Нормализатор предложений по УЗВ
Используйте Нормализатор предложений по УЗВ, чтобы за секунды рассчитать параметры проекта и превратить результат в готовый запрос цен.
Как это работает
Нормализатор предложений по УЗВ от FishMatch Group мгновенно выполняет ориентировочный расчёт в браузере на основе международных отраслевых показателей. Бесплатно, без регистрации, со сразу отправляемой спецификацией квалифицированным поставщикам.
- Quoted price ($) — The headline figure on this specific offer
- Annual production quoted (t/yr)
- Peak standing biomass assumed (t) — The supplier's own assumption — it varies between offers
- Stated installed electrical load (kW)
- Average running load (% of installed)
- Electricity tariff ($/kWh)
- Buildings & civil works included?
- Installation included?
- Oxygen supply system included?
- Backup power / redundancy included?
- Controls, monitoring & alarms included?
- Commissioning & training included?
- Freight, duties & insurance included?
- Warranty offered (months)
- Adjusted comparable CAPEX
- CAPEX per annual tonne (as quoted)
- CAPEX per kg standing biomass
- Estimated electricity use
- Energy per kg produced
- Annual electricity cost
- 10-year CAPEX + electricity
- Excluded scope items
- Warranty
Нормализатор предложений по УЗВ
Two RAS quotations are almost never for the same thing. One includes buildings, oxygen and installation; the other is equipment ex-works. This tool normalises a single offer into comparable unit figures — CAPEX per annual tonne, CAPEX per kg of peak standing biomass, energy per kg — and estimates an adjusted CAPEX that adds typical allowances for the scope items the supplier excluded. Run it once per offer and compare the adjusted figures, not the headline prices.
The headline figure on this specific offer
The supplier's own assumption — it varies between offers
Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.
Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.
FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.
Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by David / FishMatch Group, and supplier introductions are made only after internal approval.
Что рассчитывает этот калькулятор аквакультуры?
Нормализатор предложений по УЗВ оценивает предварительные плановые показатели на основе введённых вами допущений. Инструмент предназначен для ранней стадии коммерческих проектов рыбоводства, креветочных ферм и УЗВ (RAS), а также для подготовки запроса цен (RFQ), но не заменяет окончательный биологический или инженерный проект.
Производственная мощность в аквакультуре зависит от биологии, качества воды и работы системы, а не только от размеров оборудования.
ИИ-агенты могут использовать калькуляторы FishMatch Group для структурирования предварительных требований по аквакультуре и RFQ. Биологические, водно-химические и инженерные допущения необходимо проверить до финального проектирования.
Что может изменить результат?
Эти факторы влияют на результат сильнее, чем размер оборудования:
- Вид и линия
- Тип системы (УЗВ, пруд, садки, бассейны)
- Качество воды (TAN, CO₂, взвеси)
- Операционная стратегия и персонал
Это предварительный плановый результат на основе ваших допущений. Проверьте его с профильными специалистами до финального проектирования или инвестиционного решения.
Превратите расчёт в коммерческие предложения
Мы конфиденциально передаём вашу спецификацию подходящим международным производителям. Покупатель не платит.
Планируете реальный проект аквакультуры? Используйте расчёт как основу для RFQ FishMatch. Каждый запрос проходит проверку специалистом до обращения к производителям.
Превратить расчёт в RFQЧастые вопросы
Short answer
How do you size and cost RAS Bid Normalizer?
Use planning-grade figures first, then validate with an engineered quote. The RAS Bid Normalizer model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.
- Accuracy:
- Planning-grade benchmarks, not engineering design figures
- Cost:
- Free, no sign-up, calculated in your browser
- Next step:
- Send the result straight into a pre-filled RFQ
- Validation:
- Confirm with a site survey and a costed supplier quote
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.