FishMatchGroup
Sign in
Back to home
Planning Center로 돌아가기
카테고리 · Procurement

Equipment Comparison Sheet

Equipment Comparison Sheet은(는) 전문 양식업 프로젝트 계획을 위한 무료·중립 계산기입니다. Side-by-side kW, m³/hr, capex/opex, spare parts, life. 장비 사이징, 공급사 제안 검증, 입찰 전 견고한 기술 사양 작성에 사용하세요. 모든 계산은 브라우저 내에서 실행되며 가입이 필요 없습니다.

도구 열기 RFQ 요청

대상

  • 새로운 어류·새우 프로젝트를 산정하는 투자자.
  • 은행 제출용 타당성 조사를 준비하는 엔지니어링 회사.
  • 국제 입찰을 발주하는 조달 담당자.
  • 확장을 검토하는 종묘장·RAS·가공 운영자.

사용 방법

  1. 1품종, 규모, 부지 조건 등 프로젝트 파라미터를 입력합니다.
  2. 2산업 벤치마크가 적용되어 치수화된 결과가 반환됩니다.
  3. 3결과를 사양서와 RFQ에 그대로 복사하세요.

이점

  • 특정 공급사에 종속되지 않는 중립 엔지니어링 수치.
  • 견적 요청 전 불확실성을 제거.
  • 예산·엔지니어링·조달을 하나의 숫자로 정렬.
  • RFQ 항목 또는 파이낸싱 입력으로 즉시 전환.

자주 묻는 질문

관련 도구

RFQ Readiness Score
10-factor checklist scored 0–100 with missing-info list.
Technical Specification Builder
Guided spec: species, systems, utilities, tolerances, tests.
Supplier Comparison Matrix
Score suppliers on price, lead time, warranty, service, references.
Procurement Checklist
35-point pre-tender / tender / award / delivery checklist.
Tender Preparation Guide
How to structure an international aquaculture tender.
Import Cost Planner
Duties, VAT, port fees, inland freight, installation.

관련 가이드

RAS Project Planning
Sizing land-based recirculating aquaculture systems end-to-end.
Shrimp Farm Design
Vannamei pond, raceway, biofloc and RAS design fundamentals.
Fish Farm Design
Species, systems, water, energy and site selection.
Hatchery Engineering
Broodstock, larval rearing, biosecurity zoning and water flow.

언어

EnglishEspañolPortuguêsFrançaisDeutschItalianoРусскийTürkçeالعربية简体中文日本語한국어
공급사나 파이낸싱을 찾으시나요?
한 번의 요청. 검증된 국제 파트너의 복수 제안. 구매자는 절대 비용을 지불하지 않습니다.
RFQ 요청 파이낸싱 보기 전문가와 상담

Short answer

How do you source Equipment Comparison Sheet for a commercial aquaculture project?

Start from the process requirement — biomass, flow, water quality target and site constraints — not from a product catalogue. FishMatch Group converts that requirement into a specification for Equipment Comparison Sheet, sources it from vetted manufacturers and integrators across Europe, Asia and the Americas, and returns like-for-like quotations with lead times, energy consumption and lifetime running cost stated in the same format.

What we compare:
Scope, capacity, energy use, lead time and total cost of ownership
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Delivery terms:
Quotations normalised to EXW / FOB / CIF so prices are like-for-like
Cost to buyers:
No fee charged to the buyer

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Get Free QuotesFinancing