Sourcing aquacole, simplifié.

Trouvez des fournisseurs de systèmes RAS aquacoles en Norvège

Une demande, plusieurs offres anonymes pour des systèmes RAS aquacoles en Norvège. Confidentialité des acheteurs préservée.

Recevoir des offres
Market context

Norway — Northern Europe. World leader in Atlantic salmon — sea-cage and land-based RAS. Main farmed species: salmon, trout.

Specify these four figures before requesting quotes

Quotes are only comparable when every supplier prices the same specification. These are the inputs that change everything downstream — fix them first, and the rest of the bill of quantities follows.

Design biomass & density

Peak standing biomass per tank and target kg/m³ at harvest size — every filtration and oxygen figure derives from it.

Recirculation rate

System turnover per hour and daily make-up water, which set pump duty, pipe sizing and heat load.

Oxygen demand at peak

Consumption at maximum temperature and feed load, including safety factor for feeding peaks.

Installed pumping head

Static plus friction head across drum filter, biofilter and degasser; the single most common cause of undersized pumps.

What a comparable quote contains
  • Mechanical filtration (drum or belt) with sizing basis stated
  • Biofilter type, media volume and expected TAN removal
  • Degassing / CO₂ stripping and oxygenation equipment
  • Disinfection (UV or ozone) with dose at design flow
  • Pumps, piping, valves and instrumentation
  • Control system, alarms and backup power interface
  • Installation, commissioning, training and spares package
What drives the price difference
  • →Recirculation intensity — a higher turnover multiplies pump, filter and energy cost
  • →Materials: HDPE vs GRP vs stainless tanks and pipework
  • →Automation depth: manual monitoring vs full SCADA with redundancy
  • →Redundancy level for oxygen, power and pumping
  • →Delivery terms (EXW vs CIF) and included commissioning days

How the sourcing process runs

  1. Step 1

    Structured brief

    You submit the project figures once. FishMatch normalises them into a single specification so every supplier answers the same question.

  2. Step 2

    Matched shortlist

    Suppliers are selected against the specification, export experience and service reach for your market — never a directory dump.

  3. Step 3

    Comparable quotes

    Bids are returned on the same scope, so differences reflect engineering and delivery terms rather than what each vendor chose to include.

  4. Step 4

    Financing review (optional)

    Projects that need funding are reviewed for readiness and, where appropriate, introduced to financing partners. FishMatch is not a lender.

Go deeper

FAQ

Une seule demande, notre équipe contacte les fournisseurs qualifiés. Les identités restent privées.

Non. Les acheteurs ne paient jamais de frais initiaux.

Un membre de l'équipe FishMatch répond sous un jour ouvré. Le délai des devis dépend du périmètre du projet et des réponses des fournisseurs ; aucun délai n'est garanti.

Oui, les projets éligibles peuvent être mis en relation avec des partenaires financiers.