Water availability, energy cost, permitting and route to market
- Sourcing:
- International suppliers with regional shipping and commissioning experience
- Landed cost:
- Quotations include freight, duties and installation assumptions
- Cost to buyers:
- No fee charged to the buyer
Before you request quotes
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.
Supplier selection criteria
How should a buyer compare aquaculture suppliers?
Compare on evidence, not on presentation: delivered projects at a similar scale and climate, engineering support during design, lead time commitments, spare-part and service availability in your region, certification and testing documentation, payment and warranty terms, and willingness to quote against your specification rather than substituting a catalogue package.
What are the warning signs in a supplier quotation?
Treat these as review triggers: no itemised scope, guaranteed biological or financial performance, no named delivery terms or lead time, no spare-parts or service statement, unclear responsibility for installation and commissioning, and equipment sizing that does not reference your water temperature, oxygen demand or biomass targets.
How does FishMatch handle supplier selection?
FishMatch is an independent sourcing layer, not a manufacturer or reseller. Requirements are structured into a single technical RFQ and routed to relevant producers; buyers receive comparable offers without supplier identities being exposed before they choose to proceed. Selection stays with the buyer — FishMatch standardises the comparison basis.