FishMatchGroup
Sign in
Back to home
← 모든 RAS 가이드

RAS의 중복성 및 백업 시스템

빠른 답변

모든 상업용 RAS는 단 몇 분 만에 어류를 폐사시킬 수 있는 시스템에 대한 백업이 필요합니다: 전력(자동 전환 발전기), 비상 산소, 이중 펌프 및 블로어, 산소, 수위 및 온도에 대한 연중무휴 알람 시스템.

중복성이 중요한 이유

RAS에서 어류는 기계에 전적으로 의존합니다. 정전이나 펌프 정지는 높은 사육 밀도에서 짧은 시간 내에 산소 농도를 치사 수준으로 떨어뜨릴 수 있습니다. 백업 시스템은 추가 비용이 아닌 보험입니다.

최소 백업 목록

  • 주요 부하를 위한 예비 발전기(자동 전환 기능 포함)
  • 자동 디퓨저가 장착된 액체 또는 병에 담긴 비상 산소
  • 핵심 회로에 N+1 펌프 및 블로어
  • 하나의 고장이 전체 양식장에 영향을 미치지 않도록 분리된 생산 단위
  • 산소, 수위, 온도 및 전력에 대한 전화 및 SMS 알람
  • 핵심 장비에 대한 현장 예비 부품

공급업체 견적 확인 방법

각 공급업체에게 중복되는 장비 목록, 정전 시 양식장이 버틸 수 있는 기간, 알람 전달 방식을 정확히 명시하도록 요청하십시오. 이 항목들을 범위에 포함시켜 가격을 낮추기 위해 삭제될 수 없도록 하십시오.

자주 묻는 질문

RAS 프로젝트를 계획 중이신가요?

한 번의 요청으로 저희 팀이 적합하고 검증된 RAS 공급업체를 엄선하고 비교 가능한 견적을 준비해 드립니다. 자동화된 시장이 아닌 사람이 검토합니다.

프로젝트 요청서 제출RAS 비용 추정

관련 RAS 가이드

Short answer

What is the fastest way to get quotes for RAS Redundancy And Backup Systems?

Submit one structured request for RAS Redundancy And Backup Systems. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for RAS Redundancy And Backup Systems?

Submit one structured request for RAS Redundancy And Backup Systems. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ