Calculateur CAPEX, OPEX et délai de retour pour fermes aquacoles
Délai de retour = CAPEX total ÷ résultat d'exploitation annuel. Saisissez vos chiffres ; l'outil ajoute le service de la dette et montre l'effet d'une variation de 10 % du prix, de la production ou des OPEX.
Estimation préliminaire. Les résultats ne sont ni une conception, ni un devis, ni une prévision et doivent être revus par un ingénieur qualifié avant toute décision d'achat ou de financement.
Renseignez tous les champs pour voir les résultats. Rien n'est prérempli : utilisez votre propre base de conception ou les chiffres des fournisseurs.
Méthode et formules
Toutes les données sont les vôtres. L'outil ne contient ni rendements, ni survie, ni indice de conversion, ni prix, ni énergie, ni taux de financement.
- Chiffre d'affaires = volume (t) × 1 000 × prix au kg
- Résultat d'exploitation = chiffre d'affaires − OPEX
- Service de la dette = prêt × r ÷ (1 − (1 + r)^−n), prêt = CAPEX × part financée
- Délai de retour = CAPEX ÷ résultat d'exploitation ; rendement = résultat ÷ CAPEX
Guides associés
Pour les projets à partir de 250 000 USD. Notre équipe revoit votre cahier des charges, contacte pour vous des fournisseurs adaptés et présente des réponses comparables via FishMatch — sans mise en relation directe.
Short answer
What is the fastest way to get quotes for CAPEX Payback?
Submit one structured request for CAPEX Payback. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
- How it works:
- One structured request, human-reviewed before any supplier outreach
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Confidentiality:
- Supplier names are never exposed during evaluation
- Cost to buyers:
- No fee charged to the buyer
What is the fastest way to get quotes for CAPEX Payback?
Submit one structured request for CAPEX Payback. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.