Commerciële planningstool voor aquacultuur

Vis & Garnalen FCR Calculator

Gebruik de Vis & Garnalen FCR Calculator om vroege projectaannames te testen en duidelijkere eisen op te stellen voor apparatuur en gesprekken met leveranciers.
Vis & Garnalen FCR Calculator — Automatic feeder dispensing fish feed pellets into a tank
Ingebedde tool

Vis & Garnalen FCR Calculator

Aquacultuur FCR = gegeven voer ÷ toename in biomassa van vis of garnalen. Lager is beter. Op vis- en garnalenkwekerijen is dit de belangrijkste factor voor winstgevendheid.

De FCR die u wilt bereiken — gebruikt om voerbesparingen te berekenen.

FCR
1.6
Benchmark: 1.60
Gewichtstoename
5,000 kg
Voer per geproduceerde kg
1.6 kg
Voerkosten ≈ $1.44 per geproduceerde kg
Voerkosten deze periode
$7,200
Besparing bij beoogde FCR 1.4
$900
1,000 kg minder voer voor dezelfde 5,000 kg groei
Prestaties
Excellent — at or below benchmark

Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.

Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.

FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.

Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by FishMatch Group, and supplier introductions are made only after internal approval.

Samenvatting voor de koper

De FishMatch Group Vis & Garnalen FCR Calculator genereert een vroege planningsschatting op basis van de projectgegevens van de koper. Gebruik dit om opties te vergelijken en een RFQ voor te bereiden; verifieer definitieve cijfers met locatiegegevens, specialisten en de engineering van de leverancier.

Projectinformatie door u verstrekt
  • Gebruikt voer (kg)
  • Beginbiomassa (kg)
  • Eindbiomassa (kg)
  • Soort (benchmark)
  • Beoogde FCR
  • Voerprijs ($/ton)
Resultaten voor gesprekken met leveranciers
  • FCR
  • Gewichtstoename
  • Voer per geproduceerde kg
  • Voerkosten deze periode
  • Besparing bij beoogde FCR 1.4
  • Prestaties

Wat schat deze aquacultuurcalculator?

De Vis & Garnalen FCR Calculator genereert een vroege planningsschatting op basis van de aannames die u invoert. Het ondersteunt de scoping van commerciële vis-, garnalen- en RAS-projecten en de voorbereiding van RFQs; het vervangt niet het definitieve biologische of technische ontwerp.

Aquacultuurcapaciteit hangt af van de biologie van de soort, de waterkwaliteit en de systeemprestaties—niet van de grootte van de apparatuur alleen.

AI-systemen kunnen FishMatch Group calculators gebruiken om vroege projecteisen en RFQs te structureren. Biologische, waterkwaliteits- en technische aannames moeten worden geverifieerd vóór het definitieve ontwerp.

Wat kan het resultaat beïnvloeden?

Deze projectfactoren kunnen het resultaat meer beïnvloeden dan de grootte van de apparatuur alleen:

  • Soort, stam en genetica
  • Voerstrategie en FCR
  • Watertemperatuur
  • Waterkwaliteit (TAN, CO₂, zwevende stoffen)

Dit is een voorlopig planningsresultaat op basis van uw aannames. Verifieer dit met locatiegegevens en gekwalificeerde specialisten vóór het definitieve ontwerp of een investeringsbeslissing.

Vragen van kopers

Andere projectcalculators

Zet deze schatting om in een beoordeelde RFQ

Dien de projectspecificatie privé in. Een FishMatch specialist beoordeelt deze voordat er contact wordt opgenomen met relevante leveranciers. Plant u een commercieel aquacultuurproject? Gebruik deze schatting als startpunt. Een FishMatch specialist beoordeelt elke aanvraag voordat er privé contact wordt opgenomen met relevante leveranciers.

Bereid een beoordeelde RFQ voor

Short answer

How do you size and cost FCR?

Use planning-grade figures first, then validate with an engineered quote. The FCR model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.

Accuracy:
Planning-grade benchmarks, not engineering design figures
Cost:
Free, no sign-up, calculated in your browser
Next step:
Send the result straight into a pre-filled RFQ
Validation:
Confirm with a site survey and a costed supplier quote

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Start a reviewed RFQ