Guia do mercado de aquicultura
Calculadora de custos de fazenda aquícola em Paquistão
Estime capex, ração e energia de uma fazenda de peixes ou camarão em Paquistão com preços locais. Resultados em moeda local e USD.
Câmbio utilizado: 1 USD ≈ 280 PKR
Resultados indicativos
- Capex de equipamentos e instalação
- PKR 472.500.000 · US$ 1.687.500 – PKR 735.000.000 · US$ 2.625.000
- Ração necessária
- 450 t/ano
- Custo da ração
- PKR 138.600.000 · US$ 495.000/ano
- Custo de energia
- PKR 84.000.000 · US$ 300.000/ano
- Custo da água (reposição RAS)
- PKR 35.000.000 · US$ 125.000/ano
- IVA/impostos sobre equipamentos (18%)
- PKR 85.050.000 · US$ 303.750 – PKR 132.300.000 · US$ 472.500
- Volume de água RAS
- 2.083 m³
Estimativas indicativas com base em faixas regionais de 2026 e câmbio aproximado. Não é uma cotação; obras, terreno, edificações e impostos variam.
Energia: tarifas comerciais GlobalPetrolPrices (2026). Tarifas de água e câmbio são estimativas; imposto pela alíquota nacional padrão.
Perguntas frequentes
Quanto custa uma fazenda de peixes em Paquistão?
Um RAS indicativo de 250 toneladas por ano em Paquistão custa cerca de PKR 472,5 mi (≈ US$ 1,7 mi) – PKR 735,0 mi (≈ US$ 2,6 mi) em equipamentos e instalação, sem terreno e edificações. Viveiros e tanques-rede costumam custar menos por tonelada. Use a calculadora e depois peça cotações.
Quais peixes e camarões são cultivados em Paquistão?
Os projetos comerciais em Paquistão concentram-se principalmente em carpa, camarão, tilápia, truta.
Esta página em outros idiomas
Short answer
What is the fastest way to get quotes for Pakistan?
Submit one structured request for Pakistan. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
- How it works:
- One structured request, human-reviewed before any supplier outreach
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Confidentiality:
- Supplier names are never exposed during evaluation
- Cost to buyers:
- No fee charged to the buyer
What is the fastest way to get quotes for Pakistan?
Submit one structured request for Pakistan. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.