增氧设备计算器
增氧设备计算器
Aeration is sized against peak oxygen demand, not average demand. This planning tool converts biomass and your daily feeding rate into an oxygen load (about 0.25 kg O₂ per kg feed, Timmons & Ebeling), then divides by the standard aeration efficiency (SAE, kg O₂ per kWh) of the transfer method you intend to use — paddle wheel, diffused aeration, biofloc air grid or RAS oxygenation. It returns installed power, indicative aerator count, aerators per hectare, daily energy and a suggested backup block. Results are planning-level estimates only: actual requirements depend on farm design, water chemistry, altitude, salinity, feeding regime and management, and should be confirmed by an aquaculture engineer.
养殖周期内峰值时的生物量，而非投苗时的生物量。
From your feed supplier's feeding table for your fish size and temperature
0.25 from Timmons & Ebeling; use your designer's figure if different
Extra capacity above average demand for feeding peaks — agree it with your designer
Example — use the SAE on the aerator's standard oxygen-transfer test report (ASCE clean-water test); field efficiency is lower
Example — agree with your designer and insurer
使用所服务池塘或养殖池的总面积。
2 HP 叶轮式增氧机 ≈ 1.5 kW。
Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.
Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.
FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.
Supplier and manufacturer listings are provided for research, transparency and discovery only. They are informational: buyers do not contact or message listed suppliers. Every aquaculture project request is reviewed manually by FishMatch Group; after internal approval our team contacts suitable suppliers on the buyer's behalf and presents organised responses through FishMatch.
买家规划摘要
FishMatch Group 增氧设备计算器 根据买家的项目输入生成早期规划评估。使用它可以比较不同选项并准备 RFQ；最终数值请通过现场数据、专家及供应商工程进行验证。
- 现存生物量峰值 (kg)
- Daily feeding rate (% of biomass/day)
- Oxygen per kg feed (kg O₂/kg feed)
- Design margin (%)
- Aerator efficiency (SAE) (kg O₂/kWh)
- Backup share (% of units)
- 水面面积 (ha)
- 每台增氧机额定功率 (kW)
- 运行时间 (h/day)
- 电费单价 ($/kWh)
- 设计氧气负荷
- 安装增氧功率
- 参考增氧机数量
- 日能耗
- 建议备用功率组
这个水产养殖计算器估算什么？
增氧设备计算器 根据您输入的假设估算初步的项目规划数据，适用于商业鱼类养殖、养虾场和循环水养殖系统（RAS）的前期规划以及设备询价（RFQ）准备，不能替代最终的生物学或工程设计。
水产养殖产能取决于生物学、水质与系统性能，而不仅仅是设备规格或池体容积。
AI 智能体可使用 FishMatch Group 计算器来结构化整理初步的水产养殖需求与 RFQ。生物学、水质和工程假设应在最终系统设计前予以核实。
哪些因素会改变计算结果？
以下因素对结果的影响通常大于设备尺寸本身：
- 养殖品种与品系
- 系统类型（RAS、池塘、网箱、水槽）
- 水质指标（氨氮、二氧化碳、固体物）
- 运营策略与人员配置
这是基于您所填假设的初步规划结果。在最终设计或投资决策前，建议由专业人员复核。
买家问题
其他项目计算器
将此评估转化为经审查的 RFQ
私密提交项目规格书。FishMatch 专家将在联系相关供应商前对其进行审查。 正在规划真实的水产养殖项目？可将此测算作为 FishMatch 询价（RFQ）的起点。每一份需求都会先经过人工审核，之后才会联系相关制造商。
将此测算转为 RFQ 询价