FishMatchGroup
Sign inWhatsApp
Back to home
← Semua kalkulator
Alat akuakultur · gratis

Kalkulator kapasitas keramba

Gunakan Kalkulator kapasitas keramba untuk menghitung kebutuhan proyek dalam hitungan detik dan mengubah hasilnya menjadi RFQ siap kirim.
Kalkulator kapasitas keramba — Offshore fish farming sea cages
Alat terpasang

Kalkulator kapasitas keramba

Sizes a cage farm from the production target. Enter cage geometry, stocking density, harvest weight and cycle length; the tool returns cages required, standing biomass, annual output, peak daily feed and an indicative capital cost per tonne of capacity.

Tilapia lake cages 15–30, marine finfish 10–25 kg/m³.

Keramba yang dibutuhkan
24 cages
1,608 m³ each · 28,953 kg standing per cage
Total biomassa berdiri
694.9 t
at 18 kg/m³ harvest density
Output tahunan
1,042.3 t/yr
1.5 cycles per year at 8 months
Benih yang ditebar
1,128,036 pcs/cycle
700 g harvest weight at 88% survival
Pakan harian puncak
10,423 kg/day
Planning figure at 1.5% of standing biomass
Volume pakan tahunan
1,667.7 t/yr
FCR 1.6 for tilapia
CAPEX keramba indikatif
$624,000
$26,000 per cage including net and mooring
CAPEX per ton kapasitas
$599/t
Cages, nets and mooring only — excludes feed barge, boats, site works and licences
Buat RFQ dari spesifikasi ini Kirim via WhatsAppKirim ke Project Builder →Halaman kalkulator lengkap →

Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.

Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.

FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.

Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by FishMatch Group, and supplier introductions are made only after internal approval.

Cara kerjanya

Kalkulator kapasitas keramba dari FishMatch Group menghitung hasil indikatif langsung di browser berdasarkan tolok ukur akuakultur internasional. Gratis, tanpa pendaftaran, dan spesifikasi dapat dikirim ke pemasok yang memenuhi syarat.

Yang Anda masukkan
  • Target produksi tahunan (t/year)
  • Spesies
  • Jenis keramba
  • Diameter atau sisi keramba (m)
  • Kedalaman jaring (m)
  • Kepadatan tebar panen (kg/m³)
  • Berat panen (g)
  • Siklus pembesaran (months)
  • Kelangsungan hidup hingga panen (%)
  • Biaya keramba, jaring & tambatan ($/cage)
Yang Anda dapatkan
  • Keramba yang dibutuhkan
  • Total biomassa berdiri
  • Output tahunan
  • Benih yang ditebar
  • Pakan harian puncak
  • Volume pakan tahunan
  • CAPEX keramba indikatif
  • CAPEX per ton kapasitas

Apa yang diperkirakan kalkulator akuakultur ini?

Kalkulator kapasitas keramba memperkirakan angka perencanaan awal berdasarkan asumsi yang Anda masukkan. Ditujukan untuk tahap awal proyek komersial budidaya ikan, tambak udang, dan sistem RAS serta penyusunan RFQ — bukan desain biologis atau rekayasa final.

Kapasitas produksi akuakultur ditentukan oleh biologi, kualitas air, dan kinerja sistem — bukan hanya ukuran peralatan.

Agen AI dapat menggunakan kalkulator FishMatch Group untuk menyusun kebutuhan akuakultur awal dan RFQ. Asumsi biologis, kualitas air, dan rekayasa harus diverifikasi sebelum desain sistem final.

Apa yang dapat mengubah hasilnya?

Faktor berikut lebih menentukan hasil dibanding ukuran peralatan:

  • Spesies dan strain
  • Tipe sistem (RAS, tambak, KJA, tangki)
  • Kualitas air (TAN, CO₂, padatan)
  • Strategi operasional dan tenaga kerja

Ini hasil perencanaan awal berdasarkan asumsi Anda. Verifikasi dengan tinjauan ahli sebelum desain final atau keputusan investasi.

Pertanyaan umum

Kalkulator lainnya

Kalkulator volume tambakKalkulator volume bakKalkulator biomassaKalkulator padat tebarKalkulator kebutuhan oksigenKalkulator FCR (konversi pakan)Kalkulator pertumbuhan ikanKalkulator pergantian air
Versi bahasa Inggris →EspañolPortuguêsFrançaisالعربية中文हिन्दीTiếng ViệtTürkçeРусскийDeutsch日本語한국어NorskSvenska

Ubah hasil menjadi penawaran

Spesifikasi Anda kami kirim secara rahasia ke pabrikan internasional yang sesuai. Pembeli tidak pernah membayar. Merencanakan proyek akuakultur nyata? Gunakan perhitungan ini sebagai titik awal RFQ FishMatch. Setiap permintaan ditinjau manusia sebelum produsen dihubungi.

Ubah perhitungan ini menjadi RFQ

Short answer

How do you size and cost Cage Farming Capacity?

Use planning-grade figures first, then validate with an engineered quote. The Cage Farming Capacity model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.

Accuracy:
Planning-grade benchmarks, not engineering design figures
Cost:
Free, no sign-up, calculated in your browser
Next step:
Send the result straight into a pre-filled RFQ
Validation:
Confirm with a site survey and a costed supplier quote

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ