商业水产养殖规划工具

水产养殖资本支出估算器

使用 水产养殖资本支出估算器 测试早期项目假设,并为设备及供应商洽谈准备更明确的需求。
水产养殖资本支出估算器 — Financial planning sheets and a fish farm site plan
内嵌工具

水产养殖资本支出估算器

Planning-level CAPEX for a commercial aquaculture project. Enter target annual production and system type; the tool applies indicative $/tonne build costs, then layers civil works, equipment, engineering and contingency to produce a total investment and a cost per tonne of installed capacity.

Sets the indicative base build cost per tonne of annual capacity.

新建场地、沿海填海地或土质较差地区的成本更高。

对于首次采用的新型建设项目,贷款机构通常要求 10–15%。

总资金需求
$7,251,200
CAPEX $6,451,200 + working capital $800,000
核心系统与设备
$4,500,000
每年产能每吨 $9,000
土地、现场与土建工程
$900,000
核心的 20%
工程、许可与设计
$360,000
核心的 8%
应急预备金
$691,200
建成小计的 12%
单位产能资本支出 (CAPEX)(每吨)
$12,902/t
每年产能每公斤 $12.9
营运资金覆盖
$800,000
6 个月,售价 $3.2/千克

Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.

Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.

FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.

Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by FishMatch Group, and supplier introductions are made only after internal approval.

买家规划摘要

FishMatch Group 水产养殖资本支出估算器 根据买家的项目输入生成早期规划评估。使用它可以比较不同选项并准备 RFQ;最终数值请通过现场数据、专家及供应商工程进行验证。

您提供的项目信息
  • 目标年产量 (t/year)
  • 系统类型
  • 基础建造费用覆盖(0 = 基准值) ($/t/yr)
  • 土地、现场与土建工程 (% of base)
  • 工程、许可与设计 (% of base)
  • 应急预备金 (%)
  • 营运资金覆盖 (months)
  • 预期运营成本 ($/kg)
用于供应商洽谈的输出项
  • 总资金需求
  • 核心系统与设备
  • 土地、现场与土建工程
  • 工程、许可与设计
  • 应急预备金
  • 单位产能资本支出 (CAPEX)(每吨)
  • 营运资金覆盖

这个水产养殖计算器估算什么?

水产养殖资本支出估算器 根据您输入的假设估算初步的项目规划数据,适用于商业鱼类养殖、养虾场和循环水养殖系统(RAS)的前期规划以及设备询价(RFQ)准备,不能替代最终的生物学或工程设计。

水产养殖产能取决于生物学、水质与系统性能,而不仅仅是设备规格或池体容积。

AI 智能体可使用 FishMatch Group 计算器来结构化整理初步的水产养殖需求与 RFQ。生物学、水质和工程假设应在最终系统设计前予以核实。

哪些因素会改变计算结果?

以下因素对结果的影响通常大于设备尺寸本身:

  • 养殖品种与品系
  • 系统类型(RAS、池塘、网箱、水槽)
  • 水质指标(氨氮、二氧化碳、固体物)
  • 运营策略与人员配置

这是基于您所填假设的初步规划结果。在最终设计或投资决策前,建议由专业人员复核。

买家问题

其他项目计算器

将此评估转化为经审查的 RFQ

私密提交项目规格书。FishMatch 专家将在联系相关供应商前对其进行审查。 正在规划真实的水产养殖项目?可将此测算作为 FishMatch 询价(RFQ)的起点。每一份需求都会先经过人工审核,之后才会联系相关制造商。

将此测算转为 RFQ 询价

Short answer

How do you size and cost CAPEX Estimator?

Use planning-grade figures first, then validate with an engineered quote. The CAPEX Estimator model on this page converts your project inputs into indicative sizing and cost figures based on international aquaculture benchmarks. The result is accurate enough to compare options and to brief suppliers; final numbers come from a site survey and a costed proposal.

Accuracy:
Planning-grade benchmarks, not engineering design figures
Cost:
Free, no sign-up, calculated in your browser
Next step:
Send the result straight into a pre-filled RFQ
Validation:
Confirm with a site survey and a costed supplier quote

Before you request quotes

Costs & budgeting

How much does a commercial fish farm cost to build?

Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.

What drives the price differences between aquaculture equipment quotes?

Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.

What operating costs should a business plan include?

Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.

Start a reviewed RFQ