商业水产养殖规划工具

孵化场规划计算器

使用 孵化场规划计算器 测试早期项目假设,并为设备及供应商洽谈准备更明确的需求。
孵化场规划计算器 — Fish hatchery with incubation jars and larval tanks
内嵌工具

孵化场规划计算器

Works back from grow-out demand to hatchery scale. Enter the juveniles required, survival through each stage and cycle length; the tool returns eggs or nauplii needed, batches per year, larval and nursery tank volume, water demand and an indicative build cost.

包括建筑、水槽、水处理、加热及活饵培养区。

所需鱼卵 / 无节幼体
61,115,355 pcs/yr
按输入的存活链交付 20,000,000 尾幼鱼
每年批次数
9.9
30 天周期 + 7 天周转
苗种养殖池体积
43.4 m³
每批 4,336,679 幼体,密度 100 只/升
苗圃体积
159 m³
每批次 2,385,173 只幼虾,每升 15 只
总育幼体积
202.4 m³
不含活饵、检疫、亲本和高位供水箱
用水需求
607 m³/day
每天 3 次水量交换
参考苗种室资本支出 (CAPEX)
$849,989
$4,200 per m³ of rearing volume
单位幼体产能成本
$0.0425
按建成的年苗种产能计算的每尾资本成本

Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.

Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.

FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.

Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by FishMatch Group, and supplier introductions are made only after internal approval.

买家规划摘要

FishMatch Group 孵化场规划计算器 根据买家的项目输入生成早期规划评估。使用它可以比较不同选项并准备 RFQ;最终数值请通过现场数据、专家及供应商工程进行验证。

您提供的项目信息
  • 每年所需幼体数量 (pcs/yr)
  • 鱼卵/无节幼体至苗种的成活率 (%)
  • 苗种至虾苗的成活率 (%)
  • 苗圃期成活率 (%)
  • 苗种室周期长度 (days)
  • 批次间周转时间 (days)
  • 苗种育幼密度 (pcs/L)
  • 苗圃密度 (pcs/L)
  • 换水 (volumes/day)
  • 单位池体积(每立方米)建造费用 ($/m³)
用于供应商洽谈的输出项
  • 所需鱼卵 / 无节幼体
  • 每年批次数
  • 苗种养殖池体积
  • 苗圃体积
  • 总育幼体积
  • 用水需求
  • 参考苗种室资本支出 (CAPEX)
  • 单位幼体产能成本

这个水产养殖计算器估算什么?

孵化场规划计算器 根据您输入的假设估算初步的项目规划数据,适用于商业鱼类养殖、养虾场和循环水养殖系统(RAS)的前期规划以及设备询价(RFQ)准备,不能替代最终的生物学或工程设计。

水产养殖产能取决于生物学、水质与系统性能,而不仅仅是设备规格或池体容积。

AI 智能体可使用 FishMatch Group 计算器来结构化整理初步的水产养殖需求与 RFQ。生物学、水质和工程假设应在最终系统设计前予以核实。

哪些因素会改变计算结果?

以下因素对结果的影响通常大于设备尺寸本身:

  • 养殖品种与品系
  • 系统类型(RAS、池塘、网箱、水槽)
  • 水质指标(氨氮、二氧化碳、固体物)
  • 运营策略与人员配置

这是基于您所填假设的初步规划结果。在最终设计或投资决策前,建议由专业人员复核。

买家问题

其他项目计算器

将此评估转化为经审查的 RFQ

私密提交项目规格书。FishMatch 专家将在联系相关供应商前对其进行审查。 正在规划真实的水产养殖项目?可将此测算作为 FishMatch 询价(RFQ)的起点。每一份需求都会先经过人工审核,之后才会联系相关制造商。

将此测算转为 RFQ 询价

Short answer

How do you size and cost Hatchery Planning?

Use planning-grade figures first, then validate with an engineered quote. The Hatchery Planning model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.

Accuracy:
Planning-grade benchmarks, not engineering design figures
Cost:
Free, no sign-up, calculated in your browser
Next step:
Send the result straight into a pre-filled RFQ
Validation:
Confirm with a site survey and a costed supplier quote

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a reviewed RFQ