공급업체 지식 · Biofilter Suppliers
Biofilter Suppliers for RAS — Buyer's Knowledge Page
The biofilter is the nitrifying heart of a RAS. Under-size it and biology destabilises; over-size it and CAPEX and pumping energy skyrocket. Buyer's job: define TAN removal rate needed (from mass-balance) and let vendors propose media and geometry.
FishMatch Group은 공급업체 중립입니다. 교육 콘텐츠 — 법률 자문이나 공급업체 순위가 아닙니다.
일반적인 응용
- Fresh, brackish and full-salinity RAS
- Nursery, grow-out, broodstock loops
- Post-smolt salmon and marine finfish
프로젝트 규모
- Small: 10–50 kg TAN/day removal
- Mid: 50–500 kg TAN/day
- Large: 500–5,000+ kg TAN/day
선정 기준
- Guaranteed volumetric TAN removal at your temperature and salinity
- Media specific surface area (m²/m³) and clogging behaviour
- Hydraulic residence time and back-mixing
- Head loss and pumping energy
- Start-up curve and inoculation protocol
구매자가 물어야 할 질문
- What is guaranteed VTR (g TAN / m³ media / day) at 15°C / 20°C / 25°C?
- What is the biofilter's contribution to total specific energy?
- How is media replaced and how often?
일반적인 조달 실수
- Trusting media catalog VTR without temperature correction
- Ignoring salinity effects on nitrification kinetics
- Under-sizing degassing after the biofilter
RFQ 권장사항
- Tender against a required TAN removal load, not a media type
- Ask for kinetic model and CFD if project is large
관련 도구 및 가이드
계산기
Buyer's Guides
프로젝트 템플릿
자주 묻는 질문
다음 단계
이 지식을 금융 가능한 프로젝트로 전환.
Tailored RFQ Checklist
Get the RFQ checklist for “Biofilter Suppliers”
Leave your details and we’ll route you straight into the RFQ Builder with a checklist pre-filled for this topic. Prefer WhatsApp? The same brief opens in one tap.