Guida al mercato dell'acquacoltura
Calcolatore dei costi di un allevamento in Italia
Stima capex, mangime ed energia di un allevamento di pesci o gamberi in Italia con prezzi locali. Risultati in valuta locale e USD.
Cambio utilizzato: 1 USD ≈ 0.9 EUR
Risultati indicativi
- Capex attrezzature e installazione
- 2.227.500 € · 2.475.000 USD – 3.465.000 € · 3.850.000 USD
- Mangime necessario
- 275 t/anno
- Costo del mangime
- 371.250 € · 412.500 USD/anno
- Costo energetico
- 554.850 € · 616.500 USD/anno
- Costo dell'acqua (reintegro RAS)
- 562.500 € · 625.000 USD/anno
- IVA sulle attrezzature (22%)
- 490.050 € · 544.500 USD – 762.300 € · 847.000 USD
- Volume d'acqua RAS
- 2083 m³
Stime indicative basate su intervalli regionali 2026 e cambi approssimativi. Non è un preventivo; terreno, edifici, opere e tasse variano.
Elettricità: tariffe business GlobalPetrolPrices (2026). Tariffe idriche e cambi stimati; IVA all'aliquota nazionale ordinaria.
Domande frequenti
Quanto costa un allevamento ittico in Italia?
Un RAS indicativo da 250 tonnellate all'anno in Italia costa circa 2,2 Mln € (≈ 2,5 Mln USD) – 3,5 Mln € (≈ 3,9 Mln USD) tra attrezzature e installazione, esclusi terreno ed edifici. Vasche e gabbie costano in genere meno per tonnellata. Usa il calcolatore e poi richiedi preventivi.
Quali pesci e gamberi si allevano in Italia?
I progetti commerciali in Italia riguardano soprattutto trota, spigola, orata, storione.
Questa pagina in altre lingue
Before you request quotes
Costs & budgeting
How much does a commercial fish farm cost to build?
Budget ranges depend on system type, not on country alone. Pond and cage projects are usually the lowest capital per tonne of annual output, while recirculating (RAS) projects carry the highest equipment and energy share because filtration, oxygenation and backup power are mandatory. Reliable numbers come from a sized bill of quantities — species, target tonnage, water source and grow-out temperature — not from a generic price list. Use the FishMatch calculators to size the project, then submit an RFQ so quotes are priced against the same specification.
What drives the price differences between aquaculture equipment quotes?
Most spread between quotes comes from scope, not from margin: included spares, installation and commissioning, control and automation level, materials (HDPE vs steel vs FRP), certification and testing, delivery terms (EXW vs CIF) and warranty length. Two quotes are only comparable when they answer the same specification. A structured RFQ fixes the scope so differences reflect real engineering choices.
What operating costs should a business plan include?
Feed is normally the largest recurring cost, followed by energy (highest in RAS), labour, fingerlings or post-larvae, health management, water treatment consumables and maintenance. Financing cost and working capital for the first production cycle are frequently underestimated. FishMatch cost tools separate CAPEX from OPEX so the payback assumption is visible rather than implied.