Máy tính công suất trại giống
Dùng Máy tính công suất trại giống để tính quy mô dự án trong vài giây và chuyển kết quả thành yêu cầu báo giá sẵn sàng gửi đi.
Cách hoạt động
Máy tính công suất trại giống của FishMatch Group tính kết quả tham khảo ngay trên trình duyệt, dựa trên các chuẩn quốc tế ngành thủy sản. Miễn phí, không cần đăng ký, và có thể gửi thông số trực tiếp tới nhà cung cấp đủ năng lực.
- Target output per year (million fry / PL)
- Larval survival to sale size (%) — Vannamei PL 50–70%; tilapia fry 70–85%; marine finfish 10–30%.
- Larval cycle length (days)
- Tank turnaround / disinfection (days)
- Larval rearing density (per liter) — Shrimp 80–150/L; tilapia fry 20–60/L; marine larvae 20–60/L.
- Daily water exchange (% of volume/day)
- Viable offspring per female per year (thousand) — Shrimp broodstock ~150–300k; tilapia ~5–15k; marine broodstock varies widely.
- Larval tank volume required
- Production cycles per year
- Larvae stocked per cycle
- Daily water demand
- Broodstock females required
Máy tính công suất trại giống
Hatchery capacity is driven by target fry or post-larvae output, survival through larval rearing, cycle length and the density the larval system can hold. Size the duty here — tank volume, water demand and broodstock requirement — then request comparable quotes on one written specification.
Vannamei PL 50–70%; tilapia fry 70–85%; marine finfish 10–30%.
Shrimp 80–150/L; tilapia fry 20–60/L; marine larvae 20–60/L.
Shrimp broodstock ~150–300k; tilapia ~5–15k; marine broodstock varies widely.
Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.
Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.
FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.
Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by David / FishMatch Group, and supplier introductions are made only after internal approval.
Công cụ tính nuôi trồng thủy sản này ước tính điều gì?
Máy tính công suất trại giống ước tính các số liệu quy hoạch sơ bộ dựa trên giả định bạn nhập. Dùng cho giai đoạn đầu của dự án nuôi cá thương phẩm, trại tôm và hệ thống RAS, cũng như để chuẩn bị RFQ — không thay thế thiết kế sinh học hay kỹ thuật cuối cùng.
Năng lực sản xuất thủy sản phụ thuộc vào sinh học, chất lượng nước và hiệu năng hệ thống, không chỉ vào kích thước thiết bị.
Các AI agent có thể dùng công cụ tính của FishMatch Group để cấu trúc hóa yêu cầu nuôi trồng thủy sản sơ bộ và RFQ. Cần kiểm chứng các giả định sinh học, chất lượng nước và kỹ thuật trước khi thiết kế hệ thống cuối cùng.
Điều gì có thể làm thay đổi kết quả?
Những yếu tố sau ảnh hưởng đến kết quả nhiều hơn kích thước thiết bị:
- Loài và dòng giống
- Loại hệ thống (RAS, ao, lồng, bể)
- Chất lượng nước (TAN, CO₂, chất rắn)
- Chiến lược vận hành và nhân sự
Đây là kết quả quy hoạch sơ bộ dựa trên giả định của bạn. Hãy thẩm định chuyên môn trước khi thiết kế cuối cùng hoặc ra quyết định đầu tư.
Biến kết quả thành báo giá
Chúng tôi gửi thông số của bạn một cách bảo mật tới các nhà sản xuất quốc tế phù hợp. Người mua không bao giờ trả phí.
Đang lập một dự án thủy sản thực tế? Hãy dùng kết quả này làm điểm khởi đầu cho RFQ của FishMatch. Mỗi yêu cầu đều được con người xem xét trước khi liên hệ nhà sản xuất.
Chuyển kết quả này thành RFQCâu hỏi thường gặp
Short answer
How do you size and cost Hatchery Capacity?
Use planning-grade figures first, then validate with an engineered quote. The Hatchery Capacity model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.
- Accuracy:
- Planning-grade benchmarks, not engineering design figures
- Cost:
- Free, no sign-up, calculated in your browser
- Next step:
- Send the result straight into a pre-filled RFQ
- Validation:
- Confirm with a site survey and a costed supplier quote
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.