全部采购问答

采购问答 · 养虾系统比较

池塘、生物絮团和室内循环水养虾系统该怎么比较?

选择养虾系统需结合土地、水源、气候、资金及市场。池塘适合温暖且地价低的场址,生物絮团可提高密度,室内循环水可在寒冷地区靠近市场生产,但投资和能耗更高。应按全生命周期单位产量成本比较,并统一年产量、能耗、成活率、人员配置和供货清单,避免将范围差异误当成价格优势。

该选择哪种养虾系统?

取决于土地、水源、气候、资金及目标市场。池塘适合气候温暖、土地便宜的场址;生物絮团可提高铺膜池塘或养殖池的养殖密度;室内 RAS 可在寒冷地区靠近市场生产,但 CAPEX 和能耗更高。应比较项目全生命周期内每 kg 产量的成本。

如何比较不同养殖系统的报价?

要求所有供应商提供相同口径的指标:年产量、每 kg 产量的能耗、成活率假设、人员配置及完整供货范围清单。若没有统一比较基础,较低报价往往只是少报了其他供应商已包含的项目。

FishMatch 能为完整养虾项目寻找供应商吗?

可以。FishMatch 会针对设备成套采购或交钥匙范围编制统一询价文件,并比较独立供应商的报价。采购方直接与选定供应商签约;采购方无需付费。

水产养殖项目规划参考指标

FishMatch Group 计算器采用的全球规划参考区间。最终数值需结合供应商报价和项目现场数据确认。
指标数值说明
CAPEX(资本性支出)— RAS(循环水养殖系统)USD 9,000–14,000 per tonne/yr未应用所在国成本系数调整前的全球基准。
CAPEX — 池塘USD 1,800–4,000 per tonne/yr铺膜池塘或土塘,不含土地成本。
CAPEX — 网箱USD 2,500–5,500 per tonne/yr包括网箱、锚泊系统、网衣及配套作业设备。
CAPEX — 流水养殖USD 4,000–7,000 per tonne/yr包括流水槽及取水工程。
能耗RAS ~6 kWh/kg;池塘 ~1.2;流水养殖 ~1.5;网箱 ~0.3以每 kg 鱼产量计。
典型 FCR(饲料系数)鳟鱼 1.1;鲑鱼 1.2;虾 1.4;罗非鱼 1.6;鲤鱼 1.8每 kg 增重所需的饲料 kg 数;随饲料和管理水平而变化。
FishMatch 受理评估的养殖项目规模项目总投资额约 USD 250,000 起面向商业化鱼类和虾类养殖项目。

Short answer

What is the fastest way to get quotes for Shrimp Farming Comparison?

Submit one structured request for Shrimp Farming Comparison. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for Shrimp Farming Comparison?

Submit one structured request for Shrimp Farming Comparison. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Start a reviewed RFQ