FishMatchGroup
Sign in
Back to home
← 모든 RAS 가이드

RAS 비용은 얼마나 듭니까?

빠른 답변

표준적인 범위로, 상업용 RAS CAPEX는 종, 규모, 부지 및 설계에 따라 연간 생산량 톤당 USD 15,000–28,000 정도이며, 생산 비용은 kg당 USD 3.5–5.5 정도입니다. 초기 선별 목적으로만 사용하십시오.

CAPEX: 건설 투자 비용

  • 수조, 여과, 펌프, 산소 및 수처리 시설
  • 건물, 단열 및 유틸리티
  • 비상 전원 및 전기 설비
  • 포함된 경우 부화장 또는 양어장
  • 엔지니어링, 설치 및 시운전

OPEX: kg당 운영 비용

  • 사료 (가장 큰 비중)
  • 전기
  • 치어 (알, 새끼 물고기 또는 스몰트)
  • 인건비
  • 산소, 유지보수 및 보험

주요 비용 동인

규모는 큰 영향을 미칩니다: 대규모 농장은 보통 톤당 비용이 적습니다. 어종 온도, 염도, 현지 건설 비용 및 에너지 가격도 수치를 변화시킵니다.

프로젝트 추정

저희의 무료 양식장 비용 계산기를 사용하여 귀하의 국가와 어종에 대한 CAPEX 및 OPEX를 모델링한 다음, 그 결과를 프로젝트 요청과 함께 보내주십시오.

비용 수치는 초기 계획을 위한 잠정적인 범위이며, 견적이 아닙니다. 실제 가격은 어종, 규모, 부지 및 공급업체에 따라 달라집니다.

자주 묻는 질문

RAS 프로젝트를 계획 중이신가요?

한 번의 요청으로 저희 팀이 적합하고 검증된 RAS 공급업체를 엄선하고 비교 가능한 견적을 준비해 드립니다. 자동화된 시장이 아닌 사람이 검토합니다.

프로젝트 요청서 제출RAS 비용 추정

관련 RAS 가이드

Short answer

What is the fastest way to get quotes for RAS Cost Per Kg?

Submit one structured request for RAS Cost Per Kg. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for RAS Cost Per Kg?

Submit one structured request for RAS Cost Per Kg. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ