അക്വാകൾച്ചർ എയറേഷൻ കാൽക്കുലേറ്റർ
വായുസഞ്ചാരം ഏറ്റവും ഉയർന്ന ഓക്സിജൻ ആവശ്യകതയെ അടിസ്ഥാനമാക്കിയാണ് നിർണ്ണയിക്കുന്നത്, അല്ലാതെ ശരാശരി ആവശ്യകതയെ അടിസ്ഥാനമാക്കിയല്ല. ഈ ആസൂത്രണ ഉപകരണം സ്പീഷീസ്, ബയോമാസ്, ജലത്തിൻ്റെ താപനില എന്നിവയെ ഓക്സിജൻ ലോഡാക്കി മാറ്റുന്നു, തുടർന്ന് നിങ്ങൾ ഉപയോഗിക്കാൻ ഉദ്ദേശിക്കുന്ന ട്രാൻസ്ഫർ രീതിയുടെ (പാഡിൽ വീൽ, ഡിഫ്യൂസ്ഡ് എയറേഷൻ, ബയോഫ്ലോക്ക് എയർ ഗ്രിഡ് അല്ലെങ്കിൽ RAS ഓക്സിജനേഷൻ) സ്റ്റാൻഡേർഡ് എയറേഷൻ കാര്യക്ഷമത (SAE, kg O₂ per kWh) കൊണ്ട് ഹരിക്കുന്നു. ഇത് ഇൻസ്റ്റാൾ ചെയ്ത പവർ, സൂചക എയറേറ്റർ എണ്ണം, ഒരു ഹെക്ടറിലെ എയറേറ്ററുകൾ, പ്രതിദിന ഊർജ്ജം, നിർദ്ദേശിക്കപ്പെട്ട ഒരു ബാക്കപ്പ് ബ്ലോക്ക് എന്നിവ നൽകുന്നു. ഫലങ്ങൾ ആസൂത്രണ-തലത്തിലുള്ള കണക്കുകൾ മാത്രമാണ്: യഥാർത്ഥ ആവശ്യകതകൾ ഫാമിൻ്റെ രൂപകൽപ്പന, ജലരസതന്ത്രം, ഉയരം, ലവണാംശം, തീറ്റക്രമം, മാനേജ്മെൻ്റ് എന്നിവയെ ആശ്രയിച്ചിരിക്കുന്നു, അവ ഒരു അക്വാകൾച്ചർ എഞ്ചിനീയർ സ്ഥിരീകരിക്കണം.
വിവരങ്ങൾ നൽകുക
ഫലങ്ങൾ
ഡിസൈൻ ഓക്സിജൻ ലോഡ്
7.02 kg O₂/hr
Peak demand 4.68 kg/hr + 50% margin
സ്ഥാപിച്ച എറേഷൻ പവർ
5 kW
At 1.4 kg O₂/kWh transfer efficiency
സൂചക എറേറ്റർ എണ്ണം
4 units
4 per hectare at 1.5 kW each
പ്രതിദിന ഊർജ്ജം
70 kWh/day
$3,587 / year at $0.14/kWh
നിർദ്ദേശിക്കപ്പെട്ട ബാക്കപ്പ് ബ്ലോക്ക്
2 units
Emergency aeration on generator or battery-backed circuit
ആസൂത്രണ കുറിപ്പുകൾ
- എറേറ്റർ എണ്ണം ഒരു ആസൂത്രണ എസ്റ്റിമേറ്റ് ആണ്. സ്ഥാപിച്ച പവർ പോലെ തന്നെ പ്രധാനമാണ് അവയുടെ സ്ഥാനം, ജലചംക്രമണ രീതി, കുളത്തിൻ്റെ ജ്യാമിതി എന്നിവ.
- തീറ്റ കൊടുത്തതിന് 2–4 മണിക്കൂറിനു ശേഷവും വീണ്ടും പുലർച്ചെക്ക് മുമ്പും ഓക്സിജൻ ആവശ്യം കൂടുന്നു — സൈക്കിളിലെ ഏറ്റവും മോശം മണിക്കൂറിനായി വലുപ്പം നിശ്ചയിക്കുക.
- ജലഗുണനിലവാര പ്രശ്നങ്ങൾക്ക് നിരവധി കാരണങ്ങളുണ്ട്. സ്റ്റോക്കിംഗ്, തീറ്റ, ബയോഫിൽട്രേഷൻ, ജലമാറ്റം, മാലിന്യ സംസ്കരണം എന്നിവയോടൊപ്പം എറേഷനും ഒരു ഘടകമാണ്.
- സ്വതന്ത്രമായി പ്രവർത്തിക്കുന്ന ഒരു ബാക്കപ്പ് എറേഷൻ ബ്ലോക്ക് കരുതുക: മിക്ക വലിയ നഷ്ടങ്ങളും സംഭവിക്കുന്നത് പവർ അല്ലെങ്കിൽ ബ്ലോവർ തകരാറുകൾ മൂലമാണ്, അല്ലാതെ ഡിസൈൻ പിഴവ് കാരണമല്ല.
- ഈ ഉപകരണം ഫാം-നിർദ്ദിഷ്ട അക്വാകൾച്ചർ എഞ്ചിനീയറിംഗിനോ ബയോളജിക്കൽ വിലയിരുത്തലിനോ പകരമല്ല.
ഇവ ഏകദേശ ആസൂത്രണ കണക്കുകൾ മാത്രമാണ്, ഉറപ്പല്ല. വിവർത്തനം യാന്ത്രികം — ചില വിശദാംശങ്ങൾ ഇംഗ്ലീഷിൽ ആകാം.
Short answer
What is the fastest way to get quotes for Aeration Sizing?
Submit one structured request for Aeration Sizing. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
- How it works:
- One structured request, human-reviewed before any supplier outreach
- Typical turnaround:
- Depends on scope and site data; no turnaround is guaranteed
- Confidentiality:
- Supplier names are never exposed during evaluation
- Cost to buyers:
- No fee charged to the buyer
What is the fastest way to get quotes for Aeration Sizing?
Submit one structured request for Aeration Sizing. FishMatch Group translates it into a technical RFQ, runs a confidential sourcing round with project-matched international suppliers, and returns comparable quotations. No fee is charged to the buyer, and your identity and project details stay private until you choose to proceed.
How does FishMatch Group source suppliers for this requirement?
You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.
Do buyers see supplier names during the sourcing process?
No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.
Before you request quotes
Equipment scope
What equipment does a commercial aquaculture project actually need?
A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.
Which equipment should be specified before requesting quotes?
Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.
Can equipment be sourced in stages?
Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.