FishMatchGroup
Sign in
Back to home
← すべてのRASガイド

RASの費用はどのくらいですか？

クイックアンサー

商業用RASのCAPEXは、おおよその目安として、年間生産能力1トンあたりUSD 15,000〜28,000、生産コストは魚種、規模、場所、設計によって1kgあたりUSD 3.5〜5.5程度です。これらは初期のスクリーニングにのみご使用ください。

CAPEX：建設費用

  • タンク、ろ過設備、ポンプ、酸素供給・水処理設備
  • 建物、断熱材、公益設備
  • バックアップ電源および電気工事
  • 含まれる場合、孵化場または稚魚育成施設
  • エンジニアリング、設置、試運転

OPEX：1kgあたりのコスト

  • 飼料（しばしば最大の項目）
  • 電気代
  • 種苗（卵、稚魚、スモルト）
  • 人件費
  • 酸素、メンテナンス、保険

主なコスト要因

規模が大きく影響します。通常、大規模な養殖場ほど1トンあたりのコストは低くなります。魚種の適正水温、塩分濃度、現地の建設費、エネルギー価格も数字を変動させます。

プロジェクトの見積もり

当社の無料養殖場コスト計算ツールを使用して、お客様の国と魚種に応じたCAPEXとOPEXをモデル化し、その結果をプロジェクトのリクエストと共にお送りください。

コストの数値は初期計画のための目安であり、見積もりではありません。実際の価格は魚種、規模、場所、サプライヤーによって異なります。

よくあるご質問

RASプロジェクトを計画中ですか？

一度リクエストを送信するだけで、当社のチームが信頼できるRASサプライヤーを厳選し、比較可能な見積もりを作成します。人間による審査を行い、自動化されたマーケットプレイスではありません。

プロジェクト依頼を送るRASコストを見積もる

関連するRASガイド

Short answer

What is the fastest way to get quotes for RAS Cost Per Kg?

Submit one structured request for RAS Cost Per Kg. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for RAS Cost Per Kg?

Submit one structured request for RAS Cost Per Kg. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ