FishMatchGroup
Sign in
Back to home
← すべてのRASガイド

RASのエネルギー使用量とその削減方法

クイックアンサー

RASにおけるエネルギーは主に水の汲み上げ、曝気または酸素供給、そして加温または冷却に使用されます。最大の節約は、低揚程システム設計、可変速ドライブ付き高効率ポンプ、優れた断熱、熱回収、および適切な場所でのオンサイト太陽光発電によって達成されます。

エネルギーの使途

  • フィルターおよび水槽への水送水
  • ブロワー、脱ガス、酸素発生
  • 魚種温度維持のための加温または冷却
  • UV、オゾン、照明、制御装置

kWh/kgを削減する方法

  • 水を可能な限り低く揚げる低揚程設計
  • 高効率ポンプと可変速ドライブ
  • 断熱された建物と熱交換器
  • 直接電気加熱ではなくヒートポンプの利用
  • 可能な場合は太陽光発電と夜間電力料金の活用
  • 無駄を見つけるためのユニットごとのエネルギー計測

サプライヤーにエネルギーデータを確認

各サプライヤーに対し、規定の条件下で生産される魚1kgあたりの予想kWhを尋ねてください。提案を比較する際には、同じ電気料金を使用してください。

よくあるご質問

RASプロジェクトを計画中ですか？

一度リクエストを送信するだけで、当社のチームが信頼できるRASサプライヤーを厳選し、比較可能な見積もりを作成します。人間による審査を行い、自動化されたマーケットプレイスではありません。

プロジェクト依頼を送るRASコストを見積もる

関連するRASガイド

Short answer

What is the fastest way to get quotes for RAS Energy Efficiency?

Submit one structured request for RAS Energy Efficiency. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for RAS Energy Efficiency?

Submit one structured request for RAS Energy Efficiency. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ