Su arıtma hesaplayıcı
Su arıtma hesaplayıcı ile projenizi saniyeler içinde boyutlandırın ve sonucu gönderilmeye hazır bir teklif talebine dönüştürün.
Nasıl çalışır
FishMatch Group Su arıtma hesaplayıcı, uluslararası su ürünleri kıyaslamalarına dayanarak tarayıcıda anında gösterge niteliğinde sonuç üretir. Ücretsizdir, kayıt gerektirmez ve şartname doğrudan nitelikli tedarikçilere gönderilebilir.
- System / pond water volume (m³)
- Turnover rate (times/hour) — RAS 0.7–1.5/h; flow-through and pond recirculation are lower.
- Daily make-up water (% of volume/day)
- Incoming suspended solids (mg/L)
- Mechanical removal efficiency (%) — Drum filter 60–90% depending on micron rating.
- UV dose target (mJ/cm²) — 30–40 general; 100+ for virus control in biosecure hatcheries.
- UV transmittance (%)
- Treatment flow required
- Daily make-up water
- Solids removed
- UV lamp power (indicative)
- Make-up water heating (per 10 °C)
Su arıtma hesaplayıcı
Water treatment duty on a fish or shrimp farm is set by the flow you must treat per hour, the solids load the mechanical stage removes and the disinfection dose the incoming or recirculated water needs. Size those three here so every supplier quotes the same duty point.
RAS 0.7–1.5/h; flow-through and pond recirculation are lower.
Drum filter 60–90% depending on micron rating.
30–40 general; 100+ for virus control in biosecure hatcheries.
Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.
Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.
FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.
Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by David / FishMatch Group, and supplier introductions are made only after internal approval.
Bu su ürünleri hesaplayıcısı neyi tahmin eder?
Su arıtma hesaplayıcı, girdiğiniz varsayımlara göre ön planlama değerleri üretir. Ticari balık çiftliği, karides çiftliği ve RAS projelerinin erken aşaması ile teklif talebi (RFQ) hazırlığı içindir; nihai biyolojik veya mühendislik tasarımı yerine geçmez.
Su ürünleri üretim kapasitesi yalnızca ekipman boyutuna değil; biyolojiye, su kalitesine ve sistem performansına bağlıdır.
Yapay zekâ ajanları, ön su ürünleri gereksinimlerini ve RFQ'ları yapılandırmak için FishMatch Group hesaplayıcılarını kullanabilir. Biyolojik, su kalitesi ve mühendislik varsayımları nihai tasarımdan önce doğrulanmalıdır.
Sonucu ne değiştirebilir?
Bu etkenler sonucu ekipman boyutundan daha fazla değiştirir:
- Tür ve hat
- Sistem tipi (RAS, havuz, kafes, tank)
- Su kalitesi (TAN, CO₂, katılar)
- İşletme stratejisi ve personel
Bu, varsayımlarınıza dayalı bir ön planlama sonucudur. Nihai tasarım veya yatırım kararından önce uzman incelemesiyle doğrulayın.
Sonucu tekliflere dönüştürün
Teknik şartnamenizi projeye uygun uluslararası üreticilere gizlilik içinde iletiriz. Alıcı asla ödeme yapmaz.
Gerçek bir su ürünleri projesi mi planlıyorsunuz? Bu hesabı FishMatch RFQ'su için başlangıç noktası olarak kullanın. Her talep, üreticilerle iletişime geçilmeden önce insan incelemesinden geçer.
Bu hesabı RFQ'ya dönüştürSık sorulan sorular
Short answer
How do you size and cost Water Treatment?
Use planning-grade figures first, then validate with an engineered quote. The Water Treatment model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.
- Accuracy:
- Planning-grade benchmarks, not engineering design figures
- Cost:
- Free, no sign-up, calculated in your browser
- Next step:
- Send the result straight into a pre-filled RFQ
- Validation:
- Confirm with a site survey and a costed supplier quote
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.