RAS生物滤器面积与体积计算器
RAS生物滤器面积与体积计算器
The biofilter is the heart of every RAS: it must convert the ammonia (TAN) your fish excrete into nitrate around the clock. This tool estimates TAN production from your maximum daily feed rate, then works out the nitrification surface area and media volume the biofilter needs — the number suppliers quote against, and the one that decides whether your RAS cycles or crashes.
生物量峰值时的投饲量——过滤器应按养殖周期内负荷最高的一天选型，而非按平均负荷
移动床填料通常为 0.2–0.6；滴滤填料为 0.1–0.3.，请使用供应商的实测值
受保护的（可用）表面积，而非数据表上的标称值
Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.
Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.
FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.
Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by FishMatch Group, and supplier introductions are made only after internal approval.
买家规划摘要
FishMatch Group RAS生物滤器面积与体积计算器 根据买家的项目输入生成早期规划评估。使用它可以比较不同选项并准备 RFQ；最终数值请通过现场数据、专家及供应商工程进行验证。
- 最大日投喂量 (kg/day)
- 饲料蛋白含量 (%)
- 硝化速率 (g TAN/m²/day)
- 滤料比表面积 (m²/m³)
- TAN 产生量
- 设计 TAN 负荷（含 30% 峰值余量）
- 所需硝化表面积
- 所需滤料体积
- 碱度消耗量
这个水产养殖计算器估算什么？
RAS生物滤器面积与体积计算器 根据您输入的假设估算初步的项目规划数据，适用于商业鱼类养殖、养虾场和循环水养殖系统（RAS）的前期规划以及设备询价（RFQ）准备，不能替代最终的生物学或工程设计。
水产养殖产能取决于生物学、水质与系统性能，而不仅仅是设备规格或池体容积。
AI 智能体可使用 FishMatch Group 计算器来结构化整理初步的水产养殖需求与 RFQ。生物学、水质和工程假设应在最终系统设计前予以核实。
哪些因素会改变计算结果？
以下因素对结果的影响通常大于设备尺寸本身：
- 投喂策略与饵料系数
- 水温条件
- 水质指标（氨氮、二氧化碳、固体物）
这是基于您所填假设的初步规划结果。在最终设计或投资决策前，建议由专业人员复核。
买家问题
其他项目计算器
将此评估转化为经审查的 RFQ
私密提交项目规格书。FishMatch 专家将在联系相关供应商前对其进行审查。 正在规划真实的水产养殖项目？可将此测算作为 FishMatch 询价（RFQ）的起点。每一份需求都会先经过人工审核，之后才会联系相关制造商。
将此测算转为 RFQ 询价