FishMatchGroup
Sign in
Back to home
← すべてのRASガイド

RAS養殖場に最適な立地を選ぶ方法

クイックアンサー

良いRASの立地は、水質の知られた信頼できる補給水源、バックアップ発電の余地がある安定的で手頃な電力、排水の法的な経路、適切な区画、稚魚、飼料、買い手への良好な道路アクセスを備えています。

水源と水質

RASは池や掛け流し式養殖場に比べ、使用する新しい水は少ないですが、信頼できる水源が必要です。地下水、掘削井戸水、または都市用水の塩分、鉄、マンガン、硬度、病原体、季節変動を検査してください。

電力：飼料に次ぐ最大の運営コスト

ポンプ、酸素供給、加温、冷却により、電気代は最大の運営コストの一つです。送電網の容量、産業用料金、停電履歴、および発電機や太陽光発電を設置できるかを確認してください。

排水と汚泥

栄養塩類の排水と汚泥処理に関する地域の規制は、立地を制限する可能性があります。汚泥濃縮と、農業やバイオガスなどの合法的な処理または再利用経路を計画してください。

立地選定チェックリスト

  • 水量の確保、水質検査、法的取水権
  • 送電網接続規模、料金、停電記録
  • 養殖または工業利用のためのゾーニング
  • 排水許可経路
  • 洪水、地震、気候のリスク
  • 飼料、稚魚、運搬トラックのための道路アクセス
  • 加工施設や主要な買い手までの距離
  • 利用可能な熟練労働者

よくあるご質問

RASプロジェクトを計画中ですか？

一度リクエストを送信するだけで、当社のチームが信頼できるRASサプライヤーを厳選し、比較可能な見積もりを作成します。人間による審査を行い、自動化されたマーケットプレイスではありません。

プロジェクト依頼を送るRASコストを見積もる

関連するRASガイド

Short answer

What is the fastest way to get quotes for Selecting A RAS Site?

Submit one structured request for Selecting A RAS Site. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for Selecting A RAS Site?

Submit one structured request for Selecting A RAS Site. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ