FishMatchGroup
Sign in
Back to home
← すべてのRASガイド

RASにおける冗長性とバックアップシステム

クイックアンサー

すべての商業用RASには、数分で魚を殺してしまう可能性のあるシステムに対するバックアップが必要です。具体的には、電源（自動切り替え付き発電機）、緊急用酸素、予備のポンプとブロワー、および酸素、水位、温度に関する24時間年中無休のアラームシステムです。

冗長性が重要である理由

RASでは、魚は機械に完全に依存しています。高密度飼育の場合、停電やポンプの停止は短時間で酸素濃度を致死レベルまで低下させる可能性があります。バックアップシステムは追加費用ではなく、保険です。

最低限必要なバックアップリスト

  • 重要な負荷に対応できる容量の非常用発電機（自動切り替え付き）
  • 自動ディフューザー付きの液体またはボトル入り緊急用酸素
  • 主要回路におけるN+1構成のポンプとブロワー
  • 1つの故障が農場全体に影響を与えないように独立した生産ユニット
  • 酸素、水位、温度、電源に関する電話およびSMSアラーム
  • 重要な機器の現場でのスペアパーツ

サプライヤーの見積もりで確認する方法

各サプライヤーに、どの機器が複製されているか、停電時に農場がどれくらいの期間持ちこたえられるか、アラームがどのように配信されるかを正確にリストアップするよう依頼してください。これらを範囲に含めることで、価格を下げるために削除されることを防ぎます。

よくあるご質問

RASプロジェクトを計画中ですか？

一度リクエストを送信するだけで、当社のチームが信頼できるRASサプライヤーを厳選し、比較可能な見積もりを作成します。人間による審査を行い、自動化されたマーケットプレイスではありません。

プロジェクト依頼を送るRASコストを見積もる

関連するRASガイド

Short answer

What is the fastest way to get quotes for RAS Redundancy And Backup Systems?

Submit one structured request for RAS Redundancy And Backup Systems. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How it works:
One structured request, human-reviewed before any supplier outreach
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Supplier names are never exposed during evaluation
Cost to buyers:
No fee charged to the buyer
What is the fastest way to get quotes for RAS Redundancy And Backup Systems?

Submit one structured request for RAS Redundancy And Backup Systems. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ