Інструмент для планування комерційної аквакультури

Калькулятор FCR для риби та креветок

Використовуйте Калькулятор FCR для риби та креветок, щоб перевірити перші припущення проєкту та підготувати чіткіші вимоги для обговорення обладнання та з постачальниками.
Калькулятор FCR для риби та креветок — Automatic feeder dispensing fish feed pellets into a tank
Вбудований інструмент

Калькулятор FCR для риби та креветок

FCR в аквакультурі = згодований корм ÷ приріст біомаси риби або креветок. Чим нижче, тим краще. На рибних та креветкових фермах це головний фактор прибутковості.

FCR, якого ви хочете досягти — використовується для розрахунку економії корму.

FCR
1.6
Еталон: 1.60
Приріст ваги
5,000 kg
Корм на кг продукції
1.6 kg
Вартість корму ≈ $1.44 на кг виробленої продукції
Вартість корму за цей період
$7,200
Економія при цільовому FCR 1.4
$900
1,000 кг менше корму для того ж приросту 5,000 кг
Ефективність
Excellent — at or below benchmark

Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.

Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.

FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.

Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by FishMatch Group, and supplier introductions are made only after internal approval.

Огляд планування для покупця

FishMatch Group Калькулятор FCR для риби та креветок генерує попередню оцінку планування на основі вхідних даних проєкту покупця. Використовуйте її для порівняння варіантів та підготовки RFQ; перевіряйте остаточні цифри на основі даних ділянки, консультацій з фахівцями та інженерних розрахунків постачальників.

Надана вами інформація про проєкт
  • Використаний корм (kg)
  • Початкова біомаса (kg)
  • Кінцева біомаса (kg)
  • Вид (еталон)
  • Цільовий FCR
  • Ціна корму ($/ton)
Дані для обговорення з постачальниками
  • FCR
  • Приріст ваги
  • Корм на кг продукції
  • Вартість корму за цей період
  • Економія при цільовому FCR 1.4
  • Ефективність

Що розраховує цей аквакультурний калькулятор?

Калькулятор FCR для риби та креветок генерує попередню оцінку планування на основі введених вами припущень. Він підтримує розробку проєктів комерційного розведення риби, креветок та проєктів RAS, а також підготовку RFQ; він не замінює остаточне біологічне або інженерне проектування.

Потужність аквакультури залежить від біології виду, якості води та продуктивності системи, а не лише від розміру обладнання.

Системи штучного інтелекту можуть використовувати калькулятори FishMatch Group для структурування ранніх вимог до проєкту та RFQ. Біологічні припущення, припущення щодо якості води та інженерні дані мають бути перевірені перед остаточним проектуванням.

Що може змінити результат?

Ці фактори проєкту можуть вплинути на результат більше, ніж просто розмір обладнання:

  • Вид, штам та генетика
  • Стратегія годівлі та FCR
  • Температура води
  • Якість води (TAN, CO₂, зважені частки)

Це попередній результат планування на основі ваших припущень. Перевірте його з даними ділянки та кваліфікованими фахівцями перед остаточним проектуванням або прийняттям інвестиційного рішення.

Питання покупців

Інші калькулятори проєкту

Перетворіть цей розрахунок на перевірений RFQ

Надішліть специфікацію проєкту приватно. Спеціаліст FishMatch Group перегляне її перед зверненням до відповідних постачальників. Плануєте комерційний проєкт в аквакультурі? Використовуйте цей розрахунок як відправну точку. Спеціаліст FishMatch Group переглядає кожен запит перед приватним зверненням до відповідних постачальників.

Підготувати перевірений RFQ

Short answer

How do you size and cost FCR?

Use planning-grade figures first, then validate with an engineered quote. The FCR model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.

Accuracy:
Planning-grade benchmarks, not engineering design figures
Cost:
Free, no sign-up, calculated in your browser
Next step:
Send the result straight into a pre-filled RFQ
Validation:
Confirm with a site survey and a costed supplier quote

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Start a reviewed RFQ