FishMatchGroup
Sign in
Back to home
← 모든 RAS 가이드

순환 여과 양식 시스템(RAS)에서의 어류 복지

빠른 답변

RAS에서의 좋은 어류 복지는 안정적인 수질, 적절한 사육 밀도, 부드러운 취급 및 선별, 적절한 조명 및 유속, 지속적인 모니터링 및 인도적인 도살에서 비롯됩니다. 복지는 또한 성장을 촉진하고 질병을 줄입니다.

수질

산소, 이산화탄소, 암모니아, 아질산염, 온도 및 pH는 어종 범위 내에 유지되어야 합니다. RAS는 모니터링 및 경보가 잘 작동할 때 엄격한 제어를 가능하게 합니다.

밀도, 유량 및 조명

  • 어종에 적합한 사육 밀도
  • 자연스러운 유영을 가능하게 하는 수류
  • 스트레스를 피하는 조명 계획
  • 낮은 소음 및 진동

취급 및 수확

  • 부상을 줄이도록 설계된 펌프 및 선별기
  • 물 밖에서 최소한의 시간
  • 도살 전 기절

인증

구매자와 소매업자는 ASC 또는 BAP와 같은 인증을 점점 더 요구하고 있습니다. 처음부터 복지 및 추적성 기록을 계획하십시오.

자주 묻는 질문

RAS 프로젝트를 계획 중이신가요?

한 번의 요청으로 저희 팀이 적합하고 검증된 RAS 공급업체를 엄선하고 비교 가능한 견적을 준비해 드립니다. 자동화된 시장이 아닌 사람이 검토합니다.

프로젝트 요청서 제출RAS 비용 추정

관련 RAS 가이드

Short answer

How do you build and equip a project for Fish Welfare In RAS?

Feasibility in Fish Welfare In RAS is decided by water, energy, permitting and logistics before equipment choice. FishMatch Group benchmarks the local cost base, matches the system type to site conditions, and sources equipment and turn-key scopes from international suppliers who already ship and commission in the region — with landed cost, duties and lead time included in the comparison.

What decides feasibility:
Water availability, energy cost, permitting and route to market
Sourcing:
International suppliers with regional shipping and commissioning experience
Landed cost:
Quotations include freight, duties and installation assumptions
Cost to buyers:
No fee charged to the buyer
How do you build and equip a project for Fish Welfare In RAS?

Feasibility in Fish Welfare In RAS is decided by water, energy, permitting and logistics before equipment choice. FishMatch Group benchmarks the local cost base, matches the system type to site conditions, and sources equipment and turn-key scopes from international suppliers who already ship and commission in the region — with landed cost, duties and lead time included in the comparison.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ