← 모든 RAS 가이드

RAS 프로젝트를 단계별로 계획하는 방법

빠른 답변

RAS 프로젝트는 다음 순서로 계획하십시오: 시장과 가격 확인, 어종과 연간 생산량 선택, 용수, 전력 및 인허가를 갖춘 부지 확보, 설계 기준 작성, 비상 자금 포함 예산 책정, 그리고 동일한 사양으로 최소 3개 RAS 공급업체 비교 후 계약.

1. 기술이 아닌 시장부터 시작

RAS 프로젝트가 실패하는 가장 흔한 이유는 필터나 펌프 때문이 아닙니다. 킬로그램당 충분한 비용을 지불할 구매자와 일치하지 않는 생산 계획 때문입니다. 모든 설계 작업 전에 누가, 어떤 크기로, 어떤 형태로, 어떤 가격으로 물고기를 구매할지 확인하십시오.

목표 출하 가격과 보수적인 판매량을 기록하십시오. 이 단일 숫자가 프로젝트가 감당할 수 있는 자본 규모를 결정합니다.

2. 어종 및 규모 선택

어종은 온도, 염도, 사육 밀도, 성장 시간 및 장비를 결정합니다. 연어, 송어, 바라문디, 도미, 능성어, 틸라피아, 새우는 모두 다른 시스템 설계가 필요합니다.

  • 연간 수확 목표 (톤)
  • 수확 크기 및 연간 배치 수
  • 치어 출처: 자체 부화장 또는 구매한 치어/치어
  • 염도 및 온도 범위

3. 부지 확보

RAS는 보충용 신뢰할 수 있는 용수와 비상 전력이 있는 안정적인 전력 공급이 필요합니다. 설계 비용을 지불하기 전에 진입 도로, 배출 규정, 용도 지역 및 시장과의 거리를 확인하십시오.

4. 설계 기준 작성

설계 기준은 생산량, 어종, 사료 부하, 수질 목표, 중복성 수준 및 건물 유형과 같은 핵심 수치를 명시하는 간략한 문서입니다. 공급업체는 이를 기준으로 견적을 내며, 이는 그들의 제안을 비교 가능하게 만듭니다.

5. 예산, 자금 조달 및 비상 자금

최소 10–15%의 비상 자금을 포함한 CAPEX 및 OPEX 모델을 구축하십시오. 건물, 유틸리티, 비상 전력, 산소, 시운전, 초기 18–24개월 운영 자본 및 직원 교육을 포함해야 합니다.

6. 동일한 사양으로 공급업체 비교

최소 3개 RAS 공급업체에게 동일한 설계 기준에 따라 견적을 요청하십시오. 주요 가격뿐만 아니라 범위, 보증, 참고 자료, 교육 및 서비스를 비교하십시오.

7. 인허가, 건설 및 시운전

인허가는 건설보다 오래 걸리는 경우가 많습니다. 환경 및 용수 인허가를 일찍 시작하십시오. 첫 전체 입식 전에 생물학적 시운전을 포함한 단계별 가동을 계획하십시오.

자주 묻는 질문

RAS 프로젝트를 계획 중이신가요?

한 번의 요청으로 저희 팀이 적합하고 검증된 RAS 공급업체를 엄선하고 비교 가능한 견적을 준비해 드립니다. 자동화된 시장이 아닌 사람이 검토합니다.

관련 RAS 가이드

Short answer

What is the fastest way to get quotes for Planning A RAS Project?

Submit one structured request for Planning A RAS Project. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for Planning A RAS Project?

Submit one structured request for Planning A RAS Project. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a reviewed RFQ