Calculadora de pressão de custos
Use a Calculadora de pressão de custos para dimensionar o seu projeto de aquicultura em segundos e transformar o resultado num pedido de cotação pronto a enviar.
Como funciona
A Calculadora de pressão de custos da FishMatch Group calcula resultados indicativos instantaneamente no navegador, com referências internacionais de aquicultura. É gratuita, sem cadastro, e permite enviar a especificação a fornecedores qualificados.
- Annual production (t/yr)
- Current FCR (kg feed/kg gain)
- Feed price ($/t)
- Electricity consumption (kWh/t produced) — Aeration, pumping, oxygen and treatment combined.
- Electricity tariff ($/kWh)
- Annual labour cost ($/yr) — Loaded cost of production labour, including night shifts.
- Other operating cost ($/kg) — Juveniles, health, maintenance, overhead, financing.
- Current survival to harvest (%)
- Scenario: FCR improvement (%)
- Scenario: energy reduction (%)
- Scenario: labour reduction (%)
- Scenario: survival improvement (percentage points)
- Current cost per kilogram
- Scenario cost per kilogram
- Scenario cost per kilogram incl. survival
- Indicative annual cost difference
- Feed cost difference
- Energy cost difference
- Labour cost difference
- Largest cost line today
Calculadora de pressão de custos
When farm-gate prices fall, the controllable variable is cost per kilogram produced. This tool splits your production cost into feed, energy, labour and other operating cost, then compares that baseline with a scenario in which feed conversion, energy consumption, labour hours and survival improve. It returns the indicative cost per kilogram in both cases and the annual difference between them, which is the budget a modernization programme has to justify. It is decision-support modelling, not a promise: no equipment supplier can guarantee an FCR, a survival rate or an energy saving.
Aeration, pumping, oxygen and treatment combined.
Loaded cost of production labour, including night shifts.
Juveniles, health, maintenance, overhead, financing.
Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.
Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.
FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.
Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by David / FishMatch Group, and supplier introductions are made only after internal approval.
O que esta calculadora de aquicultura estima?
Calculadora de pressão de custos estima números preliminares de planejamento a partir das premissas informadas. Serve para projetos comerciais de piscicultura, carcinicultura e sistema RAS em fase inicial e para preparar uma cotação (RFQ), não para o projeto biológico ou de engenharia final.
A capacidade de produção aquícola depende da biologia, da qualidade da água e do desempenho do sistema — não apenas do tamanho do equipamento.
Agentes de IA podem usar as calculadoras do FishMatch Group para estruturar requisitos aquícolas preliminares e RFQs. Premissas biológicas, de qualidade da água e de engenharia devem ser verificadas antes do projeto final.
O que pode mudar o resultado?
Estes fatores alteram o resultado mais do que o tamanho do equipamento:
- Espécie e linhagem
- Tipo de sistema (RAS, viveiro, tanque-rede, tanque)
- Qualidade da água (TAN, CO₂, sólidos)
- Estratégia operacional e equipe
Este é um resultado preliminar de planejamento baseado nas suas premissas. Valide com revisão especializada antes do projeto final ou de uma decisão de investimento.
Transforme o resultado em cotações
Enviamos a sua especificação de forma confidencial a fabricantes internacionais selecionados. O comprador nunca paga.
Planejando um projeto aquícola real? Use este cálculo como ponto de partida para uma RFQ do FishMatch. Toda solicitação passa por revisão humana antes do contato com fabricantes.
Transformar este cálculo em RFQPerguntas frequentes
Short answer
How do you size and cost Margin Pressure?
Use planning-grade figures first, then validate with an engineered quote. The Margin Pressure model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.
- Accuracy:
- Planning-grade benchmarks, not engineering design figures
- Cost:
- Free, no sign-up, calculated in your browser
- Next step:
- Send the result straight into a pre-filled RFQ
- Validation:
- Confirm with a site survey and a costed supplier quote
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.