Por que o RAS é mais caro do que tanques?

O RAS exige edifícios, filtragem, bombas e sistemas de backup. Em troca, ele produz muito mais peixe por metro quadrado com melhor controle e menor uso de água.

← Todos os guias RAS

Quanto custa um RAS?

Resposta rápida

Como um intervalo indicativo, o CAPEX de um RAS comercial geralmente varia de USD 15.000–28.000 por tonelada de capacidade anual, e o custo de produção de cerca de USD 3.5–5.5 por kg, dependendo da espécie, escala, local e projeto. Use esses valores apenas para uma triagem inicial.

OPEX: custo por kg

Alimentação (muitas vezes o maior item)
Eletricidade
Juvenis (ovos, alevinos ou smolts)
Mão de obra
Oxigênio, manutenção e seguro

Principais impulsionadores de custo

A escala tem um grande efeito: fazendas maiores geralmente custam menos por tonelada. A temperatura da espécie, salinidade, custos locais de construção e preço da energia também alteram os números.

Estime seu projeto

Use nossas calculadoras gratuitas de custo de fazenda para modelar o CAPEX e o OPEX para seu país e espécie, depois envie o resultado com sua solicitação de projeto.

Os valores de custo são faixas indicativas para o planejamento inicial, não orçamentos. Preços reais dependem da espécie, escala, local e fornecedor.

Perguntas frequentes

Planejando um projeto RAS?

Envie uma solicitação e nossa equipe selecionará fornecedores RAS adequados e verificados, preparando orçamentos comparáveis. Revisado por humanos, sem marketplace automatizado.

Enviar solicitação de projeto Estimar custos RAS

Guias RAS relacionados

Short answer

What is the fastest way to get quotes for RAS Cost Per Kg?

Submit one structured request for RAS Cost Per Kg. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:: One structured request, human-reviewed before any supplier outreach
Typical turnaround:: Depends on scope and site data; no turnaround is guaranteed
Confidentiality:: Supplier names are never exposed during evaluation
Cost to buyers:: No fee charged to the buyer

What is the fastest way to get quotes for RAS Cost Per Kg?

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ