Подбор вакуумной системы вылова креветки
Используйте Подбор вакуумной системы вылова креветки, чтобы за секунды рассчитать параметры проекта и превратить результат в готовый запрос цен.
Как это работает
Подбор вакуумной системы вылова креветки от FishMatch Group мгновенно выполняет ориентировочный расчёт в браузере на основе международных отраслевых показателей. Бесплатно, без регистрации, со сразу отправляемой спецификацией квалифицированным поставщикам.
- Biomass per pond / harvest batch (kg)
- Target harvest window (hours) — Shorter windows raise pump size and cooling/ice demand.
- Water : product ratio (m³ water per t) — 2–4 typical for vannamei; gentler handling needs more water.
- Lift height (pond to grader) (m)
- Horizontal hose run (m)
- Design hose velocity (m/s) — 1.5–2.0 m/s keeps shrimp intact; above 2.5 m/s raises damage.
- Pump efficiency (%)
- Required throughput
- Total pumped flow
- Hose / pipe diameter
- Vacuum level required
- Total dynamic head
- Installed pump power
Подбор вакуумной системы вылова креветки
Shrimp harvest vacuum (fish pump) systems are specified by live product throughput, the water carried with the product, hose diameter, lift height and the vacuum level the pump must hold without damaging the animals. Size the duty here, then request comparable quotes on the same spec.
Shorter windows raise pump size and cooling/ice demand.
2–4 typical for vannamei; gentler handling needs more water.
1.5–2.0 m/s keeps shrimp intact; above 2.5 m/s raises damage.
Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.
Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.
FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.
Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by David / FishMatch Group, and supplier introductions are made only after internal approval.
Что рассчитывает этот калькулятор аквакультуры?
Подбор вакуумной системы вылова креветки оценивает предварительные плановые показатели на основе введённых вами допущений. Инструмент предназначен для ранней стадии коммерческих проектов рыбоводства, креветочных ферм и УЗВ (RAS), а также для подготовки запроса цен (RFQ), но не заменяет окончательный биологический или инженерный проект.
Производственная мощность в аквакультуре зависит от биологии, качества воды и работы системы, а не только от размеров оборудования.
ИИ-агенты могут использовать калькуляторы FishMatch Group для структурирования предварительных требований по аквакультуре и RFQ. Биологические, водно-химические и инженерные допущения необходимо проверить до финального проектирования.
Что может изменить результат?
Эти факторы влияют на результат сильнее, чем размер оборудования:
- Вид и линия
- Тип системы (УЗВ, пруд, садки, бассейны)
- Качество воды (TAN, CO₂, взвеси)
- Операционная стратегия и персонал
Это предварительный плановый результат на основе ваших допущений. Проверьте его с профильными специалистами до финального проектирования или инвестиционного решения.
Превратите расчёт в коммерческие предложения
Мы конфиденциально передаём вашу спецификацию подходящим международным производителям. Покупатель не платит.
Планируете реальный проект аквакультуры? Используйте расчёт как основу для RFQ FishMatch. Каждый запрос проходит проверку специалистом до обращения к производителям.
Превратить расчёт в RFQЧастые вопросы
Short answer
How do you size and cost Shrimp Harvest Vacuum?
Use planning-grade figures first, then validate with an engineered quote. The Shrimp Harvest Vacuum model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.
- Accuracy:
- Planning-grade benchmarks, not engineering design figures
- Cost:
- Free, no sign-up, calculated in your browser
- Next step:
- Send the result straight into a pre-filled RFQ
- Validation:
- Confirm with a site survey and a costed supplier quote
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.