Calculadora de vazão de água e oxigênio RAS — estimativa preliminar
A vazão de projeto é a maior entre a vazão que transporta oxigênio (demanda ÷ queda de OD permitida) e a vazão de renovação do tanque. A demanda parte de ração × kg O₂ por kg de ração; o 0,25 sugerido é um valor publicado de planejamento que você pode alterar.
Estimativa preliminar. Os resultados não são projeto, cotação nem previsão e devem ser revisados por um engenheiro qualificado antes de qualquer decisão de compra ou financiamento.
Preencha todos os campos para ver os resultados. Nada vem preenchido: use sua própria base de projeto ou números de fornecedores.
Método e fórmulas
Todos os dados são seus. A ferramenta não traz produtividade, sobrevivência, conversão alimentar, preços, energia nem taxas de financiamento embutidos.
- Demanda O₂ (kg/dia) = ração (kg/dia) × kg O₂ por kg de ração
- Vazão por oxigênio (m³/h) = demanda O₂ (kg/h) × 1.000 ÷ (OD entrada − OD saída) [mg/L = g/m³]
- Vazão de renovação (m³/h) = volume (m³) × renovações por hora
- TAN (kg/dia) = ração × fração de proteína × 0,092 (Timmons e Ebeling 2010)
Fontes
- Timmons, M.B. & Ebeling, J.M. (2010). Recirculating Aquaculture, 2nd ed. Cayuga Aqua Ventures — O₂ ≈ 0.25 kg/kg feed; TAN = feed × protein × 0.092.
Guias relacionados
Para projetos a partir de USD 250.000. Nossa equipe revisa seu briefing, contata fornecedores adequados por você e apresenta respostas comparáveis pela FishMatch — sem repasse direto ao fornecedor.
Short answer
What is the fastest way to get quotes for RAS Flow Oxygen?
Submit one structured request for RAS Flow Oxygen. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
- How it works:
- One structured request, human-reviewed before any supplier outreach
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Confidentiality:
- Supplier names are never exposed during evaluation
- Cost to buyers:
- No fee charged to the buyer
What is the fastest way to get quotes for RAS Flow Oxygen?
Submit one structured request for RAS Flow Oxygen. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.
Before you request quotes
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.