RAS boyutlandırma hesaplayıcı.
RAS boyutlandırması tank çizimlerinden değil, üretim hedefinden başlar. Tepe canlı biyokütle günlük yem yükünü belirler; yem yükü oksijen talebini, amonyak yükünü ve katı madde üretimini belirler; yoğunluk sınırları tank hacmini, devir oranı ise resirkülasyon debisini, pompa gücünü ve enerjiyi belirler.
Resirkülasyonlu sisteminizi boyutlandırın
RAS boyutlandırma hesaplayıcı.
Recirculating aquaculture systems (RAS) are sized around standing biomass, feed load and target density. This tool derives system volume, daily make-up water, TAN production, MBBR biofilter volume and oxygen demand — the five numbers every RAS engineer starts with.
Trout/salmon 40–80, tilapia 60–120
Modern RAS 3–10%
Planning estimate only: Final species assumptions, stocking density, water quality, biosecurity, system design, equipment sizing, production performance and financial outcomes must be confirmed by qualified independent professionals and the selected provider.
Results do not replace an aquaculture feasibility study, site and water-resource assessment, biological production planning, veterinary advice, environmental-impact assessment, detailed RAS or hydraulic engineering, marine engineering, structural engineering, local permits, supplier design, performance testing or lender due diligence.
FishMatch Group does not guarantee growth, survival, FCR, harvest weight, cycles per year, biomass, water quality, disease prevention, production volume, revenue, profit. Outputs are not legal, financial, engineering, tax or veterinary advice. Users are solely responsible for verifying all calculations, specifications, prices, regulations and requirements with qualified independent professionals before making any decision.
Supplier and manufacturer listings are provided for research, transparency and discovery only. FishMatch Group does not provide automatic buyer-supplier introductions. Every aquaculture project request is reviewed manually by David / FishMatch Group, and supplier introductions are made only after internal approval.
RAS boyutlandırmasının beş adımı
- 1. Üretim hedefini sabitleyin
Yıllık hasat (ton) ve hedef hasat ağırlığı canlı biyokütleyi belirler. Ekipmanı belirleyen yıllık tonaj değil, tepe canlı biyokütledir.
- 2. Biyokütleyi yem yüküne çevirin
Tepe biyokütlede günlük yem ana değişkendir: oksijen tüketimini, biyofiltre için TAN üretimini, CO₂ sıyırma yükünü ve tambur filtre katı madde yükünü belirler.
- 3. Tank ve debiyi boyutlandırın
Yoğunluk sınırları tank hacmini verir; gerekli devir (büyütmede tipik olarak saatte 0,75–1,5 tank hacmi) resirkülasyon debisini, dolayısıyla pompa gücünü ve boru çaplarını verir.
- 4. Filtrasyon ve oksijeni boyutlandırın
Biyofiltre dolgu hacmi TAN yüküne ve alansal giderim hızına bağlıdır. Oksijen beslemesi yem yükü artı güvenlik faktörüdür ve sıvı oksijen mi, yerinde üretim mi gerektiğini belirler.
- 5. Enerji ve yedekliliği boyutlandırın
Pompaj basma yüksekliği, oksijen transferi ve sıcaklık kontrolü elektrik faturasına hâkimdir. Yedek pompa, yedek oksijen ve jeneratör kapasitesi pazarlığa değil, boyutlandırma tablosuna aittir.
Planlama düzeyinde boyutlandırma referansları
| Parametre | Tipik aralık | Not |
|---|---|---|
| Büyütme stok yoğunluğu | 40–90 kg/m³ | Tür ve refah sınırları; somon daha düşük, tilapia daha yüksek. |
| Tank devir oranı | 0,75–1,5 hacim/saat | Yüksek yoğunluk ve sıcak suda daha yüksek devir. |
| Günlük taze su değişimi | Sistem hacminin %1–10'u | %1'in altı denitrifikasyon gerektirir. |
| Oksijen talebi | ≈ kg yem başına 0,4–0,6 kg O₂ | Artı güvenlik faktörü ve sıyırma kayıpları. |
| TAN üretimi | ≈ kg yem başına 30 g TAN (%32 protein) | Biyofiltre dolgu hacmini belirler. |
| Özgül enerji tüketimi | Üretilen kg başına 3–8 kWh | Pompaj, oksijenlendirme ve sıcaklık kontrolü. |
RAS boyutlandırma SSS
FishMatch Group yönetilen bir tedarik hizmetidir. Her brifing, tedarik başlamadan önce bir kişi tarafından incelenir — tedarikçilere otomatik olarak ulaşılmaz ve tedarikçi kimlikleri paylaşılmaz.
Short answer
What is the fastest way to get quotes for RAS Sizing Calculator?
Submit one structured request for RAS Sizing Calculator. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
- How it works:
- One structured request, human-reviewed before any supplier outreach
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Confidentiality:
- Supplier names are never exposed during evaluation
- Cost to buyers:
- No fee charged to the buyer
Before you request quotes
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.