FishMatchGroup
Sign inWhatsApp
Back to home
← 所有计算器
商业水产养殖规划工具

网箱养殖容量计算器

使用 网箱养殖容量计算器 测试早期项目假设，并为设备及供应商洽谈准备更明确的需求。
网箱养殖容量计算器 — Offshore fish farming sea cages
内嵌工具

网箱养殖容量计算器

Sizes a cage farm from the production target. Enter cage geometry, stocking density, harvest weight and cycle length; the tool returns cages required, standing biomass, annual output, peak daily feed and an indicative capital cost per tonne of capacity.

罗非鱼湖泊网箱 15–30, 海水鱼类 10–25 kg/m³。

所需网箱数量
24 cages
每个 1,608 立方米 · 每个网箱 28,953 公斤存栏量
总现存生物量
694.9 t
收获密度为 18 kg/m³
年产出
1,042.3 t/yr
每年 1.5 个周期，每个周期 8 个月
需放养幼鱼数
1,128,036 pcs/cycle
收获重量 700 克，存活率 88%
日投喂峰值
10,423 kg/day
规划数字为存塘生物量的 1.5%
年饲料总量
1,667.7 t/yr
FCR 1.6 for tilapia
参考网箱资本支出 (CAPEX)
$624,000
$26,000 per cage including net and mooring
单位产能资本支出 (CAPEX)（每吨）
$599/t
仅含网箱、网衣和系泊设施 — 不含饲料驳船、船只、场地工程及许可证
按此参数生成询价单 通过 WhatsApp 发送发送到项目构建器 →查看完整计算器页面 →

Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.

Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.

FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.

Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by FishMatch Group, and supplier introductions are made only after internal approval.

买家规划摘要

FishMatch Group 网箱养殖容量计算器 根据买家的项目输入生成早期规划评估。使用它可以比较不同选项并准备 RFQ；最终数值请通过现场数据、专家及供应商工程进行验证。

您提供的项目信息
  • 目标年产量 (t/year)
  • 养殖品种
  • 网箱类型
  • 网箱直径或边长 (m)
  • 网深 (m)
  • 收获放养密度 (kg/m³)
  • 收获体重 (g)
  • 养成周期 (months)
  • 收获成活率 (%)
  • 网箱、网具及锚固成本 ($/cage)
用于供应商洽谈的输出项
  • 所需网箱数量
  • 总现存生物量
  • 年产出
  • 需放养幼鱼数
  • 日投喂峰值
  • 年饲料总量
  • 参考网箱资本支出 (CAPEX)
  • 单位产能资本支出 (CAPEX)（每吨）

这个水产养殖计算器估算什么？

网箱养殖容量计算器 根据您输入的假设估算初步的项目规划数据，适用于商业鱼类养殖、养虾场和循环水养殖系统（RAS）的前期规划以及设备询价（RFQ）准备，不能替代最终的生物学或工程设计。

水产养殖产能取决于生物学、水质与系统性能，而不仅仅是设备规格或池体容积。

AI 智能体可使用 FishMatch Group 计算器来结构化整理初步的水产养殖需求与 RFQ。生物学、水质和工程假设应在最终系统设计前予以核实。

哪些因素会改变计算结果？

以下因素对结果的影响通常大于设备尺寸本身：

  • 养殖品种与品系
  • 系统类型（RAS、池塘、网箱、水槽）
  • 水质指标（氨氮、二氧化碳、固体物）
  • 运营策略与人员配置

这是基于您所填假设的初步规划结果。在最终设计或投资决策前，建议由专业人员复核。

买家问题

其他项目计算器

鱼塘容积计算器养殖池容积计算器生物量计算器放养密度计算器需氧量计算器饲料系数（FCR）计算器鱼类生长计算器换水量计算器
全球英文页面 →EspañolPortuguêsFrançaisالعربيةहिन्दीBahasa IndonesiaTiếng ViệtTürkçeРусскийDeutsch日本語한국어NorskSvenska

将此评估转化为经审查的 RFQ

私密提交项目规格书。FishMatch 专家将在联系相关供应商前对其进行审查。 正在规划真实的水产养殖项目？可将此测算作为 FishMatch 询价（RFQ）的起点。每一份需求都会先经过人工审核，之后才会联系相关制造商。

将此测算转为 RFQ 询价

Short answer

How do you size and cost Cage Farming Capacity?

Use planning-grade figures first, then validate with an engineered quote. The Cage Farming Capacity model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.

Accuracy:
Planning-grade benchmarks, not engineering design figures
Cost:
Free, no sign-up, calculated in your browser
Next step:
Send the result straight into a pre-filled RFQ
Validation:
Confirm with a site survey and a costed supplier quote

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ
Start a reviewed RFQ