চিংড়ি পুকুর বায়ুচলাচল ক্যালকুলেটর
বায়ুচলাচল হল বেশিরভাগ চিংড়ি খামারে সবচেয়ে বড় একক বিদ্যুৎ খরচ এবং রাতের বেলায় অক্সিজেন সংকট প্রতিরোধের প্রধান সুরক্ষা মার্জিন। এই সরঞ্জামটি পুকুরের ক্ষেত্রফল, গভীরতা, মজুত ঘনত্ব, লক্ষ্য ফসল তোলার ওজন এবং এয়ারেটরের ধরনকে HP এবং kW-তে প্রাথমিক বায়ুচলাচল প্রয়োজনীয়তা, নির্দেশক ইউনিটের সংখ্যা এবং সেগুলো চালানোর জন্য শক্তির খরচে রূপান্তরিত করে।
তথ্য দিন
ফলাফল
সর্বোচ্চ স্থিতিশীল বায়োমাস
9 t
450 thousand shrimp at 20 g in 1.00 ha
প্রাথমিক বায়ুচলাচল প্রয়োজনীয়তা
9.9 HP
7.4 kW at 1.1 HP per tonne of peak biomass
প্রতি হেক্টরে বায়ুচলাচল
9.9 HP/ha
Compare against local practice for your production system
নির্দেশক এয়ারেটর ইউনিট
5 × 2 HP
Distribute for circulation, not just oxygen transfer
জলীয় আয়তন বায়ুচলাচল
12,000 m³
1.2 m average depth
শক্তির ব্যবহার
103 kWh/day
11,374 kWh per 110-day cycle at 14 h/day
প্রতি চক্রে এ্যারেশন শক্তির খরচ
$1,365
≈ $0.15 per kg harvested
প্রস্তাবিত ব্যাকআপ ক্ষমতা
3 HP
Emergency reserve or standby generator duty — size with your supplier
পরিকল্পনা নোট
- সর্বোচ্চ বায়োমাসের প্রতি টনে HP একটি বহুল ব্যবহৃত পরিকল্পনা হিউরিস্টিক, ভর-ভারসাম্য নকশা নয়। প্রকৃত অক্সিজেনের চাহিদা তাপমাত্রা, লবণাক্ততা, খাওয়ানোর হার, শ্যাওলার পরিমাণ এবং রাতের শ্বাস-প্রশ্বাসের সাথে পরিবর্তিত হয়।
- এয়ারেটরের অবস্থান মোট হর্সপাওয়ারের মতোই সঞ্চালন এবং কাদার জমা হওয়া নির্ধারণ করে — একই HP খারাপভাবে স্থাপন করা হলে পুকুরকে রক্ষা করবে না।
- স্ট্যান্ডার্ডাইজড এ্যারেশন দক্ষতা (kg O₂/kWh) প্যাডেলহুইল, অ্যাসপিরেটর এবং ডিফিউজড সিস্টেমের মধ্যে তীব্রভাবে পরিবর্তিত হয়; পরীক্ষিত SAE এবং SOTR পরিসংখ্যানের জন্য সরবরাহকারীদের জিজ্ঞাসা করুন।
- চূড়ান্ত এ্যারেশন নকশা কেনার আগে একজন যোগ্যতাসম্পন্ন কারিগরি সরবরাহকারী বা প্রকৌশলী দ্বারা বৈধতা প্রাপ্ত হতে হবে।
এগুলি আনুমানিক পরিকল্পনা সংখ্যা, কোনো নিশ্চয়তা নয়। অনুবাদ স্বয়ংক্রিয় — কিছু বিস্তারিত ইংরেজিতে থাকতে পারে।
Short answer
What is the fastest way to get quotes for Shrimp Pond Aeration?
Submit one structured request for Shrimp Pond Aeration. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
- How it works:
- One structured request, human-reviewed before any supplier outreach
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Confidentiality:
- Supplier names are never exposed during evaluation
- Cost to buyers:
- No fee charged to the buyer
What is the fastest way to get quotes for Shrimp Pond Aeration?
Submit one structured request for Shrimp Pond Aeration. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.
Before you request quotes
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.