FishMatchGroup
Sign in
Back to home
← Alle RAS-Leitfäden

Wie viel kostet eine RAS?

Kurzantwort

Als Richtwert liegen die CAPEX für kommerzielle RAS oft bei USD 15.000–28.000 pro Tonne Jahreskapazität und die Produktionskosten bei etwa USD 3.5–5.5 pro kg, abhängig von Spezies, Größe, Standort und Design. Diese Werte dienen nur der Vorprüfung.

CAPEX: Was Sie für den Bau zahlen

  • Becken, Filtration, Pumpen, Sauerstoff- und Wasseraufbereitung
  • Gebäude, Isolierung und Versorgungseinrichtungen
  • Notstromversorgung und Elektroinstallationen
  • Bruthaus oder Aufzuchtanlage, falls inbegriffen
  • Engineering, Installation und Inbetriebnahme

OPEX: Kosten pro kg

  • Futter (oft der größte Posten)
  • Strom
  • Jungfische (Eier, Larven oder Smolts)
  • Arbeitskraft
  • Sauerstoff, Wartung und Versicherung

Hauptkostentreiber

Der Maßstab hat einen großen Einfluss: größere Farmen kosten pro Tonne meist weniger. Artentemperatur, Salzgehalt, lokale Baukosten und Energiepreise beeinflussen die Zahlen ebenfalls.

Kalkulieren Sie Ihr Projekt

Nutzen Sie unsere kostenlosen Farmkostenrechner, um CAPEX und OPEX für Ihr Land und Ihre Spezies zu modellieren, und senden Sie dann das Ergebnis mit Ihrer Projektanfrage.

Kostenangaben sind Richtwerte für die Frühplanung, keine Angebote. Reale Preise hängen von Art, Umfang, Standort und Lieferant ab.

Häufig gestellte Fragen

Planen Sie ein RAS-Projekt?

Senden Sie eine Anfrage, und unser Team wählt geeignete, geprüfte RAS-Lieferanten aus und erstellt vergleichbare Angebote. Von Menschen geprüft, kein automatisierter Marktplatz.

Projektanfrage sendenRAS-Kosten schätzen

Verwandte RAS-Leitfäden

Short answer

What is the fastest way to get quotes for RAS Cost Per Kg?

Submit one structured request for RAS Cost Per Kg. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for RAS Cost Per Kg?

Submit one structured request for RAS Cost Per Kg. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ