調達Q&A一覧

調達担当者向けQ&A · サーモン養殖プロジェクト

サーモン養殖場の費用を左右する条件とRAS見積もりの比較方法は?

費用は養殖方式、生産量、スモルト調達、水処理・酸素供給、エネルギー価格、許認可で決まります。RASの比較では生産量、出荷重量、密度、水再利用率、エネルギー・酸素使用量をそろえ、防疫、監視、予備電源、試運転も含めます。水源、水温、電力、建屋の状況、調達範囲、工程も提示します。

サーモン養殖場の費用は何で決まりますか?

海面生簀、陸上流水式、RASのどの方式を採用するかに加え、目標生産量、スモルトの調達、水処理と酸素供給、エネルギー価格、許認可で決まります。サーモンの陸上RASは生産能力トン当たりのCAPEXが最も高い一方、海面の養殖適地に依存せずに生産できます。

サーモン向けRASの見積もりはどう比較すべきですか?

年間生産量、出荷重量、最大飼育密度、水の再利用率、kg当たりエネルギー使用量、酸素使用量をそろえた共通の生産計画で比較します。防疫対策、監視設備、予備電源、試運転も見積範囲に含めてください。

見積もりにはどのような情報が必要ですか?

目標生産量、スモルトの調達・生産方針、現地の水源と水温、利用可能な電力、建屋の状況、調達範囲、工程計画が必要です。FishMatchがこれらを共通の見積依頼書にまとめます。

養殖計画の参考指標

FishMatch Groupの計算ツールで使用する、計画策定用の世界共通の参考範囲です。最終的な数値は、サプライヤーの見積もりと現地データで確認してください。
指標数値前提・補足
CAPEX(設備投資額) — RAS(閉鎖循環式養殖)年間生産能力1トン当たりUSD 9,000–14,000国別のコスト係数を適用する前の世界共通の基準値。
CAPEX — 養殖池年間生産能力1トン当たりUSD 1,800–4,000遮水シートを施工した池または素掘り池。土地代は含みません。
CAPEX — 生簀年間生産能力1トン当たりUSD 2,500–5,500生簀、係留設備、網、作業用機器。
CAPEX — 流水式年間生産能力1トン当たりUSD 4,000–7,000レースウェイ水槽と取水工事。
エネルギー使用量RAS ~6 kWh/kg;養殖池 ~1.2;流水式 ~1.5;生簀 ~0.3魚の生産量kg当たり。
標準的なFCR(飼料要求率)トラウト 1.1;サーモン 1.2;エビ 1.4;ティラピア 1.6;コイ 1.8増重量kg当たりの飼料量kg。飼料や飼育管理によって変動します。
FishMatchが検討対象とする養殖プロジェクトの規模総事業費~USD 250,000から商業規模の魚類・エビ養殖プロジェクト。

Short answer

What is the fastest way to get quotes for Salmon Farm Cost?

Submit one structured request for Salmon Farm Cost. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for Salmon Farm Cost?

Submit one structured request for Salmon Farm Cost. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Start a reviewed RFQ