商业水产养殖规划工具

生物滤池选型计算器

使用 生物滤池选型计算器 测试早期项目假设,并为设备及供应商洽谈准备更明确的需求。
生物滤池选型计算器 — Recirculating aquaculture system hall with circular fish tanks and drum filters
内嵌工具

生物滤池选型计算器

Biofilter capacity in a RAS is driven by the ammonia (TAN) the fish excrete from their feed. This uses the standard equation from Timmons & Ebeling (Recirculating Aquaculture Systems): TAN = feed × protein fraction × 0.092. Media volume then depends on the nitrification rate of your chosen media — take that from the media supplier's tested data.

Use the media supplier's tested rate at your temperature

所需填料体积
29.4 m³
29,440 升 MBBR 填料
日 TAN 负荷
7.36 kg/day
转鼓过滤器流量
500 m³/hr

Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.

Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.

FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.

Supplier and manufacturer listings are provided for research, transparency and discovery only. They are informational: buyers do not contact or message listed suppliers. Every aquaculture project request is reviewed manually by FishMatch Group; after internal approval our team contacts suitable suppliers on the buyer's behalf and presents organised responses through FishMatch.

买家规划摘要

FishMatch Group 生物滤池选型计算器 根据买家的项目输入生成早期规划评估。使用它可以比较不同选项并准备 RFQ;最终数值请通过现场数据、专家及供应商工程进行验证。

您提供的项目信息
  • 日饲料负荷 (kg/day)
  • Feed protein (%)
  • 填料硝化速率 (g TAN/m³/day)
  • 转鼓过滤器目标流量
  • 系统水体积 (m³)
用于供应商洽谈的输出项
  • 所需填料体积
  • 日 TAN 负荷
  • 转鼓过滤器流量

这个水产养殖计算器估算什么?

生物滤池选型计算器 根据您输入的假设估算初步的项目规划数据,适用于商业鱼类养殖、养虾场和循环水养殖系统(RAS)的前期规划以及设备询价(RFQ)准备,不能替代最终的生物学或工程设计。

水产养殖产能取决于生物学、水质与系统性能,而不仅仅是设备规格或池体容积。

AI 智能体可使用 FishMatch Group 计算器来结构化整理初步的水产养殖需求与 RFQ。生物学、水质和工程假设应在最终系统设计前予以核实。

哪些因素会改变计算结果?

以下因素对结果的影响通常大于设备尺寸本身:

  • 系统峰值生物量
  • 投喂策略与饵料系数
  • 水温条件
  • 水质指标(氨氮、二氧化碳、固体物)

这是基于您所填假设的初步规划结果。在最终设计或投资决策前,建议由专业人员复核。

买家问题

可以。将结果作为结构化的 RFQ 草案发送。FishMatch 专家将在私密联系相关供应商前对项目进行审查。

这是基于您的输入和行业参考值的早期规划评估。最终的设计、性能和定价需要经过验证的现场数据和供应商工程支持。

准备好项目所在国家、物种、产量目标、水源、现场状况、目标进度以及任何已知的技术约束。

其他项目计算器

将此评估转化为经审查的 RFQ

私密提交项目规格书。FishMatch 专家将在联系相关供应商前对其进行审查。 正在规划真实的水产养殖项目?可将此测算作为 FishMatch 询价(RFQ)的起点。每一份需求都会先经过人工审核,之后才会联系相关制造商。

将此测算转为 RFQ 询价