全部采购问答

采购问答 · 成鱼养殖系统

成鱼养殖该选池塘、网箱、流水还是循环水系统?

成鱼养殖系统将中间培育后的苗种养至上市规格,通常占项目投资和运行成本的大部分。选型需结合品种、产量、水源、气候、土地及电力条件,按单位产量总成本比较。询价时应提供年产量、起捕规格、目标密度、场址与水源数据、生产方式、设备或交钥匙范围以及交付地点等资料。

水产养殖中的成鱼养殖系统是什么?

成鱼养殖系统用于将中间培育后的苗种养至上市规格。按养殖容积、CAPEX 和运行成本衡量,它通常都是养殖场占比最大的部分。因此,选择池塘、网箱、流水养殖还是 RAS,会决定项目预算的大部分支出。

如何选择成鱼养殖系统?

应从养殖品种、目标产量、水源条件、气候、土地及电力条件出发。RAS 节水、省地,但能耗和资金投入更高;池塘及网箱建设成本较低,但更依赖场址条件。比较方案时,应看每 kg 产量的总成本,而不是只看采购价格。

供应商报价需要哪些成鱼养殖项目资料?

需要养殖品种、年产量及起捕规格、目标养殖密度、场址及水源数据、生产方式、供货范围(仅设备或交钥匙项目)和交付地点。初步数据即可;FishMatch 会在邀请供应商报价前协助补齐信息。

水产养殖项目规划参考指标

FishMatch Group 计算器采用的全球规划参考区间。最终数值需结合供应商报价和项目现场数据确认。
指标数值说明
CAPEX(资本性支出)— RAS(循环水养殖系统)USD 9,000–14,000 per tonne/yr未应用所在国成本系数调整前的全球基准。
CAPEX — 池塘USD 1,800–4,000 per tonne/yr铺膜池塘或土塘,不含土地成本。
CAPEX — 网箱USD 2,500–5,500 per tonne/yr包括网箱、锚泊系统、网衣及配套作业设备。
CAPEX — 流水养殖USD 4,000–7,000 per tonne/yr包括流水槽及取水工程。
能耗RAS ~6 kWh/kg;池塘 ~1.2;流水养殖 ~1.5;网箱 ~0.3以每 kg 鱼产量计。
典型 FCR(饲料系数)鳟鱼 1.1;鲑鱼 1.2;虾 1.4;罗非鱼 1.6;鲤鱼 1.8每 kg 增重所需的饲料 kg 数;随饲料和管理水平而变化。
FishMatch 受理评估的养殖项目规模项目总投资额约 USD 250,000 起面向商业化鱼类和虾类养殖项目。

Short answer

What is the fastest way to get quotes for Grow Out System?

Submit one structured request for Grow Out System. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for Grow Out System?

Submit one structured request for Grow Out System. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Start a reviewed RFQ