¿Por qué el RAS es más caro que los estanques?

El RAS necesita edificios, filtración, bombas y sistemas de respaldo. A cambio, produce mucho más pescado por metro cuadrado con mejor control y menor uso de agua.

← Todas las guías RAS

¿Cuánto cuesta un RAS?

Respuesta rápida

Como rango indicativo, el CAPEX de RAS comercial suele oscilar entre USD 15.000 y 28.000 por tonelada de capacidad anual, y el costo de producción entre USD 3.5 y 5.5 por kg, dependiendo de la especie, escala, sitio y diseño. Utilice estos datos solo para una evaluación inicial.

CAPEX: lo que paga para construir

Tanques, filtración, bombas, oxígeno y tratamiento de agua
Edificación, aislamiento y servicios públicos
Energía de respaldo y trabajos eléctricos
Criadero o vivero si está incluido
Ingeniería, instalación y puesta en marcha

OPEX: costo por kg

Alimento (a menudo el ítem más grande)
Electricidad
Juveniles (huevos, alevines o esmolt)
Mano de obra
Oxígeno, mantenimiento y seguro

Principales impulsores de costo

La escala tiene un gran efecto: las granjas más grandes suelen costar menos por tonelada. La temperatura de la especie, la salinidad, los costos de construcción locales y el precio de la energía también modifican los números.

Estime su proyecto

Utilice nuestras calculadoras gratuitas de costos de granja para modelar el CAPEX y OPEX para su país y especie, luego envíe el resultado con su solicitud de proyecto.

Las cifras de costes son rangos indicativos para la planificación inicial, no cotizaciones. Los precios reales dependen de la especie, escala, ubicación y proveedor.

Preguntas frecuentes

¿Planificando un proyecto RAS?

Envíe una solicitud y nuestro equipo preselecciona proveedores de RAS verificados y prepara cotizaciones comparables. Revisado por humanos, sin mercado automatizado.

Enviar una solicitud de proyecto Estimar costes RAS

Guías RAS relacionadas

Short answer

What is the fastest way to get quotes for RAS Cost Per Kg?

Submit one structured request for RAS Cost Per Kg. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:: One structured request, human-reviewed before any supplier outreach
Typical turnaround:: Depends on scope and site data; no turnaround is guaranteed
Confidentiality:: Supplier names are never exposed during evaluation
Cost to buyers:: No fee charged to the buyer

What is the fastest way to get quotes for RAS Cost Per Kg?

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ