അക്വാകൾച്ചർ ജല ശുദ്ധീകരണ കാൽക്കുലേറ്റർ
ഒരു മത്സ്യ അല്ലെങ്കിൽ ചെമ്മീൻ ഫാമിലെ ജല ശുദ്ധീകരണത്തിൻ്റെ ഡ്യൂട്ടി നിശ്ചയിക്കുന്നത് ഒരു മണിക്കൂറിൽ നിങ്ങൾ എത്ര വെള്ളം ശുദ്ധീകരിക്കണം, മെക്കാനിക്കൽ ഘട്ടം നീക്കം ചെയ്യുന്ന ഖരപദാർത്ഥങ്ങളുടെ അളവ്, കൂടാതെ വരുന്നതോ പുനഃചംക്രമണം ചെയ്യുന്നതോ ആയ വെള്ളത്തിന് ആവശ്യമായ അണുനശീകരണ ഡോസ് എന്നിവയെ ആശ്രയിച്ചാണ്. ഓരോ വിതരണക്കാരനും ഒരേ ഡ്യൂട്ടി പോയിൻ്റിന് വില നൽകുന്നതിനായി ഈ മൂന്ന് കാര്യങ്ങൾ ഇവിടെ അളക്കുക.
വിവരങ്ങൾ നൽകുക
ഫലങ്ങൾ
ആവശ്യമായ ശുദ്ധീകരണ പ്രവാഹം
2,000 m³/hr
2000 m³ at 1 turnovers/hour
ദിവസേനയുള്ള പുതിയ വെള്ളം
200 m³/day
10% of system volume — sets intake, pumping and heating duty
നീക്കം ചെയ്ത ഖരപദാർത്ഥങ്ങൾ
0.8 kg/day
≈ 0.08 m³/day backwash slurry at ~1% dry solids
UV ലാമ്പ് പവർ (സൂചകമായി)
6.7 kW
40 mJ/cm² at 85% UVT — confirm against validated reactor curves
മേക്ക്-അപ്പ് വെള്ളം ചൂടാക്കൽ (ഓരോ 10 °C-നും)
0.1 kW
Continuous thermal load if intake water is 10 °C below setpoint
ആസൂത്രണ കുറിപ്പുകൾ
- മെക്കാനിക്കൽ ഫിൽട്രേഷൻ്റെ വില മൈക്രോൺ റേറ്റിംഗിനെയും ബാക്ക്വാഷ് വെള്ളത്തിൻ്റെ ഉപയോഗത്തെയും അടിസ്ഥാനമാക്കി നൽകുക, വെറും നോമിനൽ ഫ്ലോ മാത്രം നോക്കരുത് — ബാക്ക്വാഷ് ശുദ്ധീകരിച്ച ഫ്ലോയുടെ 0.2–1% ആകാം.
- UV അളവ് നിർമ്മാതാവിൻ്റെ സാധൂകരിച്ച ഡോസ് കർവിൽ നിന്ന് നിങ്ങളുടെ യഥാർത്ഥ UVT, ഫ്ലോ എന്നിവയിൽ നിന്നുള്ളതായിരിക്കണം; മുകളിലുള്ള ചിത്രം ഒരു ആസൂത്രണ സൂചന മാത്രമാണ്.
- ഓസോൺ, ഡിഗാസിംഗ്, pH നിയന്ത്രണം എന്നിവ സാധാരണയായി ഒരു ജലപരിശോധനയ്ക്ക് ശേഷം നിർദ്ദേശിക്കപ്പെടുന്നു — നിങ്ങളുടെ RFQ പാക്കിൽ ഒരെണ്ണം ഉൾപ്പെടുത്തുക.
- ഔട്ട്പുട്ടുകൾ ആസൂത്രണ തലത്തിലുള്ള എസ്റ്റിമേറ്റുകളാണ്, ഒരു എഞ്ചിനീയറിംഗ് ഡിസൈനോ ട്രീറ്റ്മെൻ്റ് ഗ്യാരണ്ടിയോ അല്ല.
ഇവ ഏകദേശ ആസൂത്രണ കണക്കുകൾ മാത്രമാണ്, ഉറപ്പല്ല. വിവർത്തനം യാന്ത്രികം — ചില വിശദാംശങ്ങൾ ഇംഗ്ലീഷിൽ ആകാം.
Short answer
What is the fastest way to get quotes for Water Treatment?
Submit one structured request for Water Treatment. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
- How it works:
- One structured request, human-reviewed before any supplier outreach
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Confidentiality:
- Supplier names are never exposed during evaluation
- Cost to buyers:
- No fee charged to the buyer
What is the fastest way to get quotes for Water Treatment?
Submit one structured request for Water Treatment. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.
Before you request quotes
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.