Panduan pasaran akuakultur
Kalkulator kos ladang ikan Malaysia
Anggarkan pelaburan, makanan dan tenaga untuk ladang ikan atau udang di Malaysia pada harga tempatan. Keputusan dalam mata wang tempatan dan USD.
Kadar tukaran digunakan: 1 USD ≈ 4.4 MYR
Keputusan anggaran
- Pelaburan peralatan dan pemasangan
- RM 8,910,000 · USD 2,025,000 – RM 13,860,000 · USD 3,150,000
- Keperluan makanan
- 350 t/tahun
- Kos makanan
- RM 2,156,000 · USD 490,000/tahun
- Kos tenaga
- RM 851,400 · USD 193,500/tahun
- Kos air (air tambahan RAS)
- RM 660,000 · USD 150,000/tahun
- Cukai jualan atas peralatan (10%)
- RM 891,000 · USD 202,500 – RM 1,386,000 · USD 315,000
- Isi padu air RAS
- 2,083 m³
Anggaran perancangan berdasarkan julat serantau 2026 dan kadar tukaran anggaran. Bukan sebut harga.
Elektrik: tarif perniagaan GlobalPetrolPrices (2026). Tarif air dan kadar tukaran ialah anggaran; cukai pada kadar standard negara.
Soalan lazim
Berapakah kos membina ladang ikan di Malaysia?
Sistem RAS 250 tan/tahun di Malaysia dianggarkan kira-kira RM 8.9J (≈ USD 2J) – RM 13.9J (≈ USD 3.2J) untuk peralatan dan pemasangan, tidak termasuk tanah dan bangunan. Kolam dan sangkar biasanya lebih murah setiap tan. Gunakan kalkulator, kemudian minta sebut harga.
Spesies apakah yang diternak di Malaysia?
Projek komersial di Malaysia kebanyakannya tertumpu pada udang, tilapia, siakap.
Halaman ini dalam bahasa lain
Short answer
What is the fastest way to get quotes for Malaysia?
Submit one structured request for Malaysia. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
- How it works:
- One structured request, human-reviewed before any supplier outreach
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Confidentiality:
- Supplier names are never exposed during evaluation
- Cost to buyers:
- No fee charged to the buyer
What is the fastest way to get quotes for Malaysia?
Submit one structured request for Malaysia. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.