Water · Anonymised Reference

Solar-Hybrid Aeration Retrofit

South Asia Multi-pond aeration upgrade

Reference scope for retrofitting pond aeration on a solar-hybrid supply — oxygen demand established first, then equipment specified on kWh per kg O₂ delivered.

Sponsor, site and supplier identities are confidential. Scopes are illustrative; capacities and budgets are defined per project.

Pond aeration retrofit with solar photovoltaic supply and paddlewheel aerators — aquaculture energy procurement reference

Project scope

Oxygen demand basis from biomass, temperature and feed load
Aerator replacement specified on kg O₂/h at site conditions
Solar PV, inverter and battery sizing with grid/genset fallback
Metering and control so energy per kg of oxygen is verifiable

Highlights

Sizing before shoppingkWh per kg O₂ basisGrid & genset fallback

Procurement focus

Reference scope used to compare aeration and energy offers on installed cost plus modelled annual energy at the site tariff.

Additional project imagery

Inside the water scope

Multi-stage filtration trains inside the Solar-Hybrid Aeration Retrofit — Filtration trains

Oxygenation and degassing stages at the Solar-Hybrid Aeration Retrofit — Oxygenation & degassing

SCADA and regulatory compliance monitoring at the Solar-Hybrid Aeration Retrofit — SCADA & compliance monitoring

Illustrative process imagery. Site-specific photography is shared under NDA with shortlisted parties only.

Buyer journey · enquiry to RFQ

How this project moved from a first enquiry to a comparable RFQ

Every FishMatch project follows the same five stages. Nothing is sourced until a person has reviewed the brief, and supplier identities stay confidential until the buyer decides to engage.

01
Initial enquiry
The buyer described a water project in South Asia in a few lines — species or product, target output and site situation — without naming or contacting a single supplier.
Result · A confidential brief in the FishMatch desk, acknowledged the same day.
02
Brief review
FishMatch read the brief before any sourcing began, listed the missing decisions and separated what was fixed from what was still an assumption.
Result · An agreed project definition: system type, production model and the constraints that change equipment selection.
03
Sizing and numbers
Duty figures were established for the water scope — load, water treatment, aeration or oxygenation, flow and energy — so equipment was specified from numbers rather than catalogue models.
Result · A sizing basis every supplier quotes against, using the same assumptions.
04
Structured RFQ
The scope was split into lots (oxygen demand basis from biomass, temperature and feed load and the rest of the package) and issued as one RFQ with identical questions to each shortlisted manufacturer.
Result · Comparable offers on one sheet: scope, exclusions, lead time and commissioning support.
05
Review and handoff
Offers were normalised, deviations declared, and only then were introductions made manually — supplier identities were held by FishMatch throughout.
Result · Reference scope used to compare aeration and energy offers on installed cost plus modelled annual energy at the site tariff.

See the full buyer journey map Start a structured RFQ

Related reference projects

Indoor recirculating aquaculture system (RAS) salmon grow-out hall with biofiltration and oxygenation equipment for supplier-neutral aquaculture project procurement

RAS

Indoor RAS Salmon Facility

Northern Europe

Shrimp

Biofloc Vannamei Farm

Latin America

Sea Cage

Offshore HDPE Cage Cluster

Extruded Aquafeed Mill First-Time Developer — Indoor RAS Start-Up

Confidential enquiry

Planning a project like the Solar-Hybrid Aeration Retrofit?

Request a comparable planning package for a water project in South Asia or elsewhere. Your enquiry is handled under NDA — sponsor, site and supplier identities are never shared.

Typical response · 1 business day

Class-3 CAPEX / OPEX benchmark

3–5 project-matched suppliers

1. What equipment do you need? *

2. Type of farm *

3. Project type *

4. Farm size / capacity

5. Budget range

6. Timeline

Smart questions

Fish farm project details

Lets suppliers scope tanks, cages, aeration, feeders and water treatment for your species and site.

Target species *

Farm type *

Target annual production *

Water source

Grid & road access

Documents that help us quote faster

Optional — you can email them after or bring them to the first call. Uploads are private and encrypted.

Site photos or coordinates
Water analysis (DO, pH, temperature, ammonia)
Existing licenses / aquaculture permits
Business plan or feasibility summary (if available)

7. Location *

8. Anything specific? (optional)

Aquaculture project details (optional)

Tell suppliers what they need to quote accurately

The more complete your aquaculture project details are, the faster suitable partners can understand your request and respond with realistic options. Leave anything you do not know yet blank — nothing here is required.

SpeciesSystem typeProject location (region / city)Production targetWater sourceLand or water area availableCurrent project stageStocking density (if known)Feed and feeding system needsAeration / oxygen needsPumps and water flow needsMonitoring / IoT / automationFiltration and water treatmentSuppliers already contacted (if any)Interested in an introduction to financing partners?UrgencySite statusPower supply at sitePermits and licencesEffluent / discharge requirementsWhat you want quotedPreferred delivery termsAfter-sales expectationsCertification or standards requiredYour role in the decisionBudget statusTarget market for the harvest

9. Describe your project (optional)

Not sure what to write? Answer a few quick questions and we'll draft the brief for you.

10. Your contact details *

Confidential matching · Supplier-paid model · No obligation · Human-assisted sourcing

Or use the full RFQ builder ·Back to all case studies

Short answer

What is the fastest way to get quotes for Solar Hybrid Aeration Retrofit?

Submit one structured request for Solar Hybrid Aeration Retrofit. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:: One structured request, human-reviewed before any supplier outreach
Typical turnaround:: Depends on scope and site data; no turnaround is guaranteed
Confidentiality:: Supplier names are never exposed during evaluation
Cost to buyers:: No fee charged to the buyer

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ