Conocimiento de proveedores · Biofilter Suppliers
Biofilter Suppliers for RAS — Buyer's Knowledge Page
The biofilter is the nitrifying heart of a RAS. Under-size it and biology destabilises; over-size it and CAPEX and pumping energy skyrocket. Buyer's job: define TAN removal rate needed (from mass-balance) and let vendors propose media and geometry.
FishMatch Group es neutral. Contenido educativo — no es asesoría legal, no es ranking.
Aplicaciones típicas
- Fresh, brackish and full-salinity RAS
- Nursery, grow-out, broodstock loops
- Post-smolt salmon and marine finfish
Tamaños de proyecto
- Small: 10–50 kg TAN/day removal
- Mid: 50–500 kg TAN/day
- Large: 500–5,000+ kg TAN/day
Criterios de selección
- Guaranteed volumetric TAN removal at your temperature and salinity
- Media specific surface area (m²/m³) and clogging behaviour
- Hydraulic residence time and back-mixing
- Head loss and pumping energy
- Start-up curve and inoculation protocol
Preguntas del comprador
- What is guaranteed VTR (g TAN / m³ media / day) at 15°C / 20°C / 25°C?
- What is the biofilter's contribution to total specific energy?
- How is media replaced and how often?
Errores comunes de compra
- Trusting media catalog VTR without temperature correction
- Ignoring salinity effects on nitrification kinetics
- Under-sizing degassing after the biofilter
Recomendaciones RFQ
- Tender against a required TAN removal load, not a media type
- Ask for kinetic model and CFD if project is large
Herramientas y guías relacionadas
Calculadoras
Buyer's Guides
Plantillas de proyecto
Regulación y estándares
Preguntas frecuentes
Próximos pasos
Convierta el conocimiento en un proyecto bancable.
Tailored RFQ Checklist
Get the RFQ checklist for “Biofilter Suppliers”
Leave your details and we’ll route you straight into the RFQ Builder with a checklist pre-filled for this topic. Prefer WhatsApp? The same brief opens in one tap.