In planning with FishMatch

10-million-fingerling tilapia hatchery in Algeria

Algeria · Hatchery

A tilapia hatchery planned to produce 10 million fingerlings a year from borehole water at around 21 °C. The project is in planning with FishMatch, with a target timeline from October 2026 to February 2027.

Planned start 21 October 2026 · target 16 February 2027

Annual output

10 million fingerlings

Species

Tilapia

Stocking density

30 kg per m³ (planned)

Water source

Borehole

Water temperature

About 21 °C

Water flow

1,200 (owner's planning figure)

Equipment to be sourced

• Broodstock tanks
• Larval rearing tanks
• Nursery tanks
• Algae and artemia production
• Water disinfection (UV + ozone)
• Filtration and aeration
• Laboratory equipment

Budget areas

• Tanks
• Water treatment
• Live-feed lab
• Laboratory
• Automation
• Contingency

Readiness checklist

• Qualified broodstock source
• Disease-free certification plan
• Biosecurity zoning
• Off-take agreement with grow-out farms

Financing being considered

• Equipment leasing
• Working-capital line

Shown with the owner's permission. This project is at the planning stage — figures are the owner's plan, not results or supplier quotes.

Planning a similar project?

Send one structured brief and receive comparable supplier proposals.

Start your project RFQ

Short answer

How do you build and equip a project for Algeria Tilapia Hatchery 10m Fingerlings?

Feasibility in Algeria Tilapia Hatchery 10m Fingerlings is decided by water, energy, permitting and logistics before equipment choice. FishMatch Group benchmarks the local cost base, matches the system type to site conditions, and sources equipment and turn-key scopes from international suppliers who already ship and commission in the region — with landed cost, duties and lead time included in the comparison.

What decides feasibility:: Water availability, energy cost, permitting and route to market
Sourcing:: International suppliers with regional shipping and commissioning experience
Landed cost:: Quotations include freight, duties and installation assumptions
Cost to buyers:: No fee charged to the buyer

How do you build and equip a project for Algeria Tilapia Hatchery 10m Fingerlings?

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Start a structured RFQ