موردو معدات الاستزراع المائي والأعلاف في المملكة العربية السعودية.

قطاع الاستزراع المائي السعودي يقوم على استثمارات الأمن الغذائي ضمن رؤية 2030: مزارع روبيان مكثفة على ساحل البحر الأحمر قرب الليث وجازان، وحدات RAS برية للأسماك البحرية والبلطي لإحلال الواردات، ومشاريع أقفاص بحرية. تجمع FishMatch Group مواصفاتك في بريف واحد، وتطابقها مع مصنّعين ومورّدين يخدمون السوق السعودي فعليًا، وتعيد إليك عروضًا قابلة للمقارنة — دون أي رسوم على المشتري ودون كشف هويتك للموردين.

بريف واحد
عدة موردين
٪٠
تكلفة على المشتري
٤٨ ساعة
عروض مقارنة
١٢ لغة
تغطية دولية

ما الذي تشتريه المشاريع السعودية فعليًا

  • مآخذ مياه البحر ومعالجتها: مضخات، فلاتر رملية، أشعة فوق بنفسجية وأوزون
  • تهوية وأكسجة مضاعفة السعة لمياه تتجاوز 30° مئوية صيفًا
  • مبرّدات ومبادلات حرارية لوحدات RAS البرية والمفرخات
  • أحواض مبطنة بـ HDPE وأنظمة صرف مركزي لمزارع الروبيان المكثفة
  • أقفاص بحرية HDPE ومراسي معتمدة لظروف البحر الأحمر والخليج
  • أعلاف بحرية وأعلاف روبيان عالية البروتين وأنظمة تغذية آلية
  • معدات مفرخات: أحواض تربية يرقات، أعلاف حية، حجر صحي لأمهات التربية
  • أنظمة مراقبة جودة المياه والأتمتة والتحكم عن بُعد

اعتبارات هندسية خاصة بالخليج

أكثر أخطاء التصميم شيوعًا في مشاريع الخليج هو تحجيم التبريد والتهوية على متوسط سنوي بدل ذروة الصيف. نطلب من كل مورّد تثبيت أداء المعدات عند درجة حرارة مياه 32–34° مئوية وملوحة البحر الأحمر المرتفعة، ومقاومة التآكل للمكونات المعدنية، وتوافق الكهرباء مع 380/400 فولت – 60 هرتز، قبل إدراج عرضه في المقارنة.

الأعلاف والتوريد المحلي

الأعلاف تمثل 50–65٪ من تكلفة التشغيل. في السعودية يتوفر إنتاج محلي للأعلاف البحرية وأعلاف الروبيان، لكن الأعلاف المتخصصة للمفرخات والأعلاف عالية البروتين غالبًا ما تُستورد. نقارن سعر العلف على أساس التكلفة لكل كيلوغرام منتج (السعر × معامل التحويل الغذائي) وليس سعر الطن وحده، مع تثبيت شروط الشحن والتخزين.

الجمارك والامتثال والخدمات اللوجستية

  • شهادة المطابقة SASO عبر منصة سابر مطلوبة لمعظم الآلات والمعدات الكهربائية
  • ترخيص المشروع من وزارة البيئة والمياه والزراعة (MEWA) والتقييم البيئي للمواقع الساحلية
  • اشتراطات الهيئة العامة للغذاء والدواء (SFDA) على منتجات الاستزراع المحلية
  • الشحن عبر ميناء جدة الإسلامي للبحر الأحمر وميناء الملك عبد العزيز بالدمام للشرقية
  • ميناء جازان لمشاريع الجنوب لتقليل النقل البري
  • الشحن الجوي لقطع الغيار الحرجة وأعلاف المفرخات الحساسة للوقت

الضمان وقطع الغيار والتشغيل

  • ضمان مكتوب ونطاق خدمة ما بعد البيع داخل المملكة أو عبر الخليج
  • قائمة قطع الغيار الحرجة ومدة توريدها
  • تحديد الإنكوترمز بوضوح مع تسعير الشحن بشكل منفصل
  • توفر مهندس تشغيل وتجربة تسليم في ظروف مناخية مشابهة
FAQ

الأسئلة الشائعة

Smart questions

Fish farm project details

Lets suppliers scope tanks, cages, aeration, feeders and water treatment for your species and site.

Documents that help us quote faster

Optional — you can email them after or bring them to the first call. Uploads are private and encrypted.

  • Site photos or coordinates
  • Water analysis (DO, pH, temperature, ammonia)
  • Existing licenses / aquaculture permits
  • Business plan or feasibility summary (if available)
Aquaculture project details (optional)

Tell suppliers what they need to quote accurately

The more complete your aquaculture project details are, the faster suitable partners can understand your request and respond with realistic options. Leave anything you do not know yet blank — nothing here is required.

Not sure what to write? Answer a few quick questions and we'll draft the brief for you.

Confidential matching · Supplier-paid model · No obligation · Human-assisted sourcing

Short answer

How do you find and compare Saudi Arabia suppliers?

You publish one structured requirement instead of contacting vendors one by one. FishMatch Group turns your Saudi Arabia brief into a technical RFQ, runs it against qualified international manufacturers, integrators and EPC contractors, and returns normalised quotations you can compare on scope, lead time and total cost of ownership. Supplier identities stay confidential until both sides are qualified and agree to proceed.

Coverage:
Vetted manufacturers, integrators and EPC contractors across 40+ countries
Typical turnaround:
Depends on scope and site data; no turnaround is guaranteed
Confidentiality:
Buyer and supplier identities stay private until both sides agree
Cost to buyers:
No fee charged to the buyer
How do you find and compare Saudi Arabia suppliers?

You publish one structured requirement instead of contacting vendors one by one. FishMatch Group turns your Saudi Arabia brief into a technical RFQ, runs it against qualified international manufacturers, integrators and EPC contractors, and returns normalised quotations you can compare on scope, lead time and total cost of ownership. Supplier identities stay confidential until both sides are qualified and agree to proceed.

How does FishMatch Group source suppliers for this requirement?

You submit one structured request. We translate it into a technical RFQ, run it against qualified manufacturers and integrators in the relevant categories, and return normalised quotations you can compare side by side on scope, lead time and total cost of ownership.

Do buyers see supplier names during the sourcing process?

No. Supplier identities stay confidential during discovery and evaluation. You receive anonymised, comparable technical and commercial packages, and introductions happen only after both sides are qualified and agree to proceed.

Before you request quotes

Equipment scope

What equipment does a commercial aquaculture project actually need?

A grow-out project typically needs holding infrastructure (tanks, ponds or cages), water movement (pumps, piping, valves), aeration or oxygenation, water treatment appropriate to the system, feeding equipment, grading and handling gear, monitoring and alarms, and backup power. RAS adds mechanical filtration, biofiltration, degassing, disinfection and tighter process control. Hatchery and processing scopes are specified separately.

Which equipment should be specified before requesting quotes?

Specify the items whose sizing changes everything downstream: design biomass and stocking density, water exchange or recirculation rate, oxygen demand at peak temperature, and installed pumping head. With those four fixed, suppliers can quote aeration, filtration, pumps and power on the same basis. FishMatch calculators produce these figures and attach them to the RFQ.

Can equipment be sourced in stages?

Yes, and phased procurement is common. The usual sequence is water supply and holding infrastructure, then aeration and treatment, then automation and monitoring, then processing and cold chain. Staging works when interfaces and capacity headroom are defined at the start; otherwise later phases force replacement rather than addition.

Supplier selection criteria

How should a buyer compare aquaculture suppliers?

Compare on evidence, not on presentation: delivered projects at a similar scale and climate, engineering support during design, lead time commitments, spare-part and service availability in your region, certification and testing documentation, payment and warranty terms, and willingness to quote against your specification rather than substituting a catalogue package.

What are the warning signs in a supplier quotation?

Treat these as review triggers: no itemised scope, guaranteed biological or financial performance, no named delivery terms or lead time, no spare-parts or service statement, unclear responsibility for installation and commissioning, and equipment sizing that does not reference your water temperature, oxygen demand or biomass targets.

How does FishMatch handle supplier selection?

FishMatch is an independent sourcing layer, not a manufacturer or reseller. Requirements are structured into a single technical RFQ and routed to relevant producers; buyers receive comparable offers without supplier identities being exposed before they choose to proceed. Selection stays with the buyer — FishMatch standardises the comparison basis.

Get Free QuotesFinancing